製品概要
機能と利点
- Ultra-low distortion, high-resolution source
- DC to 40kHz
- Proprietary digital pre-distortion (DPD) algorithm
- –130dBc THD @ 1kHz (typ.)
- Arbitrary waveform generation (AWG) with on-board pattern memory
- Differential (balanced) output up to 3.6VRMS
- Fast pattern switching between multiple stored waveforms
- Small form-factor (60mm x 40mm)
- Low power, 1W typ. (quiescent)
- SPI interface for integration into test and measurement systems
製品概要
The ADMX1002 is an ultra-low distortion sinewave and high-resolution arbitrary waveform generator. This high-performance module demonstrates a proprietary digital pre-distortion algorithm that reduces signal distortion below levels that can be achieved with high-performance digital-to-analog converters (DAC) and amplifiers alone. Its differential output can be set to common-mode levels often required to test high-performance analog-to-digital converters (ADC), audio codecs, and other audio ICs and systems. With an easy-to-use SPI interface and small-form factor, the ADMX1002 can be easily embedded into test systems, or simply used on the bench for measurement and characterization.
APPLICATIONS
- High-end audio test
- Analog-to-digital converter characterization and test
- Sensor and transducer test
- Frequency response and network analysis
- ATE
はじめに
Detailed instructions are in the wiki: ADMX1002, Ultra-low Distortion and Low Noise Signal Generator [Analog Devices Wiki]
Note: Evaluation Software is available to download.
Quick start:
- Plug the ADMX1002 module into the carrier board EVAL-ADMX100x-FMCZ
- Connect the SDP-I-PMOD board with the provided PMOD cable
- Connect the SDP board to the SDP-I-PMOD interposer board
- Connect the USB cable to the host PC
- Provide power to the SDP-I-PMOD and the EVAL-ADMX100x-FMCZ with the included power adapters
- Download and install the GUI
- Launch the GUI
推奨システム動作環境
- PC running Windows 10 or newer
- EVAL-ADMX100X-FMCZ board
- SDP-I-PMOD interposer board
- SDP board
- PMOD cable
- Power adapters
- ADMX1002 Graphical User Interface (GUI)
- SDP Drivers
関連資料
購入
表示されている価格は、1個あたりの価格です。
価格は1個当たりの米ドルで、米国内における販売価格（FOB）で表示されておりますので、予算のためにのみご使用いただけます。 また、その価格は変更されることがあります。米国以外のお客様への価格は、輸送費、各国の税金、手数料、為替レートにより決定されます。価格・納期等の詳細情報については、弊社正規販売代理店または担当営業にお問い合わせください。なお、 評価用ボードおよび評価用キットの表示価格は1個構成としての価格です。