-
Products
- Amplifiers and Comparators
- Analog Microcontrollers
- Analog to Digital Converters
- Audio/Video Products
- Broadband Products
- Clock and Timing
- Digital to Analog Converters
- Embedded Processing and DSP
- Fiber/Optic
- Interface
- MEMS
- Power Management
- References
- RF/IF Components
- Sensors
- Switches/Multiplexers
- Temperature Sensing and Thermal Management
- Other Products
- Analog/HDMI/DVI Interfaces
- Audio A/D Converters
- Audio Amplifiers
- Audio CODECs
- Audio D/A Converters
- Audio Signal Processors
- Camera/Camcorder Analog Front Ends
- Display Driver Electronics
- iMEMS® Microphone
- Lens Driver Components
- Mobile TV Tuners
- Sample Rate Converters
- Video Amps/Buffers/Filters
- Video CODECs
- Video Compression
- Video Decoders
- Video Encoders
OTHERS WAYS
TO FIND PRODUCTSSelection Guides Product Selection Tables - Resources & Tools
-
About ADI
- My Analog
NEW PRODUCTS
-
ADA4004-2- 1.8nV/√Hz, 36 V Precision Dual Amplifier
The ADA4004-1/ADA4004-2/ADA4004-4 are 1.8 nV/√Hz precision amplifiers featuring 40 μV offset, 0.7 μV/°C drift, 12 MHz bandwidth, and low 1.7 mA per amplifier supply current.
The ADA4004-1/ADA4004-2/ADA4004-4 are designed on the high performance iPolar™ process, enabling improvements such as reduced noise and power consumption, increased speed and stability, and smaller footprint size. More
Data Sheet Rev E, 11/2009 (pdf 364kB)
-
ADA4692-4- Quad, Low Power, 3.6 MHz, Low Noise, Rail-to-Rail Output, Operational Amplifier
The ADA4692-4 is a quad, rail-to-rail output, single-supply amplifier featuring low power, wide bandwidth, and low noise. These amplifiers are ideal for a wide variety of applications. Audio preamps, filters, IR/photodiode amplifiers, charge amps, and high impedance sensors all benefit from this combination of performance and features.
Applications for these amplifiers include consumer More
Data Sheet Rev B, 09/2009 (pdf 548kB) -
ADA4051-2- 1.8V, μPower, Zero-Drift, Rail-to-Rail I/O Amplifier
The ADA4051-2 is a CMOS, micropower, zero-drift operational amplifier utilizing an innovative chopping technique. This amplifier features rail-to-rail input and output swing and extremely low offset voltage while operating from a 1.8 V to 5.5 V power supply. This amplifier also offers high PSRR and CMRR, while operating with a supply current of only 13 μA per amplifier. This combination of More
Data Sheet Rev A, 10/2009 (pdf 581kB)
-
AD8622- Dual, Low Power, Low Noise, Low Bias Current, Precision Rail-to-Rail Output Op Amp
The AD8622 is a dual, precision rail-to-rail output operational amplifier with a low supply current of only 350 μA maximum over temperature and supply voltages. It also offers ultralow offset, drift, and voltage noise combined with very low input bias current over the full operating temperature range.
With typical offset voltage of only 10 μV, offset drift of 0.5 μV/°C, and noise of only More
Data Sheet Rev 0, 07/2009 (pdf 97kB)
- More... Subscribe to New Products Feed
