Features and Benefits

  • High performance
    • True differential analog input voltage range: ±VREF
      • 0 V to VREF with VREF between 2.4 V and 5.1 V
    • Throughput: 500 kSPS/100 kSPS options
      • Zero latency architecture
    • 18-bit resolution with no missing codes
    • INL: ±1 LSB typical, ±2 LSB maximum
    • Dynamic range: 99 dB at VREF = 5 V
    • SNR: 98 dB at fIN = 1 kHz, VREF = 5 V
    • THD: −119 dB at fIN = 1 kHz, VREF = 5 V
    • SINAD: 97 dB at fIN = 1 kHz, VREF = 5 V
  • Low power dissipation
    • Single-supply 2.5 V operation with 1.8 V, 2.5 V, 3 V, and 5 V logic interface
    • 2 mW at 500 kSPS (VDD only)
      3.5 mW at 500 kSPS (total)
    • 70 μW at 10 kSPS
  • Proprietary serial interface SPI-/QSPI™-/MICROWIRE™-/DSP-compatible
  • 10-lead MSOP and 3 mm × 3 mm 10-Lead LFCSP
  • Wide operating temperature range: −40°C to +85°C

Product Details

The AD7989-1/AD7989-5 are 18-bit, successive approximation, analog-to-digital converters (ADCs) that operate from a single power supply, VDD. The AD7989-1/AD7989-5 contain a low power, high speed, 18-bit sampling ADC and a versatile serial interface port. On the CNV rising edge, the AD7989-1/AD7989-5 sample the voltage difference between the IN+ and IN− pins. The voltages on these pins typically swing in opposite phases between 0 V and VREF. The reference voltage, VREF, is applied externally and can be set independent of the supply voltage, VDD. Its power scales linearly with throughput.

The AD7989-1/AD7989-5 are serial peripheral interface (SPI)-compatible, which features the ability, using the SDI/CS input, to daisy-chain several ADCs on a single 3-wire bus. The AD7989-1/AD7989-5 are compatible with 1.8 V, 2.5 V, 3 V, and 5 V logic, using the separate VIO supply.

The AD7989-1/AD7989-5 are available in a 10-lead MSOP or a 10-lead LFCSP with operation specified from −40°C to +85°C.


  • Automated test equipment
  • Data acquisition systems
  • Medical instruments
  • Machine automation

Product Lifecycle icon-recommended Recommended for New Designs

This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.

Evaluation Kits (1)

Documentation & Resources

  • View All (18)
  • Data Sheets (1)
  • Application Notes (3)
  • User Guides (2)
  • Tutorials (4)
  • Product Selection Guide (1)
  • Circuit Note (2)
  • Technical Articles (4)
  • Press Releases (1)
  • Product Recommendations

    AD7989-5 Companion Parts

    Recommended Digital Isolators

    • For SPI Interface, lowest power, 2.5 kVrms isolation: ADUM1401.
    • For SPI Interface, low power, 5.0 kVrms isolation: ADUM4401.
    • For SPI Interface, enhanced system-level ESD performance, 2.5 kVrms isolation: ADUM3401.
    • For SPI Interface, smallest package, low voltage I/O (1.8 V to 5.5 V): ADUM3481.

    Recommended External Voltage References

    • For low drift, low noise, low power: ADR4550.
    • For low drift, low noise and high current output applications: ADR435.
    • For low drift, low noise and low dropout: ADR445.
    • For driving the voltage reference input: AD8031, AD8655.

    Recommended Driver Amplifiers

    Design Resources

    ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

    PCN-PDN Information

    Sample & Buy

    See our Ordering FAQs for answers to questions about online orders, payment options and more.


    The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

    Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.

    Price Table Help


    Evaluation Boards

    Pricing displayed is based on 1-piece.

    Up to two boards can be purchased through Analog.com. To order more than two, please purchase through one of our listed distributors.

    Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.