ADI 中国在线商城焕新登场
支持非整包购买、人民币支付、报关无忧、在线客服专业高效！

点击查看详情

AD9833

量产

低功耗、12.65 mW、2.3 V至+5.5 V可编程波形发生器

数据手册 (Rev. G) 产品选型表

产品模型: 5

Viewing:

概述

数字可编程频率和相位
当供电电压为3 V时，功耗为12.65 mW
输出频率范围：0 MHz至12.5 MHz
28位分辨率（25 MHz基准时钟时为0.1 Hz）
正弦波/三角波/方波输出
2.3 V至5.5 V电源供电
无需外部元件
三线式SPI接口
扩展温度范围： -40 ℃至+105 ℃
掉电选项
10引脚MSOP封装
通过汽车应用认证

AD9833-EP支持防务和航空航天应用（AQEC标准）

下载 AD9833-EP数据手册 (pdf)
温度范围： −55 ℃至+125 ℃
受控制造基线
一个装配/测试厂
一个制造厂
增强型产品变更通知
认证数据可应要求提供
V62/14619-01XE DSCC图纸号

产品模型: 5

参考资料

DDS Design 05/13/2004

Integrated DDS Chip Takes Steps To 2.7 GHz 04/28/2004

Speedy A/Ds Demand Stable Clocks 03/22/2004

DDS IC Plus Frequency-To-Voltage Converter Make Low-Cost DAC 02/05/2004

Simple Circuit Controls Stepper Motors 01/08/2004

Two DDS ICs Implement Amplitude-shift Keying 12/25/2003

DDS Circuit Generates Precise PWM Waveforms 10/02/2003

DDS Device Produces Sawtooth Waveform 07/10/2003

400-MSample DDSs Run On Only +1.8 VDC 12/01/2002

Digital Potentiometers Vary Amplitude In DDS Devices 05/29/2000

DDS Device Provides Amplitude Modulation 09/02/1999

Basics of Designing a Digital Radio Receiver (Radio 101) 03/06/1998

产品亮点 1

Introducing Digital Up/Down Converters: VersaCOMM™ Reconfigurable Digital Converters 03/08/2008

常见问题 1

FAQ 09/30/2021

ADI 始终高度重视提供符合最高质量和可靠性水平的产品。我们通过将质量和可靠性检查纳入产品和工艺设计的各个范围以及制造过程来实现这一目标。出货产品的“零缺陷”始终是我们的目标。查看我们的质量和可靠性计划和认证以了解更多信息。

产品型号	引脚/封装图-中文版	文档	CAD 符号，脚注和 3D模型
AD9833BRMZ	10-Lead MSOP	Material Declaration Reliability Report 资料包	Ultra Librarian SamacSys
AD9833BRMZ-REEL	10-Lead MSOP	Material Declaration Reliability Report 资料包	Ultra Librarian SamacSys
AD9833BRMZ-REEL7	10-Lead MSOP	Material Declaration Reliability Report 资料包	Ultra Librarian SamacSys
AD9833SRMZ-EP-RL7	10-Lead MSOP	Material Declaration Reliability Report 资料包	Ultra Librarian SamacSys
AD9833WBRMZ-REEL	10-Lead MSOP	Material Declaration Reliability Report 资料包	Ultra Librarian SamacSys

产品型号	产品生命周期	PCN

5月 15, 2012 - 10_0006 Halogen Free Material Change for mini SOIC Products
		PCN10_0006_Form Material_Report Qualification Report Summary Qualification Report Summary
AD9833BRMZ	量产
AD9833BRMZ-REEL	量产
AD9833BRMZ-REEL7	量产
AD9833WBRMZ-REEL	量产
11月 1, 2010 - 10_0303 AD9833 Datasheet Correction
		PCN10_0303_Form Material_Report Revised Datasheet Specification
AD9833BRMZ	量产
AD9833BRMZ-REEL	量产
AD9833BRMZ-REEL7	量产
AD9833WBRMZ-REEL	量产
8月 25, 2009 - 09_0165 Test transfer of AD7683,AD7684, AD7685, AD7686, AD7942 and AD9833 from StatsChipPac Singapore (SCS) to Carsem Malaysia (CRS)
		Material_Report PCN09_0165_Form Qual Plan for PCN 09-0165
AD9833BRMZ	量产
AD9833BRMZ-REEL	量产
AD9833BRMZ-REEL7	量产
4月 3, 2019 - 19_0017 AD9833WBRMZ-REEL Assembly Site Transfer and Datasheet Specification Change
		PCN19_0017_Form Material_Report Other Delta Qualification Matrix Qualification Results Summary
AD9833WBRMZ-REEL	量产

