The ADP122/ADP123 are low quiescent current, low dropout linear regulators. They are designed to operate from an input voltage between 2.3 V and 5.5 V and to provide up to 300 mA of output current. The low 85 mV dropout voltage at a 300 mA load improves efficiency and allows operation over a wide input voltage range.
The low 170 μA of quiescent current at full load makes the ADP122 ideal
続きを見る
The ADP122/ADP123 are low quiescent current, low dropout linear regulators. They are designed to operate from an input voltage between 2.3 V and 5.5 V and to provide up to 300 mA of output current. The low 85 mV dropout voltage at a 300 mA load improves efficiency and allows operation over a wide input voltage range.
The low 170 μA of quiescent current at full load makes the ADP122 ideal
続きを見る
The ADP150 is an ultralow noise (9 μV), low dropout, linear
regulator that operates from 2.2 V to 5.5 V and provides up to
150 mA of output current. The low 105 mV dropout voltage at
150 mA load improves efficiency and allows operation over a
wide input voltage range.
Using an innovative circuit topology, the ADP150 achieves
ultralow noise performance without the necessity of
続きを見る
Powering FPGAs - Learn the Basics Learn about the special power requirements for FPGAs and the appropriate power products used to ensure trouble free operation.
Power Management Download Tools:
Excel-based tools that generate a power supply design with a schematic, bill of materials, and performance specifications. The basis for ADIsimPower.
Power Chains: Simplified power management signal chains
データシート Rev 0, 10/2009 (pdf 609kB)
