Overview

Features and Benefits

  • Operating RF frequency
    30 MHz to 2 GHz
  • Voltage conversion gain > 4 dB
  • 60 MHz to 4 GHz
  • Input IP3: 31 dBm @ 900 MHz
  • Input IP2: 62 dBm @ 900 MHz
  • Input P1dB: 13 dBm @ 900 MHz
  • Noise figure (NF)
    12.0 dB @ 140 MHz
    14.7 dB @ 900 MHz
  • LO input at 2 × fLO
  • Quadrature demodulation accuracy
    Phase accuracy ~0.4°
    Amplitude balance ~0.05 dB
  • Demodulation bandwidth ~240 MHz
  • Baseband I/Q drive 2 Vp-p into 200 Ω
  • Single 5 V supply

Product Details

The ADL5387 is a broadband quadrature I/Q demodulator that covers an RF/IF input frequency range from 30 MHz to 2 GHz. With a NF = 13.2 dB, IP1dB = 12.7 dBm, and IIP3 = 32 dBm @ 450 MHz, the ADL5387 demodulator offers outstanding dynamic range suitable for the demanding infrastructure direct-conversion requirements. The differential RF/IF inputs provide a well-behaved broadband input impedance of 50 Ω and are best driven from a 1:1 balun for optimum performance.

Ultrabroadband operation is achieved with a divide-by-2 method for local oscillator (LO) quadrature generation. Over a wide range of LO levels, excellent demodulation accuracy is achieved with amplitude and phase balances ~0.05 dB and ~0.4°, respectively. The demodulated in-phase (I) and quadrature (Q) differential outputs are fully buffered and provide a voltage conversion gain of >4 dB. The buffered baseband outputs are capable of driving a 2 Vp-p differential signal into 200 Ω.

The fully balanced design minimizes effects from second-order distortion. The leakage from the LO port to the RF port is <−70 dBc. Differential dc-offsets at the I and Q outputs are <10 mV. Both of these factors contribute to the excellent IIP2 specifications > 60 dBm.

The ADL5387 operates off a single 4.75 V to 5.25 V supply. The supply current is adjustable with an external resistor from the BIAS pin to ground.

The ADL5387 is fabricated using the Analog Devices, Inc. advanced silicon-germanium bipolar process and is available in a 24-lead exposed paddle LFCSP.

APPLICATIONS

  • QAM/QPSK RF/IF demodulators
  • W-CDMA/CDMA/CDMA2000/GSM
  • Microwave point-to-(multi)point radios
  • Broadband wireless and WiMAX
  • Broadband CATVs

Product Lifecycle icon-recommended Production

At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.

Evaluation Kits (1)

Tools & Simulations

Design Tools

ADIsimPLL™

ADIsimPLL enables the rapid and reliable evaluation of new high performance PLL products from ADI. It is the most comprehensive PLL Synthesizer design and simulation tool available today. Simulations performed include all key non-linear effects that are significant in affecting PLL performance. ADIsimPLL removes at least one iteration from the design process, thereby speeding the design- to-market.

ADIsimRF

ADIsimRF is an easy-to-use RF signal chain calculator. Cascaded gain, noise, distortion and power consumption can be calculated, plotted and exported for signal chains with up to 50 stages. ADIsimRF also includes an extensive data base of device models for ADI’s RF and mixed signal components.

Reference Designs (2)

Product Recommendations

ADL5387 Companion Parts

Recommended Baseband Driver Amplifiers

Recommended Dual Analog-to-Digital Converters

  • For 16-bit performance, low power and high sampling rate: AD9268, AD9650.
  • For 14-bit performance, low power and high sampling rate: AD9258, AD9251.
  • For 16-bit performance, continuous time sigma delta architecture with integrated QEC: AD9262.
  • For 12-bit performance, low power, low cost and ease of use: AD9231.
  • For 16-bit performance, multistage differential pipeline architecture with integrated quadrature error correction (QEC): AD9269.

Recommended PLL's

  • For higher performance, higher frequency and faster locktimes: ADF4106, ADF4156.
  • For high performance with integrated VCO: ADF4350.

Design Resources

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

PCN-PDN Information

Sample & Buy


See our Ordering FAQs for answers to questions about online orders, payment options and more.

 

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.


Price Table Help

 

Evaluation Boards

Pricing displayed is based on 1-piece.

Up to two boards can be purchased through Analog.com. To order more than two, please purchase through one of our listed distributors.

Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.