adp1147

过期

High Efficiency Step-Down Switching Regulator Controllers

Viewing:

概述

  • Greater Than 95% Efficiency
  • Shutdown Pin
  • Current Mode Switching Architecture Provides Superior Load and Line Transient Response
  • Low Dropout Voltage
  • Low Standby Current 160 µA typ
  • Wide Input Voltage Range 3.5 V* to 16 V
  • Low Cost
  • User Defined Current Limit
  • Available in 8-Lead PDIP
    or 8-Lead SOIC
  • Short Circuit Protection

The ADP1147 is part of a family of High Efficiency Step-Down Switching Regulators. These regulators offer superior load and line transient response, a user defined current limit and an automatic power savings mode. The automatic power savings mode is used to maintain efficiency at lower output currents. The ADP1147 incorporates a constant off-time, current mode switching architecture to drive an external P-channel MOSFET at frequencies up to 250 kHz. Constant off-time switching erates a constant ripple current in the external inductor. This results in a wider input voltage operating range of 3.5 V* to 16 V, and a less complex circuit design.

*3.5 volt operation is for the ADP1147-3.3.

adp1147
High Efficiency Step-Down Switching Regulator Controllers
pdp-image-unavailable
添加至 myAnalog

将产品添加到myAnalog 的现有项目或新项目中(接收通知)。

创建新项目
提问

参考资料

了解更多
添加至 myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

创建新项目

软件资源

找不到您所需的软件或驱动?

申请驱动/软件

最新评论

需要发起讨论吗? 没有关于 ADP1147的相关讨论?是否需要发起讨论?

在EngineerZone®上发起讨论

近期浏览