DS21Q348

3.3V、E1/T1/J1线路接口

Viewing:

产品详情

Complete E1, T1, or J1 line interface unit (LIU)
Supports both long-haul and short-haul trunks
Internal software-selectable receive-side termination for 75Ω/100Ω/120Ω
3.3V power supply
32-bit or 128-bit crystal-less jitter attenuator requires only a 2.048MHz master clock for both E1 and T1 with option to use 1.544MHz for T1
Generates the appropriate line build-outs, with and without return loss, for E1 and DSX-1 and CSU line build-outs for T1
AMI, HDB3, and B8ZS, encoding/decoding
16.384MHz, 8.192MHz, 4.096MHz, or 2.048MHz clock output synthesized to recovered clock
Programmable monitor mode for receiver
Loopbacks and PRBS pattern generation/detection with output for received errors
Generates/detects in-band loop codes, 1 to 16 bits including CSU loop codes
8-bit parallel or serial interface with optional hardware mode
Muxed and nonmuxed parallel bus supports Intel or Motorola
Detects/generates blue (AIS) alarms
NRZ/bipolar interface for TX/RX data I/O
Transmit open-circuit detection
Receive carrier loss (RCL) indication (G.775)
High-Z state for TTIP and TRING
50mA (rms) current limiter

这是最新版本的数据手册

3.3V、E1/T1/J1线路接口开发板子卡

DS21Q348设计套件是DS21Q348 3.3V E1/T1/J1线路接口的评估板。DS21Q348DK被设计作为DK2000或DK101母板的子卡使用。完整的子卡电路板上包括线路接口单元(LIU)、变压器、端接电阻、配置开关、网络连接器，以及与母板的接口。