ADP196

RECOMMENDED FOR NEW DESIGNS

5 V, 3 A Logic Controlled High-Side Power Switch

Data Sheet (Rev. 0) Product Selection Table

Part Models: 4
1ku List Price: Starting From $0.59

Viewing:

Overview

Low RDSON: 10 mΩ (WLCSP) or 27 mΩ (LFCSP)
Wide input voltage range: 1.8 V to 5.5 V
Quick output discharge (QOD) circuit (ADP196-01)
3 A continuous operating current at 70°C
1.2 V logic compatible enable input
Low 25 μA quiescent current, V_IN 1.8 V

Low 40 μA quiescent current, V_IN = 5.5 V
Overtemperature and overcurrent protection
Ultralow shutdown current: <1 μA
Ultrasmall 1.0 mm × 1.5 mm, 0.5 mm pitch, 6-ball WLCSP
Tiny 2.0 mm × 2.0 mm × 0.55 mm, 0.65 mm pitch, 6-lead LFCSP

The ADP196 is a high-side load switch designed for operation from 1.8 V to 5.5 V. This load switch provides power domain isolation, helping to extend battery operation. The device contains a low on-resistance, N-channel MOSFET that supports more than 3 A of continuous current and minimizes power loss. In addition, RDS_ON is constant, independent of the VIN voltage. The low 25 μA quiescent current and ultralow shutdown current make the ADP196 ideal for battery-powered portable equipment. The built-in level shifter for enable logic makes the ADP196 compatible with many processors and GPIO controllers.

Overtemperature protection circuitry is activated if the junction temperature exceeds 125°C, thereby protecting the ADP196 and downstream circuits from potential damage. Overcurrent pro- tection is provided in the form of constant current limiting.

The ADP196-01 incorporates an internal quick output discharge circuit to discharge the output capacitance when the ADP196-01 output is disabled.

The ADP196 in the WLCSP package occupies minimal printed circuit board (PCB) area with a footprint of less than 1.5 mm² and a height of 0.60 mm.

The ADP196 is available in an ultrasmall, 1.0 mm × 1.5 mm, 0.5 mm pitch, 6-ball WLCSP and a 2.0 mm × 2.0 mm × 0.55 mm, 0.65 mm pitch, 6-lead LFCSP.

APPLICATIONS

Mobile phones
Digital cameras and audio devices
Portable and battery-powered equipment
In-Rush Control of Optical Network Modules
SFP, SFP+, XFP, CFP

Part Models: 4
1ku List Price: Starting From $0.59

Documentation

Data Sheet 1

ADP196: 5V, 3A Logic Controlled High-Side Power Switch Data Sheet (Rev.0) 04/08/2013

User Guide 3

UG-414: Evaluating the ADP196 High-Side Load Switch (Rev.0) 03/16/2021

UG-414: Evaluating the ADP196 High-Side Load Switch 02/14/2015

User Guide: ADMX1002, Ultra-low Distortion and Low Noise Signal Generator 04/16/2021

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.

Part Model	Pin/Package Drawing	Documentation	CAD Symbols, Footprints, and 3D Models
ADP196ACBZ-01-R7	6-Ball WLCSP (1mm x 1.5mm)	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
ADP196ACBZ-R7	6-Ball WLCSP (1mm x 1.5mm)	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
ADP196ACPZN-01-R7	6-Lead LFCSP (2mm x 2mm w/ EP)	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
ADP196ACPZN-R7	6-Lead LFCSP (2mm x 2mm w/ EP)	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys

Part Models	Product Lifecycle	PCN

Apr 15, 2014 - 14_0080 ADP196 Die Revision
		PCN14_0080_Form Material_Report Qualification Plan Summary
ADP196ACBZ-01-R7	PRODUCTION
ADP196ACBZ-R7	PRODUCTION
ADP196ACPZN-01-R7	PRODUCTION
ADP196ACPZN-R7	PRODUCTION
Aug 8, 2022 - 22_0192 Qualification of an Alternate Adhesive Material and Molding Compound for Select LFCSP Packages
		PCN22_0192_Form Material_Report Detailed Change Description Qualification Results Summary
ADP196ACPZN-01-R7	PRODUCTION
ADP196ACPZN-R7	PRODUCTION
Oct 18, 2016 - 16_0036 Assembly Relocation to Stats ChipPAC Jiangyin and Test Transfer to Stats ChipPAC Singapore of Select LFCSP Products
		PCN16_0036_Form Material_Report Qualification Results Summary Qualification Results Summary Qualification Results Summary Test Correlation Report
ADP196ACPZN-01-R7	PRODUCTION
ADP196ACPZN-R7	PRODUCTION
Aug 6, 2014 - 13_0244 Assembly and Test Transfer of Select 2x2 and 1.6x1.6 mm Mini-LFCSP Products to STATS ChipPAC China
		PCN13_0244_Form Material_Report Detailed Change Description Qualification Results Summary Test Correlation Report
ADP196ACPZN-01-R7	PRODUCTION
ADP196ACPZN-R7	PRODUCTION

This is the most up-to-date revision of the Data Sheet.

