The AD8339* is a quad I/Q demodulator configured to be driven by a low noise preamplifier with differential outputs. It is optimized for the LNA in the AD8332/AD8334/AD8335 family of VGAs. The part consists of four identical I/Q demodulators with a 4× local oscillator (LO) input that divides this signal and generates the necessary 0° and 90° phases of the internal LO that drive the mixers. The four I/Q demodulators can be used independently of each other (assuming that a common LO is acceptable) because each has a separate RF input.

Continuous wave (CW) analog beamforming (ABF) and I/Q demodulation are combined in a single 40-lead ultracompact chip scale device, making the AD8339 particularly applicable in high density ultrasound scanners. In an ABF system, time domain coherency is achieved following the appropriate phase alignment and summation of multiple receiver channels. A reset pin synchronizes multiple ICs to start each LO divider in the same quadrant. Sixteen programmable 22.5° phase increments are available for each channel. For example, if Channel 1 is used as a reference and Channel 2 has an I/Q phase lead of 45°, then the user can phase align Channel 2 with Channel 1 by choosing the correct code.

The mixer outputs are in current form for convenient summation. The independent I and Q mixer output currents are summed and converted to a voltage by a low noise, high dynamic range, current-to-voltage (I-V) transimpedance amplifier, such as the AD8021 or the AD829. Following the current summation, the combined signal is applied to a high resolution analog-to-digital converter (ADC), such as the AD7665 (16-bit, 570 kSPS).

An SPI-compatible serial interface port is provided to easily program the phase of each channel; the interface allows daisy chaining by shifting the data through each chip from SDI to SDO. The SPI also allows for power-down of each individual channel and the complete chip. During power-down, the serial interface remains active so that the device can be programmed again.

The dynamic range is typically 160 dB/Hz at the I and Q outputs. The AD8339 is available in a 6 mm × 6 mm, 40-lead LFCSP and is specified over the industrial temperature range of −40°C to +85°C.

Applications

Medical imaging (CW ultrasound beamforming)

Phased array systems

Radar

Adaptive antennas

Communication receivers

* Patent pending.

Data Sheet, Rev. 0, 8/07

Part#	Function	RF Freq (MHz)	IQ Freq (MHz)	Phase Error (deg)	Amplitude Error (dB)	VGA Range (dB)	Noise Floor (dBm/Hz)	Voltage Supply (V)	Supply Current (max)	Package	Price* (1000-4999)
AD630	Demod, Mod	dc to 2	-	-	-	-	-	+/- 15	5	20-Lead DIP	$6.25
AD8333	Demod	dc to 50	-	0.1	0.05	-	-161	+/- 5	44	32-Lead LFCSP	$9.06
AD8339	Demod	dc to 50	50	1	0.25	-	-	4.5 to 5.5	35	40-Lead LFCSP	$12.09
AD8340	Vector Mod	700 to 1000	-	-	-	-	-	5	130	24-Lead LFCSP	$7.59
AD8341	Vector Mod	1500 to 2400	-	-	-	-	-150.5	4.75 to 5.25	125	24-Lead LFCSP	$7.59
AD8345	Mod	140 to 1000	80	0.5	0.2	-	-155	2.7 to 5.5	65	16-Lead Tssop	$5.02
AD8346	Mod	800 to 2500	70	1	0.2	-	-147	2.7 to 5.5	45	16-Lead Tssop	$4.45
AD8347	Demod	800 to 2700	65	1	0.3	69.5	-	2.7 to 5.5	64	28-Lead TSSOP	$5.85
AD8348	Demod	50 to 1000	75	0.5	0.25	45	-	2.7 to 5.5	58	28-Lead TSSOP	$5.01
AD8349	Mod	700 to 2700	160	0.3	0.1	-	-156	5	135	16-Lead Tssop	$5.02
ADL5370	Mod	250 to 1300	700	-	-	-	-156	4.75 to 5.5	210	24-Lead LFCSP	$5.04
ADL5371	Mod	700 to 1300	700	-	-	-	-156	4.75 to 5.5	175	24-Lead LFCSP	$5.04
ADL5372	Mod	1500 to 2500	700	-	-	-	-158	4.75 to 5.5	175	24-Lead LFCSP	$5.04
ADL5373	Mod	2300 to 3000	700	-	-	-	-156	4.75 to 5.5	175	24-Lead LFCSP	$5.04
ADL5374	Mod	2800 to 4000	700	-	-	-	-155	4.75 to 5.5	175	24-Lead LFCSP	$5.04
ADL5375	Mod	400 to 6000	500	-	-	-	-161	4.75 to 5.25	190	24-Lead LFCSP	$5.04
ADL5380	Demod	400 to 6000	-	-	-	-	-	-	-	-	-
ADL5382	Demod	700 to 2700	370	0.2	0.05	-	-	4.75 to 5.25	220	24-Lead LFCSP	$5.28
ADL5385	Mod	50 to 2200	500	0.33	0.03	-	-160	4.75 to 5.5	215	24-Lead LFCSP	$5.04
ADL5387	Demod	50 to 2000	240	0.4	0.1	-	-	4.75 to 5.25	180	24-Lead LFCSP	$5.28
ADL5390	Vector Mod	20 to 2400	230	-	-	-	-147	5	130	24-Lead LFCSP	$7.59
ADL5590	Mod	869 to 960	-	-	-	-	-157	4.75 to 5.25	170	36-Lead LFCSP	-
ADL5591	Mod	1805 to 1990	-	-	-	-	-157	4.75 to 5.25	170	36-Lead LFCSP	-

