概览

优势和特点

  • Supports High Data Rates: up to 13 Gbps
  • Single-Ended Inputs
  • Differential & Single-Ended Outputs
  • Propagation Delay: 125 ps
  • Fast Rise & Fall Times: 22 / 22 ps
  • Programmable Differential
    Output Voltage Swing: 600 - 1200 mV
  • Low Power Consumption: 250 mW typ.
  • Single Supply: +3.3V
  • 16 Lead Ceramic 3x3mm
    SMT Package: 9mm²

产品详情

The HMC748 is a 2:1 Selector designed to support data transmission rates of up to 13 Gbps, and selector port operation of up to 13 GHz. The selector routes one of the two single-ended inputs to the differential output upon assertion of the proper select port. The HMC748 also features an output level control pin, VR, which allows for loss compensation or for signal level optimization.

All single-ended input signals to the HMC748 are terminated with 50 ohms to Vcc on-chip, and may be either AC or DC coupled. The outputs of the HMC748 may be operated either differentially or single-ended. Inputs or outputs can be connected directly to a 50 ohm to Vcc terminated system, while DC blocking capacitors may be used if the terminating system is 50 ohms to ground. The HMC748 operates from a single +3.3V DC supply and is housed in a ceramic RoHS compliant 3x3 mm SMT package.

Applications

  • 2:1 Multiplexer up to 13 Gbps
  • RF ATE Applications
  • Broadband Test & Measurement
  • Serial Data Transmission up to 13 Gbps
  • Redundant Path Switching
  • Built-in Test

产品生命周期 icon-recommended 推荐新设计使用

本产品已上市。数据手册包含所有最终性能规格和工作条件。ADI公司推荐新设计使用这些产品。

评估套件 (1)

工具及仿真模型

IBIS模型

设计资源

ADI始终把满足您最高可靠性水平的产品放在首要位置。我们通过在所有产品、工艺设计和制造过程中引入高质量和可靠性检查实践这一承诺。发运的产品实现“零缺陷”始终是我们的目标。

样片申请及购买

电脑版网站提供样片和购买功能
返回
查询库存

这里所列出的美国报价单仅供预算参考,指美元报价(规定订量的每片美元,美国离岸价),如有修改不再另行通知。由于地区关税、商业税、汇率及手续费原因,国际报价可能不同。对于特殊批量报价,请与您当地的ADI公司办事处或代理商联络。对于评估板和套件的报价是指一个单位价格。


价格表帮助

 

购买评估板 所示报价为单片价格
以上块评估板您均可以已通过 analog.com 获取。如超过单片的数量,请通过代理商进行购买。
所示报价为单片价格。所列的美国报价单仅供预算参考,指美元报价(每片美国离岸价),如有修改恕不另行通知。由于地区关税、商业税、汇率及手续费原因,国际报价可能不同。