New Products Listing

Analog Devices is committed to delivering the most innovative products that sense, measure, connect, interpret, power and secure to help you solve your toughest design problems and create solutions that are Ahead of What's Possible. The newest products from some of the best designers in the world are listed below.

Sign up for myAnalog and get the latest products straight to your inbox.

  • All [33]
  • Amplifiers [6]
  • Data Converters [9]
  • Interface ICs [2]
  • Motors & Motion Control [2]
  • Power Management [12]
  • Sensors [1]
  • Switch ICs & Multiplexers (Muxes) [1]
All [33]
Part Number
Data Sheet
Status
Description

Amplifiers

6
RECOMMENDED FOR NEW DESIGNS
5V, Low Power, CMOS, Rail-to-Rail Input/Output, Operational Amplifier
RECOMMENDED FOR NEW DESIGNS
5V, Precision, Low Noise, Zero-Drift Operational Amplifier
RECOMMENDED FOR NEW DESIGNS
24V, 110MHz FastFET Operational Amplifier
RECOMMENDED FOR NEW DESIGNS
100MHz to 31GHz, High Survivability, Low Noise Amplifier
RECOMMENDED FOR NEW DESIGNS
Aerospace, >1.5 W (34 dBm), 24 GHz to 34 GHz Power Amplifier
RECOMMENDED FOR NEW DESIGNS
30V, Low Noise, Precision Operational Amplifier

Data Converters

9
RECOMMENDED FOR NEW DESIGNS
25MHz Isolated ADC with Sigma-Delta Modulated Bit Stream Output
RECOMMENDED FOR NEW DESIGNS
High-Voltage Liquid Lens Driver
RECOMMENDED FOR NEW DESIGNS
Dual-Channel 16-Bit, 40MSPS, SAR ADC with Analog Front End
RECOMMENDED FOR NEW DESIGNS
50MHz Isolated ADC with Sigma-Delta Modulated Bit Stream Output
RECOMMENDED FOR NEW DESIGNS
Quad-Channel, Software Configurable Input and Output with HART Modem
RECOMMENDED FOR NEW DESIGNS
20-Bit, 2MSPS/500kSPS Dual-Channel SAR ADCs
RECOMMENDED FOR NEW DESIGNS
20-Bit, 2MSPS/500kSPS Dual-Channel SAR ADCs
RECOMMENDED FOR NEW DESIGNS
Ultra-Low Power, 4-Channel Biopotential and Bioimpedance AFE
RECOMMENDED FOR NEW DESIGNS
12-Bit, 6 GSPS/10.25 GSPS, RF Analog-to-Digital Converter

Interface ICs

2
RECOMMENDED FOR NEW DESIGNS
Power Line Communication with ModelGauge Fuel Gauge and Buck-Boost Converter
RECOMMENDED FOR NEW DESIGNS
Robust, Industrial, Low Power 10BASE-T1S MAC-PHY

Motors & Motion Control

2
RECOMMENDED FOR NEW DESIGNS
16V, 1.4ARMS, Ultra-Small Stepper Driver and Controller
RECOMMENDED FOR NEW DESIGNS
16V, 1.4ARMS, Ultra-Small Stepper Driver and Controller

Power Management

12
RECOMMENDED FOR NEW DESIGNS
24A, 4V, Single-Phase or Dual-Phase, Silent Switcher Step-Down Regulators with Digital Power System Management
RECOMMENDED FOR NEW DESIGNS
Ultra-Low Quiescent Current, 100mA, CMOS Linear Regulators
RECOMMENDED FOR NEW DESIGNS
Quad, 40VIN, Silent Switcher μModule Regulator with Configurable 3A Output Array
RECOMMENDED FOR NEW DESIGNS
–20V, −200mA, Low-Noise Linear Regulator
RECOMMENDED FOR NEW DESIGNS
Dual 1.3A, 1.2MHz Boost/Inverter in 3mm × 3mm DFN
RECOMMENDED FOR NEW DESIGNS
100V Half-Bridge GaN Driver with Single-Pin, Three-State PWM Input, Smart Integrated Bootstrap S witch, and Adjustable Dead Time
RECOMMENDED FOR NEW DESIGNS
72V, Parallelable, 4-Switch Buck-Boost Controller for GaN FETs and Si MOSFETs
PRODUCTION
Automotive 36V, 8A/10A Fully Integrated Buck Converters with 10μA Quiescent Current and Dual-Phase Capability
PRODUCTION
Automotive 36V, 8A/10A Fully Integrated Buck Converters with 10μA Quiescent Current and Dual-Phase Capability
RECOMMENDED FOR NEW DESIGNS
2.6V to 5.5V, 20A Hot-Swap E-Fuse with Current Report Output
RECOMMENDED FOR NEW DESIGNS
Power Line Communication with ModelGauge Fuel Gauge and Charger
RECOMMENDED FOR NEW DESIGNS
135V Synchronous Buck Controller with Symmetrical Sink/Source Capability and Dynamically Adjustable Output Voltage Programming

Sensors

1
RECOMMENDED FOR NEW DESIGNS
Low Noise, Low Power, Wide Bandwidth, 3-Axis MEMS Accelerometer

Switch ICs & Multiplexers (Muxes)

1
RECOMMENDED FOR NEW DESIGNS
Picoamp Ultra-Low Leakage, Low Voltage, Quad SPST Switch