- Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
- Our reference designs are supported by an intuitive design tool set and IP
- Our team can provide designs for quick prototypes that can speed time to market in the most complex applications
|Rail/Function||Part Number||General Description of Part|
|1.1 V: VCCINT_FPGA
|LTC3616||Dual 13A or Single 26A DC/DC μModule Regulator|
|3.3V: VCCIO_3.3V||LTC3612||15A DC/DC µModule regulator|
|LT3080||6A DC/DC µModule Regulator with Tracking and Frequency Synchronization|
|9V: VCC_9V_Connector & Header||LT3580|
|Analog Input (Arduino Header)||LTC2308||Low Noise, 500ksps, 8-Channel, 12-Bit ADC|
|On-board accelerometer||ADXL345||3-Axis, ±2 g/±4g/±8g/±16g Digital Accelerometer|
|HDMI Output||ADV7513||165 MHz High Performance HDMI Transmitter|
Real-World Plug-ins for the Terasic DE10-Nano Kit
1) Arduino Plug-Ins: Circuits from the Lab
Analog Devices has developed hundreds of reference designs to help solve developers’ system level application challenges from mixed signal designs, to software drivers and algorithm development. Circuits from the Lab Reference Designs:
- Address analog, RF, and mixed-signal design challenges by applying ADI's vast applications expertise.
- Circuit designs are built and tested by the experts, to ensure both performance and function.
- Low cost hardware allows for evaluation and rapid prototyping with several development platforms.
- Thorough documentation and design files ease application understanding and minimize system integration issues.
Use the Arduino compatible headers of the DE10-Nano to plug-in a variety of precision signal chain solutions from Analog Devices. Most of these boards have firmware supported on existing Analog Devices platforms such as the ADICUP360 or ADICUP3029, and developers around the world are extending this to standard Arduino as well as the DE10-Nano environment. Be part of the story and start coding for your favorite plug-in today!
|Part Number||General Description of Part
|EVAL-CN0216-ARDZ||Precision Weigh Scale
|EVAL-CN0357-ARDZ||Electrochemical Gas Detection
|EVAL-CN0338-ARDZ||NDIR Thermopile Gas Sensing|
|EVAL-ADXL362-ARDZ||Ultra-Low Power Accelerometer
|EVAL-CN0391-ARDZ||4-Channel Thermocouple System
|EVAL-CN0395-ARDZ||Volatile Organic Compound Gas Detector
|EVAL-CN0396-ARDZ||Dual Electrochemical Gas Sensor|
|EVAL-CN0397-ARDZ||3-Channel Light Detection for Smart Agriculture
|EVAL-CN0398-ARDZ||Soil Moisture and pH Measurement System
2) QuikEval Plug-Ins: System Monitoring, Power Supplies and More
The DE10-Nano includes a 14-pin "QuikEval" header that is compatible with hundreds of Analog Devices evaluation boards from the legacy Linear Technology product lines. Some of these parts may be an "enabling technology" for your design, such as a precision ADC or DAC, or a low-noise PLL for a communications system. Other products perform critical auxiliary functions, such as system health monitoring (supply current, supply voltage, temperature etc.) or dynamically adjusting power supplies.
A fairly complete list can be obtained by searching for evaluation boards for which the DC2026 is a "companion board."
The SPI or I2C signals on the DE10-Nano's QuikEval connector are connected to the HPS side of the Cyclone 5 SoC device. This means that you will most likely communicate to these devices from within the Linux operating system running on the embedded processor. Click here for a partial list of LT/LTC parts with Linux driver available. For parts without a Linux driver, it may be possible to communicate directly through the /dev/i2c and /dev/spi device files. In both cases, there is Linduino code that can be used as a starting point for writing your own code. Linduino code is intended for porting to "bare metal" (no operating system) embedded applications, but is still useful in gaining insight into how a particular device functions.
The Linduino code library is available for download here.
|Partial List of LT / LTC Devices with Linux Driver Available|
|Part Number||QuikEval Board||Description|
|LTC2945||DC1697A||80V Rail-to-Rail System Power Monitor|
|LTC2990||DC1338B||Temperature, Current and Voltage Monitor|
|LTC4151||DC1208A||80V High Side Power Monitor|
|LTC4215||DC874A||Hot Swap Controller with Current and Voltage Monitor|
|LTC4222||DC1134A||Dual Hot Swap Controller with Current and Voltage Monitors|
|LTC4245||DC985A||Quad Hot Swap Controller with Current and Voltage Monitors|
|LTC4260||DC786A||200W Positive 48V Hot Swap Controller with Current and Voltage Monitoring|
|LTC4261||DC998A||Negative (–48V) Hot Swap Controller with Current and Voltage Monitoring|
|LTC2485||DC956A||24-Bit Delta-Sigma ADC with I2C and Easy-Drive|
|LTC2497||DC1012A||16-Bit, 8-channel, Delta-Sigma ADC with I2C and Easy-Drive|
16-Bit 50Msps Digital-to-Analog Converter
The LTC1668 is a general purpose 16-Bit DAC with up to 50Msps update rate that is ideal for generating arbitrary waveforms with frequency content from DC to several MHz. Demonstration circuit DC2459A contains several digital interface connectors, one of which is directly pin-compatible with the GPIO headers on the DE10-Nano.
|LTC1668||16 位、50Msps DAC||
|LTC2497||具 Easy Drive 输入电流抵消功能和 I2C 接口的 16 位、8 通道 / 16 通道 ΔΣ ADC||
|LTC2485||具 Easy Drive 输入电流抵消功能和 I2C 接口的 24 位 ΔΣ ADC||
|LTC4261||具 ADC 和 I2C 监视功能的负电压热插拔控制器||
|LTC4260||具 I2C 兼容型监视功能的正高电压热插拔控制器||
|LTC4245||具 I2C 兼容型监视功能的多电源热插拔控制器||
|LTC4222||具 I2C 兼容型监视功能的双通道热插拔控制器||
|LTC4215||具有 I2C 兼容型监视功能的热插拨控制器||
|LTC4151||高电压 I2C 电流和电压监视器||
|LTC2990||四路 I2C 电压、电流和温度监视器||
|LTC2945||宽范围 I2C 功率监视器||
|ADXL345||3轴、±2 G/±4 G/±8 G/±16 G数字加速度计||
|LTC2308||低噪声、500ksps、8 通道、12 位 ADC||
|LT3580||具 2A 开关、软起动和同步功能的升压/负输出 DC/DC 转换器||
|LTC3612||3A、4MHz、单片式同步降压型 DC/DC 转换器||
|LTC3616||6A、4MHz、单片式同步降压型 DC/DC 转换器||