Add to Signal Chain Designer

ADP5061:  Tiny I2C Programmable Linear Battery Charger with Power Path and USB Mode Compatibility

Product Details

Product Status:Recommended for New Designs

The ADP5061 charger is fully compliant with USB 3.0 and the USB Battery Charging Specification 1.2 and enables charging via the mini USB VBUS pin from a wall charger, car charger, or USB host port.

The ADP5061 operates from a 4 V to 6.7 V input voltage range but is tolerant of voltages up to 20 V. The 20 V voltage tolerance alleviates the concerns about the USB bus spiking during dis-connect or connect scenarios.

The ADP5061 features an internal FET between the linear charger output and the battery. This permits battery isolation and, hence, system powering under a dead battery or no battery scenario, which allows for immediate system function on connec-tion to a USB power supply.

Based on the type of USB source, which is detected by an external USB detection chip, the ADP5061 can be set to apply the correct current limit for optimal charging and USB compliance.

The ADP5061 has three factory programmable digital input/output pins that provide maximum flexibility for different systems. These digital input/output pins permit combinations of features such as, input current limits, charging enable and disable, charging current limits, and a dedicated interrupt output pin.

APPLICATIONS

  • Digital still cameras
  • Digital video cameras
  • Single cell Li-Ion portable equipment
  • PDA’s, audio, GPS Devices
  • Portable medical devices
  • Mobile phones

FEATURES and BENEFITS

  • 2.6mm x 2mm WLCSP Package
  • Fully programmable via I2C
  • Flexible digital control inputs
  • Up to 2.1 A current from an ac charger in LDO mode
  • Operating input voltage from 4.0 V up to 6.7 V
  • Tolerant input voltage -0.5 V to +20 V (USB VBUS)
  • Fully compatible with USB 3.0 and USB Battery Charging Specification 1.2
  • Built-in current sensing and limiting
  • Down to 30 mΩ battery isolation FET between battery and charger output
  • Thermal regulation prevents over heating
  • Compliant with JEITA 1 and JEITA 2 Li-Ion battery charging temperature specifications
  • SYS_EN flag permits the system to be disabled until battery is at minimum required level for guaranteed system start-up.

Typical Application Circuit Diagram for ADP5061

Evaluation Kits & Symbols & Footprints

Evaluation Boards & KitsView the Evaluation Boards and Kits page for documentation and purchasing

Symbols and Footprints— Analog Devices offers Symbols & Footprints which are compatible with a large set of today’s CAD systems for broader and easier support.

SampleSample & Buy

Price, packaging, availability

ADP5061 Model Options
Model Package Pins Temp.
Range
Packing,
Qty
Price*(100-499) Price*1000 pcs RoHS View PCN/ PDN Check Inventory/
Purchase/Sample
ADP5061ACBZ-1-R7 Status: Pre-Release 20 Ball WLCSP (2.595 x 1.995) 20 Ind Reel, 3000 - - Y  Material Info Notify Me Contact ADI
ADP5061ACBZ-2-R7 Status: Production 20 Ball WLCSP (2.595 x 1.995) 20 Ind Reel, 3000 - $1.50 Y  Material Info Notify Me Purchase Sample
ADP5061ACBZ-3-R7 Status: Pre-Release 20 Ball WLCSP (2.595 x 1.995) 20 Ind Reel, 3000 - - Y  Material Info Notify Me Contact ADI
ADP5061ACBZ-4-R7 Status: Production 20 Ball WLCSP (2.595 x 1.995) 20 Ind Reel, 3000 - $1.50 Y  Material Info Notify Me Purchase Sample
ADP5061ACBZ-5-R7 Status: Production CHIPS W/SOLDER BUMPS/WLCSP 20 Ind Reel, 3000 - $1.50 Y  Material Info Notify Me Purchase Sample
Price Table Help

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

ADP5061 Evaluation Board
Model Description Price RoHS View PCN/ PDN Check Inventory/
Purchase/Sample
ADP5061CB-EVALZ Status: Production Evaluation Board $60.00 Yes -
USB-SDP-CABLEZ Status: Production Evaluation Baord $89.00 Yes -

Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.

Check Inventory & Purchase

View Sales and Distribution Offices

沪ICP备09046653号
content here.
content here.

Review this Product

Close