The ADM811/ADM812 are reliable voltage monitoring devices suitable for use in most voltage monitoring applications. The ADM811/ADM812 are designed to monitor six different voltages, each allowing a 5% or 10% degradation of standard PSU voltages before a reset occurs. These voltages have been selected for the effective monitoring of 2.5 V, 3 V, 3.3 V, and 5 V supply voltage levels.
Included in this circuit is a debounced manual reset input. Reset can be activated using an electrical switch (or an input from another digital device) or by a degradation of the supply voltage. The manual reset function is very useful, especially if the circuit in which the ADM811/ADM812 are operating enters into a state that can only be detected by the user. Allowing the user to reset a system manually can reduce the damage or danger that could otherwise be caused by an out-of-control or locked system.
Data Sheet, Rev. F, 8/09
|ADM811/ADM812: Microprocessor Supervisory Circuit in 4-Lead SOT-143 with DSP Data Sheet (Rev G, 03/2013) (pdf, 240 kB)||产品数据手册|
|Supervisory Devices Complementary Parts Guide for Altera FPGAs (pdf, 664 kB)||产品选型指南|
|Supervisory Devices Complementary Parts Guide for Xilinx FPGAs (pdf, 661 kB)||产品选型指南|
|Supervisory Devices Complementary Parts Guide for Altera FPGAs (pdf, 664 kB)||解决方案通报|
|Supervisory Devices Complementary Parts Guide for Xilinx FPGAs (pdf, 661 kB)||解决方案通报|
|Voltage Monitoring Products Applications Guide (pdf, 1808 kB)||解决方案通报|
|Voltage Monitoring and Sequencing (2009/2010) (pdf)||概况|
|Voltage Monitoring Products 2008 (pdf, 3930 kB)||概况|
|Power System Management (Spring 2007) (pdf, 1170 kB)||概况|
Supervisor Parametric Search
Narrow down the thousands of available supervisors using parameters applicable to your application.
|ADIsim Design/Simulation Tools||HTML|
原理图符号和PCB封装— Analog Devices offers Symbols & Footprints which are compatible with a large set of today’s CAD systems for broader and easier support.