AD9951

推荐用于新设计

400 MSPS、14位DAC、1.8 V CMOS直接数字频率合成器

Viewing:
产品技术资料帮助

ADI公司所提供的资料均视为准确、可靠。但本公司不为用户在应用过程中侵犯任何专利权或第三方权利承担任何责任。技术指标的修改不再另行通知。本公司既没有含蓄的允许,也不允许借用ADI公司的专利或专利权的名义。本文出现的商标和注册商标所有权分别属于相应的公司。

概述

  • 400 MSPS内部时钟速度
  • 集成14位数模转换器(DAC)
  • 32位调谐字
  • 相位噪声:≤ −120 dBc/Hz(1 kHz偏移,DAC输出)
  • 出色的动态性能
    >80 dB SFDR(AOUT为160 MHz,±100 kHz偏移时)
  • 串行I/O控制
  • 1.8V电源
  • 软件和硬件控制的断电功能
  • 48引脚TQFP/EP封装
  • 支持大部分数字输入的5 V输入电平
  • 锁相环(PLL) REFCLK乘法器(4x至20x)
  • 单晶体驱动的内部振荡器
  • 相位调制功能
  • 多器件同步

AD9951
400 MSPS、14位DAC、1.8 V CMOS直接数字频率合成器
AD9951 Functional Block Diagram AD9951 Pin Configuration
添加至 myAnalog

将产品添加到myAnalog 的现有项目或新项目中(接收通知)。

创建新项目
提问

参考资料

数据手册 1

用户手册 1

应用笔记 17

技术文章 21

产品亮点 1

常见问题 1

了解更多
添加至 myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

创建新项目

软件资源

找不到您所需的软件或驱动?

申请驱动/软件

工具及仿真模型

ADIsimDDS(直接数字频率合成)

ADIsimDDS利用数学公式模拟和显示选定器件的整体性能。ADIsimDDS根据参考时钟频率和所需的输出频率计算所需的FTW。该工具还对整体频谱性能估算进行模拟,允许用户探讨外部重建滤波器的效应。

打开工具
LTspice

LTspice®是一款强大高效的免费仿真软件、原理图采集和波形观测器,为改善模拟电路的仿真提供增强功能和模型。


评估套件

eval board
EVAL-AD9951

Evaluating the AD9951 400MSPS, 14-Bit, 1.8V CMOS, Direct Digital Synthesizer

特性和优点

  • Full-featured evaluation board for the AD9951
  • PC evaluation software for control and measurement of the AD9951
  • USB interface
  • GUI software with frequency sweep capability for board control and data analysis
  • Factory tested and ready to use

产品详情

This user guide takes users through the setup and use of the AD9951/PCBZ-SDP-K1 evaluation board. The AD9951 is a direct digital synthesizer (DDS) that uses advanced technology, coupled with an internal high-speed, high-performance digital-to-analog converter (DAC) to form a complete, digitally programmable, high-frequency synthesizer capable of generating a frequency agile, analog output, sinusoidal waveform at up to 160MHz with many user-programmable functions.

The Analog Devices, ACE Software provides a graphical user interface (GUI) for simple communication with the AD9951. The AD9951/PCBZ-SDP-K1 requires the use of an SDP-K1 controller board, which is not supplied with the evaluation board kit and must be purchased separately. The SDP-K1 controller board, along with the use of the ACE Software, allows users the ability to program the software.

The AD9951/PCBZ-SDP-K1 uses the same evaluation board as the AD9954/PCBZ-SDP-K1 with the only difference being the device on the board.

For full details on the AD9951, see the AD9951 data sheet, which must be consulted in conjunction with this user guide when using the AD9951/PCBZ-SDP-K1.

EVAL-AD9951
Evaluating the AD9951 400MSPS, 14-Bit, 1.8V CMOS, Direct Digital Synthesizer
EVAL-AD9951 Evaluation Board Angle View EVAL-AD9951 Evaluation Board  Bottom View EVAL-AD9951 Evaluation Board Top View

最新评论

需要发起讨论吗? 没有关于 AD9951的相关讨论?是否需要发起讨论?

在EngineerZone®上发起讨论

近期浏览