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

产品型号是指能够购买或者索取样片的某类产品的具体型号。

产品状态指该产品当前的生存周期。它指下面四个阶段之一：

• 预发布：该产品型号尚未投入正式生产，但是可以提供样片。
• 生产：该产品型号目前已在生产，可以购买和索取样片。
• 停产前限时购买：该型号已经计划停产，但仍然可以在限定的时间内购买。
• 停产：该型号产品已经停产，不再提供。本表格中列出的其它型号产品仍可以供货（如果这些型号不处于停产状态）。

这种集成电路（IC）的封装说明，例如：DIP，SOIC和BGA封装。评估板是一块用来演示器件性能的试验板，该器件也包含在该评估板上。

欲详细了解封装图和化学成份请访问：  封装网页

引脚数是指该器件的引脚、球状焊点或焊盘的数量。产品技术资料中提供引脚排列图和引脚功能描述。

这是指该器件允许的工作温度范围。以下为所规定的三种温度范围：

• 民用温度范围：0 ºC～＋70 ºC
• 军用温度范围：－55ºC ～＋125ºC
• 工业用温度范围：不同型号的产品的温度范围可能不同。欲了解更多信息，请查阅产品技术资料。
• 汽车工作温度范围：-40 ℃～ +125 ℃

这里所列出的美国报价单仅供预算参考，指美元报价（规定订量的每片美元，美国离岸价），如有修改不再另行通知。由于地区关税、商业税、汇率及手续费原因，国际报价可能不同。对于特殊批量报价，请与您当地的ADI公司办事处或代理商联络。对于评估板和套件的报价是指一个单位价格。

该日期为美国模拟器件公司的预期仓库发货时间。大多数定单将在该日期后48小时内运出。定单一经发出，美国模拟器件公司将发出确认邮件以确认交货日期 。在输入定单的页面，请务必留意计划到岸日。我们接受期货定单，但送货日期将按工厂计划延期而定。所定产品的仓储地也应留意。我们在美国、欧洲和东南亚均设有仓库。运货时间因仓库地址不同而有所差异。

ADI公司由于对应用环境的考虑，提供许多无铅（Pb）封装产品。欲获知更多关于无铅封装产品的信息，请访问我们的 Pb 无铅（Pb）封装产品网页。