-
1209: 50mA、频率可选的开关电容电压变换器 Data Sheet (Rev. 3)1/1/1900PDF168K
概览
优势和特点
- 8-Pin, 1.11mm High µMAX Package
- Invert or Double the Input Supply Voltage
- Three Selectable Switching Frequencies
- High Frequency Reduces Capacitor Size
- 87% Efficiency at 50mA
- 200µA Quiescent Current (MAX860)
- 1µA Shutdown Supply Current
- 600mV Voltage Drop at 50mA Load
- 12Ω Output Resistance
产品详情
The MAX860/MAX861 charge-pump voltage converters invert input voltages ranging from +1.5V to +5.5V, or double input voltages ranging from +2.5V to +5.5V. Because of their high switching frequencies, these devices use only two small, low-cost capacitors. Their 50mA output makes switching regulators unnecessary, eliminating inductors and their associated cost, size, and EMI. Greater than 90% efficiency over most of the load-current range, combined with a typical operating current of only 200µA (MAX860), provides ideal performance for both battery-powered and board-level voltage-conversion applications.
A frequency-control (FC) pin provides three switching-frequencies to optimize capacitor size and quiescent current and to prevent interference with sensitive circuitry. Each device has a unique set of three available frequencies. A shutdown (active-low SHDN) pin reduces current consumption to less than 1µA. The MAX860/MAX861 are suitable for use in applications where the ICL7660 and MAX660's switching frequencies are too low. The MAX860/MAX861 are available in 8-pin µMAX® and SO packages.
应用
- 手持式仪表(PDA、掌上电脑)
- 接口供电
- 医疗仪器
- 运算放大器电源
- 便携式计算机
产品分类
产品生命周期
量产
该产品系列中至少有一个型号已量产并可供采购。该产品适合用于新设计，但也可能有更新的替代产品。
参考资料
-
MAX861 Reliability Data1/12/2023PDF97K
-
单电源运算放大器的设计考虑5/29/2006
-
Guide to Integrated Charge Pump DC-DC Conversion11/29/2001
设计资源
ADI始终把满足您可靠性水平的产品放在首要位置。我们通过在所有产品、工艺设计和制造过程中引入高质量和可靠性检查实践这一承诺。发运的产品实现“零缺陷”始终是我们的目标。
PCN-PDN信息
样片申请及购买
订购常见问题解答
有关在线订单、付款选项等问题的答案，请参阅我们的订购常见问题解答。
立即购买报价
(**)显示的立即购买报价和报价范围基于少量订单。
报价单
(*)所列的千片报价单仅供预算参考，指美元报价（规定订量的单价，美国离岸价），如有修改，恕不另行通知。由于地区关税、商业税、汇率及手续费原因，国际报价可能不同。对于指定订量报价或交货报价，请联系当地的ADI授权代理商。对于评估板和套件的报价是指单片价格。
交付周期
请参见我们的首席客户官关于交付周期的最新沟通说明。
采样
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后，所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站，请创建一个新帐户。有关此样片网站的任何问题，请联系SampleSupport@analog.com。