Linduino is Analog Devices’ Arduino compatible system for developing and distributing firmware libraries and example code for our integrated circuits.
Linduino (DC2026) is Analog Devices’s Arduino compatible system for developing and distributing firmware libraries and example code for Analog Devices’s integrated circuits.
Upload Linduino with DC590B.ino. You can talk to the part by sending specific characters through the COM port. For example:
x = pull Chip Select Low
S = Notifying that sending 8 bits expressed as two hex characters (Hex characters must be in capital)
80 = An example of sending high byte data
S = Notifying that sending 8 bits expressed as two hex characters
00 = An example of sending low byte data
X = pull CS high, this loads the code into the DAC
This string pulls the CS low, sends 0x8000 to the DAC and pulls CS high.
If you are experiencing the following error message:
One reason could be that you had the wrong Target board selected on the Arduino IDE when uploading the DC590_emulator.ino code. To use Linduino, you have to select 'Arduino Uno' option from Tools --> Board before uploading the code.