メニュー
閉じる
Terasic DE10-Nano Kit
概要
設計リソース
デバイス・ドライバ
Software such as C code and/or FPGA code, used to communicate with component's digital interface.
ADV7511 HDMI transmitter Linux Driver
ADXL345 - No-OS Driver for Renesas Microcontroller Platforms
ADXL345 - No-OS Driver for Microchip Microcontroller Platforms
機能と利点
- Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
- Our reference designs are supported by an intuitive design tool set and IP
- Our team can provide designs for quick prototypes that can speed time to market in the most complex applications
製品カテゴリ
使用されている製品
回路説明
| Rail/Function | Part Number | General Description of Part |
| Power Products | ||
| 1.1 V: VCCINT_FPGA 1.1V: VCC_HPS |
LTC3616 | Dual 13A or Single 26A DC/DC μModule Regulator |
| 3.3V: VCCIO_3.3V | LTC3612 | 15A DC/DC µModule regulator |
| 1.5V: VCC_DDR3 1.2V: VCC_1.2V 1.8V: VCC_1.8V |
LT3080 | 6A DC/DC µModule Regulator with Tracking and Frequency Synchronization |
| 9V: VCC_9V_Connector & Header | LT3580 | |
| Signal Chain | ||
| Analog Input (Arduino Header) | LTC2308 | Low Noise, 500ksps, 8-Channel, 12-Bit ADC |
| On-board accelerometer | ADXL345 | 3-Axis, ±2 g/±4g/±8g/±16g Digital Accelerometer |
| HDMI Output | ADV7513 | 165 MHz High Performance HDMI Transmitter |
Real-World Plug-ins for the Terasic DE10-Nano Kit
1) Arduino Plug-Ins: Circuits from the Lab
Analog Devices has developed hundreds of reference designs to help solve developers’ system level application challenges from mixed signal designs, to software drivers and algorithm development. Circuits from the Lab Reference Designs:
- Address analog, RF, and mixed-signal design challenges by applying ADI's vast applications expertise.
- Circuit designs are built and tested by the experts, to ensure both performance and function.
- Low cost hardware allows for evaluation and rapid prototyping with several development platforms.
- Thorough documentation and design files ease application understanding and minimize system integration issues.
Use the Arduino compatible headers of the DE10-Nano to plug-in a variety of precision signal chain solutions from Analog Devices. Most of these boards have firmware supported on existing Analog Devices platforms such as the ADICUP360 or ADICUP3029, and developers around the world are extending this to standard Arduino as well as the DE10-Nano environment. Be part of the story and start coding for your favorite plug-in today!
| Part Number | General Description of Part |
|
| EVAL-CN0216-ARDZ | Precision Weigh Scale |
|
| EVAL-CN0357-ARDZ | Electrochemical Gas Detection |
|
| EVAL-CN0338-ARDZ | NDIR Thermopile Gas Sensing | |
| EVAL-ADXL362-ARDZ | Ultra-Low Power Accelerometer |
|
| EVAL-CN0391-ARDZ | 4-Channel Thermocouple System |
|
| EVAL-CN0395-ARDZ | Volatile Organic Compound Gas Detector |
|
| EVAL-CN0396-ARDZ | Dual Electrochemical Gas Sensor | |
| EVAL-CN0397-ARDZ | 3-Channel Light Detection for Smart Agriculture |
|
| EVAL-CN0398-ARDZ | Soil Moisture and pH Measurement System |
|
2) QuikEval Plug-Ins: System Monitoring, Power Supplies and More
The DE10-Nano includes a 14-pin "QuikEval" header that is compatible with hundreds of Analog Devices evaluation boards from the legacy Linear Technology product lines. Some of these parts may be an "enabling technology" for your design, such as a precision ADC or DAC, or a low-noise PLL for a communications system. Other products perform critical auxiliary functions, such as system health monitoring (supply current, supply voltage, temperature etc.) or dynamically adjusting power supplies.
A fairly complete list can be obtained by searching for evaluation boards for which the DC2026 is a "companion board."
The SPI or I2C signals on the DE10-Nano's QuikEval connector are connected to the HPS side of the Cyclone 5 SoC device. This means that you will most likely communicate to these devices from within the Linux operating system running on the embedded processor. Click here for a partial list of LT/LTC parts with Linux driver available. For parts without a Linux driver, it may be possible to communicate directly through the /dev/i2c and /dev/spi device files. In both cases, there is Linduino code that can be used as a starting point for writing your own code. Linduino code is intended for porting to "bare metal" (no operating system) embedded applications, but is still useful in gaining insight into how a particular device functions.
The Linduino code library is available for download here.
| Partial List of LT / LTC Devices with Linux Driver Available | ||
| Part Number | QuikEval Board | Description |
| LTC2945 | DC1697A | 80V Rail-to-Rail System Power Monitor |
| LTC2990 | DC1338B | Temperature, Current and Voltage Monitor |
| LTC4151 | DC1208A | 80V High Side Power Monitor |
| LTC4215 | DC874A | Hot Swap Controller with Current and Voltage Monitor |
| LTC4222 | DC1134A | Dual Hot Swap Controller with Current and Voltage Monitors |
| LTC4245 | DC985A | Quad Hot Swap Controller with Current and Voltage Monitors |
| LTC4260 | DC786A | 200W Positive 48V Hot Swap Controller with Current and Voltage Monitoring |
| LTC4261 | DC998A | Negative (–48V) Hot Swap Controller with Current and Voltage Monitoring |
| LTC2485 | DC956A | 24-Bit Delta-Sigma ADC with I2C and Easy-Drive |
| LTC2497 | DC1012A | 16-Bit, 8-channel, Delta-Sigma ADC with I2C and Easy-Drive |
16-Bit 50Msps Digital-to-Analog Converter
The LTC1668 is a general purpose 16-Bit DAC with up to 50Msps update rate that is ideal for generating arbitrary waveforms with frequency content from DC to several MHz. Demonstration circuit DC2459A contains several digital interface connectors, one of which is directly pin-compatible with the GPIO headers on the DE10-Nano.
