ADL5360:  Dual 900 MHz Balanced Mixer with Low Side LO Buffer, IF Amp, and RF Balun

The ADL5360 utilizes two highly linear doubly balanced passive mixer cores along with integrated RF and LO balancing circuitry to enable single-ended operation. The ADL5360 incorporates two RF baluns ...More

ADL5360:  Dual 900 MHz Balanced Mixer with Low Side LO Buffer, IF Amp, and RF Balun

Product Description

The ADL5360 utilizes two highly linear doubly balanced passive mixer cores along with integrated RF and LO balancing circuitry to enable single-ended operation. The ADL5360 incorporates two RF baluns allowing for optimal main and diversity mixer performance over a 700 to 1000 MHz RF input frequency range using low-side LO injection. The balanced passive mixer arrangement provides good LO to RF leakage, typically better than -25 dBm, and excellent intermodulation performance. The balanced mixer cores also provide extremely high input linearity allowing the device to be used in demanding cellular applications where in-band blocking signals may otherwise result in the degradation of dynamic performance. High linearity IF buffer amps follow the passive mixer cores, to yield a typical power conversion gain of 9.5 dB. (For a higher IIP3 version of the dual mixer without the IF amplifiers, please contact the factory).

The ADL5360 provides two switched LO paths that can be utilized in TDD applications where it is desirable to rapidly alternate between two local oscillators. LO current can be externally set using a resistor to minimize dc current commensurate with the desired level of performance. An additional 3V logic pin is provided to power down (<100µA) the circuit when desired.

For low voltage applications, the ADL5360 is capable of operation at voltages down to 3V with substantially reduced dc current.

The ADL5360 is fabricated using a BiCMOS high performance IC process. The device is available in a 6 mm × 6 mm 36-lead LFCSP package and operates over a −40°C to +85°C temperature range. An evaluation board is also available.

Applications

  • Cellular Base Station Receivers
  • Main and Diversity Receiver Designs
  • Radio Link Downconverters

    • Data Sheet, Rev PrA, 10/2008

    Features

    • RF frequency 700 MHz to 1000 MHz
    • IF frequency 50 MHZ to 350 MHz
    • Power conversion gain of 8.5 dB
    • SSB noise figure of 9.5 dB
    • SSB NF with +10 dBm blocker of 16.5 dB
    • Input IP3 of 26 dBm
    • Input P1dB of 10 dBm
    • Typical LO drive of 0 dBm
    • Single-ended, 50Ω RF and LO input ports
    • High isolation SPDT LO input switch
    • Single supply operation: 3.3 to 5 V
    • Exposed paddle 6 mm × 6 mm, 36-lead LFCSP package

    Specifications

    RF Frequency (MHZ) 700 to 1000
    IF Frequency (MHz) 40 to 450
    LO Frequency (MHz) 250 to 960
    LO Drive (dBm) 0
    Conversion Gain (dB) 8.5
    IP3 (dBm) 26
    P1dB (dBm) 10
    Voltage Supply (V) +5V
    Package 36-Lead LFCSP

    Explore Other Products

    ADL5360 - Dual 900 MHz Balanced Mixer with Low Side LO Buffer, IF Amp, and RF Balun

    Subscribe to New Products Feed
    Part# RF Frequency (MHZ) IF Frequency (MHz) LO Frequency (MHz) LO Drive (dBm) Conversion Gain (dB) IP3 (dBm) P1dB (dBm) NF (dB) Pos Supply Supply Current (max) Price* (1000-4999)
    AD831 400 200 400 0 0 24 10 14 +9V to +11V 100 $6.83
    AD8342 LF to 2400 LF to 2400 LF to 2400 0 3 24 8.5 12 +4.75V to +5.25V 97 $3.59
    AD8343 dc to 2500 dc to 2500 dc to 2500 -10 7 16.5 2.8 14 +4.5V to +5.5V 50 $3.67
    AD8344 400 to 1200 70 to 400 470 to 1600 0 4.5 24 8.5 10 +4.75V to +5.25V 84 $3.59
    ADL5350 LF to 4000 LF to 4000 LF to 4000 +4 - 25 19 6.5 +2.7V to +3.5V 19 $2.39
    ADL5356 1700 to 2200 50 to 450 1400 to 2100 - 8 26 11 10 +3.3V to +5V - -
    ADL5358 700 to 1000 50 to 350 750 to 1450 - 8.5 26 10 9.5 +3.3V to +5V - -
    ADL5360 700 to 1000 40 to 450 250 to 960 0 8.5 26 10 9.5 +3.3V to +5V - -
    ADL5390 20 to 2400 230 20 to 2400 - 3.5 25 13 21 +4.75V to +5.25V 130 $7.59
    ADL5391 dc to 2000 - - - 1 14 13.2 - +4.5V to +5.5V 135 $4.95
    ADL5802 100 to 6000 LF to 600 100 to 6000 0 1.5 27 12 11 +3.3V to +5V - -

    * The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
    ** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

    Pricing, Packaging & Availability

    Help

    Model
    The model number is a specific version of a generic that can be purchased or sampled.

    Status
    Status indicates the current lifecycle of the product. This can be one of 4 stages:
    • Pre-Release: The model has not been released to general production, but samples may be available.
    • Production: The model is currently being produced, and generally available for purchase and sampling.
    • Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
    • Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).
    Package Description
    The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

    For detailed drawings and chemical composition please consult our  Package Site

    Pin Count
    Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

    Temperature Range
    This is the acceptable operating range of the device. The various ranges specified are as follows:
    • Commercial: 0 to +70 degrees Celsius
    • Military : -55 to +125 degrees Celsius
    • Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
    • Automotive: -40 to +125 degrees Celsius
    Price
    The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

    Production Availability
    This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.
    Sample availability may be better than production availability. Please enter samples into your cart to check sample availability.

    RoHS Compliant
    Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.

    *The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
    **Sample availability may be better than production availability. Please enter samples iinto your cart to check sample availability.

    View Sales and Distribution Offices