製品概要
機能と利点
- 42mm × 24mm PCBA module with on-board chip antenna
- Integrates 2.4 GHz, IEEE 802.15.4e System-on-Chip, Complete with Embedded SmartMesh Networking Software
- >99.999% Network Reliability in the Most Challenging RF Environments
- Sub 50µA Routing Nodes
- Serves as either a Wireless Mote, EManager, or Access Point Mote in a SmartMesh IP network
- These products contain encryption. Import/export restrictions may apply.
製品概要
SmartMesh IP wireless sensor networks are self managing, low power internet protocol (IP) networks built from wireless nodes called motes. The LTP5901-IPM is printed circuit board assembly (PCBA) product with on-board chip antenna in the Eterna® family of IEEE 802.15.4e solutions, featuring a highly integrated, low power radio design as well as an ARM Cortex-M3 32-bit microprocessor running SmartMesh IP embedded networking software. The LTP5901-IPM, at 24mm × 42mm, is built for surface-mount assembly.
With SmartMesh IP time-synchronized networks, all motes in the network may route, source or terminate data, while providing many years of battery powered operation. SmartMesh IP is a highly flexible network with proven reliability and low power performance in an easy-to-integrate platform.
The LTP5901-IPM’s behavior in a SmartMesh IP network is determined by the choice of SmartMesh IP network software loaded: Wireless Mote, EManager, or Access Point Mote in a SmartMesh IP network. The SmartMesh IP software provided with the LTP5901-IPM is fully tested and validated, and is readily configured via a software Application Programming Interface. Once you have purchased SmartMesh IP products, the SmartMesh IP stack binaries may be downloaded via your myAnalog account.
The pin signaling behavior of the LTP5901IPC-IPMA hardware is determined by the software loaded and is described in detail in the following product datasheets:
LTP5901-IPM |
= |
LTP5901IPC-IPMA hardware |
+ |
SmartMesh IP Mote Software |
→ |
|
LTP5901-IPR |
= |
LTP5901IPC-IPMA hardware |
+ |
SmartMesh IP EManager Software |
→ |
|
LTP5901-IPA |
= |
LTP5901IPC-IPMA hardware |
+ |
SmartMesh IP Access Point Software |
→ |
Network Features
Feature |
Benefit |
>99.999% Network Reliability |
Avoids communications dropouts common with other wireless networks |
NIST-certified AES-128 bit Encryption |
Data protected by end-to-end encryption, message integrity checking and device authentication |
Scalable |
Uses time-slotted channel-hopping protocol to avoid in-network collisions to maximize scale while minimizing power and latency-hungry transmission retries due to congestion |
Bidirectional Communications |
Ideal for both monitoring and control applications |
Up to 10 messages/second/node |
Time-slotted communications avoids contention. This data rate includes built-in margin for packet retries. |
Device Features
Feature |
Benefit |
Industry-Leading Low Power Radio Technology |
• 4.5mA to Receive a Packet |
Pre-engineered RF |
RF elements include an on-chip power amplifier and are pre-tuned for optimized performance, including temperature compensation, saving development time. |
RF Modular Certifications |
Pre-certified in USA, Canada, EU, Australia/New Zealand, India, Japan, Korea, Taiwan |
Energy Harvesting Support |
Very low power design enables motes to be powered by a wide variety of energy harvesters. Click here to see a demonstration circuit of a SmartMesh IP mote powered by indoor light. |
Integrated Temperature Sensor |
Precise temperature sensor is integrated directly into the mote. |
Applications
SmartMesh IP is ideally suited for wireless Industrial Internet of Things (IoT) applications. Learn more about SmartMesh applications.
製品ライフサイクル
製造中
この製品ファミリーの1つ以上の型番が生産/供給中です。新規の設計に適していますが、より新しい代替製品を提供している場合があります。
評価キット (3)
ドキュメント
データシート (5)
ユーザ・ガイド (19)
ツール
Software and Simulation
参考資料
品質関連資料 (1)
技術記事 (15)
設計リソース
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.
サポート & ディスカッション
サンプル&購入
価格は1個当たりの米ドルで、米国内における販売価格(FOB)で表示されておりますので、予算のためにのみご使用いただけます。 また、その価格は変更 されることがあります。米国以外のお客様への価格は、輸送費、各国の税金、手数料、為替レートにより決定されます。価格・納期等の詳細情報については、弊社正規販売代理店または担当営業にお問い合わせください。なお、 評価用ボードおよび評価用キットの表示価格は1個構成としての価格です。