Add to Signal Chain Designer

ADAS3022:  16-Bit, 1 MSPS, 8 Channel Data Acquisition System

Product Details

Product Status:Recommended for New Designs

The ADAS3022 is a complete 16-bit, 1 MSPS, successive approximation–based analog-to-digital data acquisition system, which is manufactured on Analog Devices, Inc., proprietary iCMOS® high voltage industrial process technology. The device integrates an 8-channel, low leakage multiplexer; a high impedance programmable gain instrumentation amplifier (PGIA) stage with high common-mode rejection; a precision, low drift 4.096 V reference and buffer; and a 16-bit charge redistribution analog-to-digital converter (ADC) with successive approximation register (SAR) architecture. The ADAS3022 can resolve eight single-ended inputs or four fully differential inputs up to ±24.576 V when using ±15 V supplies. In addition, the device can accept the commonly used bipolar differential, bipolar single-ended, pseudo bipolar, or pseudo unipolar input signals, as shown in Table 1, thus enabling the use of almost any direct sensor interface.

The ADAS3022 simplifies design challenges by eliminating signal buffering, level shifting, amplification/attenuation, common-mode rejection, settling time, and any other analog signal conditioning challenge while allowing a smaller form factor, faster time to market, and lower cost.

  • Multichannel data acquisition and system monitoring
  • Process control
  • Power line monitoring
  • Automated test equipment
  • Instrumentation


  • Ease of use—16-bit, 1 MSPS complete data acquisition system
  • High impedance, 8-channel input: >500 MΩ
  • Differential input voltage range: ±24.576 V maximum
  • High input common-mode rejection > 100 dB
  • User programmable input ranges
  • Channel sequencer with individual channel gains
  • On-chip 4.096 V reference and buffer
  • Auxiliary input – direct interface to PulSAR ADC inputs
  • No latency/pipeline delay (SAR architecture)
  • Serial 4-wire, 1.8 V to 5 V SPI-/SPORT-compatible interface
  • LFCSP package (6 mm × 6 mm)
  • −40°C to +85°C industrial temperature range

ADAS3022 Functional Block Diagram

Similar Products

High Resolution - Simultaneous Sampling14/16/18-Bit PulSAR ADCs
High Resolution - Muxed 14/16-Bit PulSAR ADCs

Video: ADAS3022 16-Bit 1MSPS DAQ

Design Tools,Models,Drivers & Software

Title Content Type File Type
ADAS3022 FPGA Reference Design Design Tool HTML
ADAS3022/ADAS3023 IBIS Model  (ibs) IBIS Models IBS

Evaluation Kits & Symbols & Footprints

Evaluation Boards & KitsView the Evaluation Boards and Kits page for documentation and purchasing

Symbols and Footprints— Analog Devices offers Symbols & Footprints which are compatible with a large set of today’s CAD systems for broader and easier support.

Product Recommendations & Reference Designs

Engineered. Tested. Ready to Integrate.
Learn More

Companion Products

Suggested Companion Products

Recommended Driver Amplifiers for the ADAS3022
  • For low frequency, precision, low bias current applications, we recommend the AD8476, AD8605, or the AD8615.
Recommended External Voltage References for the ADAS3022
  • For low drift, low noise and high accuracy, we recommend the ADR434, ADR444 or the ADR4540 (4.096V) references.
  • For driving the voltage reference input, we recommend the AD8031 or the AD8605 buffer amplifiers.

Recommended Digital Isolators for the ADAS3022

  • For SPI Interface, lowest power, 2.5 kVrms isolation, we recommend the ADuM1401.
  • For SPI Interface, enhanced system-level ESD performance, 2.5 kVrms isolation, we recommend the ADuM3401.
  • For SPI Interface, low power, 5.0 kVrms isolation, we recommend the ADuM4401.
  • For SPI Interface, smallest package, low voltage I/O (1.8 V to 5.5 V), we recommend the ADuM3481.
Recommended Low Dropout Regulators and Switchers for the ADAS3022 Recommended Power Solutions
  • For selecting voltage regulator products, use ADIsimPower.

Were these recommendations helpful?

SampleSample & Buy

Price, packaging, availability

ADAS3022 Model Options
Price Table Help

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

ADAS3022 Evaluation Kit
Model Description Price RoHS View PCN/ PDN Check Inventory/
EVAL-ADAS3022EDZ Status: Production Evaluation Board $99.00 Yes -
EVAL-CED1Z Status: Production Development Board $249.00 Yes -

Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.

Check Inventory & Purchase

View Sales and Distribution Offices

content here.
content here.

Review this Product