製品サンプル
|
製品 |
概要 |
サンプル提供可能な
|
| LTC1668 | 12/14/16ビット、50Msps DAC |
LTC1668CG#PBF LTC1668IG#PBF |
| LTC2497 | Easy Drive入力電流キャンセル機能およびI2Cインターフェイス付き16ビット8/16チャネル･デルタシグマ ADC |
LTC2497CUHF#PBF LTC2497IUHF#PBF |
| LTC2485 | Easy Drive 入力電流キャンセル機能およびI2Cインタフェース付き24ビット・デルタシグマADC |
LTC2485CDD#PBF LTC2485IDD#PBF |
| LTC4261 | A/DコンバータとI2Cモニタ機能を内蔵した負電圧Hot Swapコントローラ |
LTC4261CGN#PBF LTC4261CGN-2#PBF LTC4261CUFD#PBF LTC4261CUFD-2#PBF LTC4261IGN#PBF LTC4261IGN-2#PBF LTC4261IUFD#PBF LTC4261IUFD-2#PBF |
| LTC4260 | I2C互換モニタ付き正の高電圧ホットスワップ・コントローラ |
LTC4260CGN#PBF LTC4260CSW#PBF LTC4260CUH#PBF LTC4260IGN#PBF LTC4260ISW#PBF LTC4260IUH#PBF |
| LTC4245 | I2C互換モニタ付き、複数電源ホットスワップ･コントローラ |
LTC4245CG#PBF LTC4245CUHF#PBF LTC4245IG#PBF LTC4245IUHF#PBF |
| LTC4222 | I2C互換モニタ機能付きデュアルHot Swapコントローラ |
LTC4222CG#PBF LTC4222CUH#PBF LTC4222IG#PBF LTC4222IUH#PBF |
| LTC4215 | I2C互換モニタ機能付きHot Swapコントローラ |
LTC4215CGN#PBF LTC4215CUFD#PBF LTC4215CUFD-2#PBF LTC4215IGN#PBF LTC4215IUFD#PBF LTC4215IUFD-2#PBF |
| LTC4151 | 高電圧I2C電流モニタおよび電圧モニタ |
LTC4151CDD#PBF LTC4151CDD-1#PBF LTC4151CMS#PBF LTC4151CMS-1#PBF LTC4151CS-2#PBF LTC4151HDD#PBF LTC4151HMS#PBF LTC4151IDD#PBF LTC4151IDD-1#PBF LTC4151IMS#PBF LTC4151IMS-1#PBF LTC4151IS-2#PBF |
| LTC2990 | I2Cインタフェース搭載のクワッド電圧、電流、温度モニタ |
LTC2990CMS#PBF LTC2990IMS#PBF |
| LTC2945 | 範囲の広いI2C電力モニタ |
LTC2945CMS#PBF LTC2945CMS-1#PBF LTC2945CUD#PBF LTC2945CUD-1#PBF LTC2945HMS#PBF LTC2945HMS-1#PBF LTC2945HUD#PBF LTC2945HUD-1#PBF LTC2945IMS#PBF LTC2945IMS-1#PBF LTC2945IUD#PBF LTC2945IUD-1#PBF |
| ADV7513 | HDMIトランスミッタ、165MHz、高性能 | |
| ADXL345 | デジタル・加速度センサー、3軸、±2g / ±4g / ±8g / ±16g |
ADXL345BCCZ ADXL345TCCZ-EP |
| LTC2308 | 低ノイズ、500ksps、8チャネル12ビットADC |
LTC2308CUF#PBF LTC2308IUF#PBF |
| LT3580 | 2Aスイッチ、ソフトスタート、同期機能を備えた昇圧/反転DC/DCコンバータ |
LT3580EDD#PBF LT3580EMS8E#PBF LT3580HMS8E#PBF LT3580IDD#PBF LT3580IMS8E#PBF |
| LT3080 | 抵抗1本で調整可能な1.1A、低損失レギュレータ |
LT3080EDD#PBF LT3080EMS8E#PBF LT3080EQ#PBF LT3080EST#PBF LT3080ET#31PBF LT3080ET#PBF LT3080IDD#PBF LT3080IMS8E#PBF LT3080IQ#PBF LT3080IST#PBF LT3080IT#PBF |
| LTC3612 | 3A、4MHzモノリシック同期整流式降圧DC/DCコンバータ |
LTC3612EFE#PBF LTC3612EUDC#PBF LTC3612HFE#PBF LTC3612HUDC#PBF LTC3612IFE#PBF LTC3612IUDC#PBF |
| LTC3616 | 6A、4MHzモノリシック同期整流式降圧 DC/DC コンバータ |
LTC3616EUDD#PBF LTC3616HUDD#PBF LTC3616IUDD#PBF |
