ADRF5470

PRE-RELEASE

Die on Carrier, Silicon Digital Attenuator, 2 dB LSB,5-Bit, 100 MHz to 22 GHz

Viewing:

Overview

  • Wideband frequency range: 100 MHz to 22 GHz
  • Attenuation range: 46 dB with 2 dB steps
  • Low insertion loss
    • 1.5 dB typical up to 10 GHz
    • 1.9 dB typical up to 20 GHz
  • High attenuation accuracy
    • +(0.1 + 0.5% of attenuation state) typical up to 10 GHz
    • −(0.1 + 1.5% of attenuation state) typical up to 10 GHz
    • +(0.1 + 0.5% of attenuation state) typical up to 20 GHz
    • −(0.1 + 4.0% of attenuation state) typical up to 20 GHz
  • Low step error
    • ±0.2 dB typical up to 10 GHz
    • ±0.3 dB typical up to 20 GHz
  • High input linearity
    • P0.1dB: >27 dBm typical at all attenuation states
    • P1dB: >30 dBm typical at all attenuation states
    • IP3: >47 dBm typical at all attenuation states
  • High RF power handling
    • 24 dBm steady state average
    • 30 dBm steady state peak
  • Consistent return loss at all attenuation states
  • Tight distribution in relative phase
  • No low frequency spurious signals
  • Parallel mode control, CMOS/LVTTL compatible
  • RF amplitude settling time (0.1 dB of final RF output): 130 ns
  • 18-pad, 3.196 mm × 1.841 mm, die on carrier [CHIP]
ADRF5470
Die on Carrier, Silicon Digital Attenuator, 2 dB LSB,5-Bit, 100 MHz to 22 GHz
ADRF5470 Functional Block Diagram ADRF5470 Pin Configuration ADRF5470 Chip Illustration
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Tools & Simulations

Latest Discussions

No discussions on ADRF5470 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed