ltc4075hvx

量产

High Voltage Dual Input Li-Ion/Polymer Battery Charger

数据手册 产品选型表
产品技术资料帮助

ADI公司所提供的资料均视为准确、可靠。但本公司不为用户在应用过程中侵犯任何专利权或第三方权利承担任何责任。技术指标的修改不再另行通知。本公司既没有含蓄的允许，也不允许借用ADI公司的专利或专利权的名义。本文出现的商标和注册商标所有权分别属于相应的公司。
Viewing:

概述

  • 22V Maximum Voltage for Wall Adapter and USB Inputs
  • Charge Single-Cell Li-Ion Batteries from Wall Adapter and USB Inputs
  • Automatic Input Power Detection and Selection
  • Charge Current Programmable up to 950mA from Wall Adapter Input
  • Overvoltage Lockout for Wall Adapter and USB Inputs
  • No External MOSFET, Sense Resistor or Blocking Diode Needed
  • Thermal Regulation Maximizes Charge Rate Without Risk of Overheating*
  • Preset Charge Voltage with ±0.35% Accuracy
  • Programmable Charge Current Termination
  • 40µA USB Suspend Current in Shutdown
  • Independent “Power Present” Status Outputs
  • Charge Status Output
  • Automatic Recharge
  • Available in a Thermally Enhanced, Low Profile (0.75mm) 10-Lead (3mm × 3mm) DFN Package

The LTC4075HVX is a standalone linear charger that is capable of charging a single-cell Li-Ion/Polymer battery from both wall adapter and USB inputs. The charger can detect power at the inputs and automatically select the appropriate power source for charging.

No external sense resistor or blocking diode is required for charging due to the internal MOSFET architecture. The LTC4075HVX features a maximum 22V rating for both wall adapter and USB inputs although charging stops if the selected power source exceeds the overvoltage limit. Internal thermal feedback regulates the battery charge current to maintain a constant die temperature during high power operation or high ambient temperature conditions. The float voltage is fixed at 4.2V and the charge current is programmed with an external resistor. The LTC4075HVX terminates the charge cycle when the charge current drops below the programmed termination threshold after the final float voltage is reached.

Other features include automatic recharge, undervoltage lockout, charge status outputs, and “power present” status outputs to indicate the presence of wall adapter or USB power. No trickle charge allows full current from the charger when a load is connected directly to the battery.

Trickle Charge Vin Abs Max
LTC4075 Yes 10V
LTC4075X No 10V
LTC4075HVX No 22V

Applications

  • Cellular Telephones
  • Handheld Computers
  • Portable MP3 Players
  • Digital Cameras
ltc4075hvx
High Voltage Dual Input Li-Ion/Polymer Battery Charger
Dual Input Battery Charger for Single-Cell Li-Ion Charge Current vs Supply Voltage Product Package 1
添加至 myAnalog

将产品添加到myAnalog 的现有项目或新项目中（接收通知）。

创建新项目
提问

参考资料

数据手册 1

可靠性数据 1

应用笔记 1

了解更多
添加至 myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

创建新项目

软件资源

找不到您所需的软件或驱动?

申请驱动/软件

最新评论

需要发起讨论吗？ 没有关于 LTC4075HVX的相关讨论？是否需要发起讨论？

在EngineerZone®上发起讨论

近期浏览