The AD9649 is a monolithic, single channel 1.8 V supply, 14-bit, 20/40/65/80 MSPS analog-to-digital converter (ADC). It features a high performance sample-and-hold circuit and an on-chip volt-age reference.
The product uses multistage differential pipeline architecture with output error correction logic to provide 14-bit accuracy at 80 MSPS data rates and to guarantee no missing codes over the full operating temperature range.
The ADC contains several features designed to maximize flexibility and minimize system cost, such as programmable clock and data alignment and programmable digital test pattern generation. The available digital test patterns include built-in deterministic and pseudorandom patterns, along with custom user-defined test patterns entered via the serial port interface (SPI).
A differential clock input with optional 1, 2, or 4 divide ratios controls all internal conversion cycles.
The digital output data is presented in offset binary, gray code, or twos complement format. A data output clock (DCO) is provided to ensure proper latch timing with receiving logic. Both 1.8 V and 3.3 V CMOS levels are supported.
The AD9649 is available in a 32-lead RoHS-compliant LFCSP and is specified over the industrial temperature range (−40°C to +85°C).Applications
|Title||Content Type||File Type|
|AD9649: 14-Bit, 20/40/65/80 MSPS, 1.8 V Analog-to-Digital Converter (Rev 0, 10/2009) (pdf, 1497 kB)||Data Sheets|
|AN-1142: Techniques for High Speed ADC PCB Layout (pdf, 392 kB)||Application Notes|
|AN-878: High Speed ADC SPI Control Software (pdf, 585 kB)||Application Notes|
|AN-807: Multicarrier WCDMA Feasibility (pdf, 969 kB)||Application Notes|
AN-808: Multicarrier CDMA2000 Feasibility
(pdf, 1535 kB)
The goal of this application note is to determine the feasibility of implementing a multicarrier CDMA2000 transceiver and what the major subsystem performances must be.
|AN-827: A Resonant Approach to Interfacing Amplifiers to Switched-Capacitor ADCs (pdf, 203 kB)||Application Notes|
|AN-877: Interfacing to High Speed ADCs via SPI (pdf, 1594 kB)||Application Notes|
|AN-935: Designing an ADC Transformer-Coupled Front End (pdf, 363 kB)||Application Notes|
AN-586: LVDS Outputs for High Speed A/D Converters
(pdf, 207 kB)
High Speed ADCs Uses LVDS (Low-Voltage Differential Signaling) to Minimize Performance Limitations In ADC Applications When Providing High Speed Data Output
AN-812: MicroController-Based Serial Port Interface (SPI) Boot Circuit (pdf, 452,449 bytes)
(pdf, 441 kB)
This application note describes the operation of a general-purpose, microcontroller-based Serial Port Interface (SPI) boot circuit.
|AN-742: Frequency Domain Response of Switched-Capacitor ADCs (pdf, 401 kB)||Application Notes|
|AN-741: Little Known Characteristics of Phase Noise (pdf, 1679 kB)||Application Notes|
|Evaluating the AD9266/AD9649/AD9629/AD9609 Analog-to-Digital Converters||User Guides||HTML|
|MS-2210: Designing Power Supplies for High Speed ADC (pdf, 327 kB)||Technical Articles|
Improve The Design Of Your Passive Wideband ADC Front-End Network
As converter technology improves, so does the demand to resolve very high intermediate frequencies (IFs) accurately at high speeds. This poses two challenges: the converter design itself and the front-end design that couples the signal content to the converter. Even if the converter itself is excellent, the front end must be able to preserve the signal quality too.
(Electronic Design, 3/26/2010)
|Analog-to-Digital Converter and Drivers ICs Solutions Bulletin, Volume 10, Issue 2 (pdf, 1358 kB)||Solutions Bulletins|
|RAQs index||Rarely Asked Questions||HTML|
|Glossary of EE Terms||Glossary||HTML|
|Title||Content Type||File Type|
ADIsimADC is Analog Devices' Analog-to-Digital Behavioral Model that accurately models the typical performance characteristics of many of our High Speed Converters. The model faithfully reproduces the errors associated with both static and dynamic features such as AC linearity, clock jitter, and many other product specific anomalies.
|ADIsim Design/Simulation Tools||HTML|
|AD9649 IBIS Models||IBIS Models||HTML|
|FMC Interposer & Xilinx KC705 Reference Design (Wiki Site)||Device Drivers||HTML|
Recommended Driver Amplifiers for the AD9649Recommended VGA's for the AD9649
Were these recommendations helpful?
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.