AD9953

推荐用于新设计

400 MSPS、14位DAC、1.8 V CMOS直接数字频率合成器

数据手册 (Rev. B) 产品选型表

产品模型: 2

Viewing:

概述

400 MSPS内部时钟速度
集成14位数模转换器
32位调谐字
相位噪声 ≤ –120 dBc/Hz（1 kHz偏移，DAC输出）
出色的动态性能>80 dB SFDR
（AOUT为160 MHz ± 100 kHz偏移时）
串行I/O控制

1.8 V电源
软件与硬件控制省电功能
48引脚TQFP/EP封装
支持大部分数字输入的5 V输入电平
PLL REFCLK乘法器（4x至20x）
欲了解更多特性，请参考数据手册

产品模型: 2

参考资料

DDS Design 05/13/2004

DDS Simplifies Polar Modulation 08/05/2004

DDS IC Plus Frequency-To-Voltage Converter Make Low-Cost DAC 02/05/2004

The Year of the Waveform Generator 12/01/2005

Simple Circuit Controls Stepper Motors 01/08/2004

Synchronized Synthesizers Aid Multichannel Systems 09/20/2005

Speedy A/Ds Demand Stable Clocks 03/22/2004

400-MSample DDSs Run On Only +1.8 VDC 12/01/2002

ADI Buys Korean Mobile TV Chip Maker 06/07/2006

Video Portables and Cameras Get HDMI Outputs 04/13/2007

Two DDS ICs Implement Amplitude-shift Keying 12/25/2003

Basics of Designing a Digital Radio Receiver (Radio 101) 03/06/1998

产品亮点 1

Introducing Digital Up/Down Converters: VersaCOMM™ Reconfigurable Digital Converters 03/08/2008

常见问题 1

FAQ 09/30/2021

ADI 始终高度重视提供符合最高质量和可靠性水平的产品。我们通过将质量和可靠性检查纳入产品和工艺设计的各个范围以及制造过程来实现这一目标。出货产品的“零缺陷”始终是我们的目标。查看我们的质量和可靠性计划和认证以了解更多信息。

产品型号	引脚/封装图-中文版	文档	CAD 符号，脚注和 3D模型
AD9953YSVZ	48-Lead TQFP (7mm x 7mm w/ EP)	Material Declaration Reliability Report 资料包	Ultra Librarian SamacSys
AD9953YSVZ-REEL7	48-Lead TQFP (7mm x 7mm w/ EP)	Material Declaration Reliability Report 资料包	Ultra Librarian SamacSys

产品型号	产品生命周期	PCN

6月 16, 2009 - 09_0027 Conversion to Laser Mark for the LQFP Packages (Single Grades)
		adi48lqfp Form Material_Report
AD9953YSVZ
AD9953YSVZ-REEL7	量产

这是最新版本的数据手册

软件资源

找不到您所需的软件或驱动?

申请驱动/软件

工具及仿真模型

ADIsimDDS（直接数字频率合成）

ADIsimDDS利用数学公式模拟和显示选定器件的整体性能。ADIsimDDS根据参考时钟频率和所需的输出频率计算所需的FTW。该工具还对整体频谱性能估算进行模拟，允许用户探讨外部重建滤波器的效应。

打开工具

LTspice^®是一款强大高效的免费仿真软件、原理图采集和波形观测器，为改善模拟电路的仿真提供增强功能和模型。

评估套件

Evaluating the AD9953 400MSPS, 14-Bit, 1.8V CMOS, Direct Digital Synthesizer

立即购买更多内容

特性和优点

Full-featured evaluation board for the AD9953
PC evaluation software for control and measurement of the AD9953
USB interface
GUI software with frequency sweep capability for board control and data analysis
Factory tested and ready to use

产品详情

This user guide takes users through the setup and use of the AD9953/PCBZ-SDP-K1 evaluation board. The AD9953 is a direct digital synthesizer (DDS) that uses advanced technology, coupled with an internal high-speed, high-performance digital-to-analog converter (DAC) to form a complete, digitally programmable, high-frequency synthesizer capable of generating a frequency agile, analog output, sinusoidal waveform at up to 200MHz with many user-programmable functions.

The Analog Devices, Inc., Analysis | Control | Evaluation (ACE) Software provides a graphical user interface (GUI) for simple communication with the AD9953. The AD9953/PCBZ-SDP-K1 requires the use of an SDP-K1 controller board, which is not supplied with the evaluation board kit and must be purchased separately. The SDP-K1 controller board, along with the use of the ACE Software, allows users the ability to program the software.

The AD9953/PCBZ-SDP-K1 uses the same evaluation board as the AD9954/PCBZ-SDP-K1 with the only difference being the device on the board.

For full details on the AD9953, see the AD9953 data sheet, which must be consulted in conjunction with this user guide when using the AD9953/PCBZ-SDP-K1.

资料

EVAL-AD9953 User Guide: Evaluating the AD9953 400MSPS, 14-Bit, 1.8V CMOS, Direct Digital Synthesizer (Rev.0)
2026/7/22

EVAL-AD9953 - Design Files
2026/7/22

AD9953

概述

参考资料

数据手册 1

应用笔记 20

技术文章 21

产品亮点 1

常见问题 1

产品亮点 1

在线研讨会 2

软件资源

找不到您所需的软件或驱动?

工具及仿真模型

ADIsimDDS（直接数字频率合成）

评估套件

特性和优点

产品详情

资料

最新评论

近期浏览