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Evaluation Kits

Ultra-low Distortion Signal Generator Measurement Module

Buy Now View Details

Features and Benefits

Ultra-low distortion, high-resolution source
- DC, 50Hz to 40kHz Frequency Range
- Proprietary digital pre-distortion (DPD) algorithm
- –130dBc THD @ 1kHz (typ.)
- Arbitrary waveform generation (AWG) with on-board pattern memory
- Differential (balanced) output up to 3.6VRMS
Fast pattern switching between multiple stored waveforms
Small form-factor (60mm x 40mm)
Low power, 1W typ. (quiescent)
SPI interface for integration into test and measurement systems

Product Details

The ADMX1002 is an ultra-low distortion sinewave and high-resolution arbitrary waveform generator. This high-performance module demonstrates a proprietary digital pre-distortion algorithm that reduces signal distortion below levels that can be achieved with high-performance digital-to-analog converters (DAC) and amplifiers alone. Its differential output can be set to common-mode levels often required to test high-performance analog-to-digital converters (ADC), audio codecs, and other audio ICs and systems. With an easy-to-use SPI interface and small-form factor, the ADMX1002 can be easily embedded into test systems, or simply used on the bench for measurement and characterization.

APPLICATIONS

High-end audio test
Analog-to-digital converter characterization and test
Sensor and transducer test
Frequency response and network analysis
ATE

Resources

User Guide: ADMX1002, Ultra-low Distortion and Low Noise Signal Generator
4/16/2021

Software

ADMX100X Graphical User Interface (GUI)
9.35 M

ADP196 Evaluation Board

Buy Now View Details

Features and Benefits

Low RDS_ON: 27 mΩ (LFCSP)
Wide input voltage range: 1.8 V to 5.5 V
Quick output discharge (QOD) circuit option (ADP196ACPZN-01-R7)
3 A continuous operating current to 70°C
Tiny, 2.0 mm × 2.0 mm × 0.55 mm, 0.65 mm pitch, 6-lead LFCSP
Operating temperature range: TJ = −40°C to +85°C

Product Details

The ADP196 evaluation board, ADP196CP-EVALZ, is used to demonstrate the functionality of the ADP196 high-side load switch.

Simple device measurements such as V_IN to V_OUT resistance (RDS_ON), ground current, and off-state current can be demonstrated with only a single voltage source, a voltage meter, a current meter, and a load resistor.

Complete information about the ADP196 high-side load switch is available in the ADP196 data sheet, which should be consulted when using the ADP196CP-EVALZ.

Resources

UG-414: Evaluating the ADP196 High-Side Load Switch (Rev.0)
3/16/2021

Ultra-low Distortion Signal Generator Measurement Module with Fully Differential Input Acquisition Channel

Buy Now View Details

Features and Benefits

Ultra-low distortion, high-resolution source
- DC, 50Hz to 40kHz Frequency Range
- Proprietary digital pre-distortion (DPD) algorithm
- –130dBc THD @ 1kHz (typ.)
- Arbitrary waveform generation (AWG) with on-board pattern memory
- Differential (balanced) output up to 3.5VRMS
- Fast pattern switching between multiple stored waveforms
Fully Differential input Acquisition Channel
Small form-factor (60mm x 40mm)
Low power, 1W typ. (quiescent)
SPI interface for integration into test and measurement systems

Product Details

The ADMX1001 is an ultra-low distortion sinewave and high-resolution arbitrary waveform generator with an acquisition channel. This high-performance module demonstrates a proprietary digital pre-distortion algorithm that reduces signal distortion below levels that can be achieved with high-performance digital-to-analog converters (DAC) and amplifiers alone. Its differential output can be set to common-mode levels often required to test high-performance analog-to-digital converters (ADC), audio codecs, and other audio ICs and systems. The signal generator and the acquisition channel can be individually controlled using separate, easy to use, SPI interfaces - combined with the module's small-form factor, the ADMX1001 can be easily embedded into test systems, or simply used on the bench for measurement and characterization.

APPLICATIONS