这是最新版本的数据手册

软件资源

FPGA/HDL 2

找不到您所需的软件或驱动?

硬件生态系统

部分模型	产品周期	描述
AD9837	量产	低功耗、8.5 mW、2.3 V至5.5 V可编程波形发生器
AD9838	量产	11 mW功耗、2.3 V至5.5 V的完整DDS

工具及仿真模型

ADIsimDDS（直接数字频率合成）

ADIsimDDS利用数学公式模拟和显示选定器件的整体性能。ADIsimDDS根据参考时钟频率和所需的输出频率计算所需的FTW。该工具还对整体频谱性能估算进行模拟，允许用户探讨外部重建滤波器的效应。

打开工具

IBIS 模型 1

AD9833 IBIS Model

评估套件

AD9833 评估板

立即购买更多内容

产品详情

AD9833评估板包含SDP连接和软件，可通过SDP板控制AD9833。

资料

UG-272：评估AD9833低功耗12.65 mW、2.3 V至5.5 V可编程波形发生器
2011/4/27

AD983x GitHub no-OS Driver Source Code
2012/12/20

软件

AD9833 Evaluation Software (Rev.B)
576.37 M

ADALM2000 Companion Education Board for Mixed-Signal Learning and Prototyping

立即购买更多内容

特性和优点

ADALM2000 companion education board for hands-on mixed-signal learning and prototyping
Extends ADALM2000 with integrated signal generation, analog and digital interfacing, sensors, and user peripherals
Portable USB-powered platform that combines power supplies, adjustable references, signal generation, sensing, display support, and communication experiments on one board
Standalone Arbitrary Waveform Generator with up to ±10V maximum amplitude
Onboard ±12V power supply rails and two adjustable DC reference generators covering ±12V DC
TTL/PWM 5V clock generator with adjustable frequency and software-controlled generator interface through Arduino UNO R4
Arduino UNO R4 plug-in option for menu control, calibration, display support, CAN communication, and firmware experimentation
Compatible with ADALM1000/ADALM2000 active learning modules

产品详情

The AD-M2KCOMPEDU-EBZ is an education-focused companion board for ADALM2000-based teaching labs, demonstrations, and student projects. It brings together stimulus generation, measurement access, biasing, user controls, sensing, and communication functions in a compact USB-powered board. This helps instructors and students move from basic circuit measurements to complete mixed-signal experiments with fewer external modules.

The board is intended to complement ADALM2000 and other standard laboratory equipment. It provides analog input and output access, digital output functions, power supplies, sensors, controls, LEDs, display connectivity, a transceiver interface, adjustable voltage references, and current-source functions. Arduino UNO R4 support adds a programmable control layer for menu-driven operation, calibration routines, signal-generator control, and embedded-system exercises.

System Features:

USB-C input power with 900mA onboard current limit
ADALM2000 plug-in option
Arduino UNO R4 plug-in option
±12V onboard power supply generators with foldback current limit
Selectable +3.3V supply source: Arduino +3.3V rail or onboard local LDO
Two adjustable DC reference voltage generators, buffered, and output-current limited
Adjustable DC current-source function
Audio amplifier path for signal-conditioning and audio experiments
Onboard temperature and optical sensing, user potentiometers, switches, buttons, LEDs, and display support
CAN transceiver support for communication and control exercises
Software-controlled signal generator and calibration flow

APPLICATIONS