The ADM2582E/ADM2587E are fully integrated signal and power isolated data transceivers with ±15 kV ESD protection and are suitable for high speed communication on multipoint transmission lines. The ADM2582E/ADM2587E include an integrated isolated dc-to-dc power supply, which eliminates the need for an external dc-to-dc isolation block.
They are designed for balanced transmission lines and comply with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E).
The devices integrate Analog Devices, Inc., iCoupler® technology to combine a 3-channel isolator, a three-state differential line driver, a differential input receiver, and Analog Devices isoPower dc-to-dc converter into a single package. The devices are powered by a single 5 V or 3.3 V supply, realizing a fully integrated signal and power isolated RS-485 solution.
The ADM2582E/ADM2587E driver has an active high enable. An active low receiver enable is also provided that causes the receiver output to enter a high impedance state when disabled.
The devices have current limiting and thermal shutdown features to protect against output short circuits and situations where bus contention may cause excessive power dissipation. The parts are fully specified over the industrial temperature range and are available in a highly integrated, 20-lead, wide-body SOIC package.
The ADM2582E/ADM2587E contain isoPower technology that uses high frequency switching elements to transfer power through the transformer. Special care must be taken during printed circuit board (PCB) layout to meet emissions standards. Refer to Application Note AN-0971, Control of Radiated Emissions with isoPower Devices, for details on board layout considerations.APPLICATIONS
|Title||Content Type||File Type|
|ADM2582E/ADM2587E: Signal and Power Isolated RS-485 Transceiver with ±15 kV ESD Protection Data Sheet (Rev C, 06/2011) (pdf, 405 kB)||Data Sheets|
|AN-1176: Component Footprints and Symbols in the Binary .Bxl File Format (pdf, 671 kB)||Application Notes|
|AN-960: RS-485/RS-422 Circuit Implementation Guide (pdf, 245 kB)||Application Notes|
|AN-0971: Recommendations for Control of Radiated Emissions with isoPower Devices (pdf, 406 kB)||Application Notes|
|ADM2582E: Signal and Power Isolated RS-485 Transceiver||Videos||HTML|
Solving Isolation Challenges in Power Conversion Applications
This webcast will present solutions to isolation challenges in power conversion applications. Among the topics to be discussed are the limitations of traditional methods of isolation (such as utilization of optocouplers and pulse transformers) vs. more efficient and cost effective solutions that utilize digital isolators. If you are currently using optocouplers and pulse transformers, this is a webcast you should attend.
Solving Isolation Challenges in Industrial Automation
This webcast will discuss the role isolation plays in providing protection and reducing the system bit-error-rate, using the specific design challenges of an RS-485 network. Topics to be covered in this presentation will include: Why and when one should isolate, Types of isolation and their advantages, Design Considerations for an RS-485 node (and how this translates to design considerations for signal isolation) as well as many other topics.
|UG-461: ezLINX iCoupler Isolated Interface Development Environment (pdf, 1915 kB)||User Guides|
|UG-400: ezLINX™ iCoupler® Isolated Interface Development Environment (pdf, 393 kB)||User Guides|
|UG-044: Evaluating the ADM2582E/ADM2587E (pdf, 272 kB)||User Guides|
|MS-2511: Integrated Signal and Power Isolation Provide Robust and Compact Measurement and Control (pdf, 366 kB)||Technical Articles|
|MS-2155: Options and Solutions for Partitioning Isolated Power in Isolated RS-485 Nodes (pdf, 290 kB)||Technical Articles|
Inside iCoupler® Technology:ADuM347x PWM Controller and Transformer Driver with Quad-Channel Isolators Design Summary
(pdf, 291 kB)
By Flow Zhao, Design Engineer
NAppkin Note: Lowering the Power of the ADuM524x
(pdf, 223 kB)
By Mark Cantrell, Senior Applications Engineer
High-Performance Multichannel Power-Line Monitoring with Simultaneous-Sampling ADCs
By Colm Slattery, Analog Devices, Inc. (Analog Dialogue, Vol. 41, January 2007)
|Analog Devices Achieves Major Milestone by Shipping 1 Billionth Channel of iCoupler Digital Isolation (19 Sep 2013)||Press Releases||HTML|
|Digital Isolator Product Selection and Resource Guide (pdf, 640 kB)||Product Selection Guide|
|Brochure: Motor and Power Control Solutions (pdf)||Overview|
|Industrial Automation Solutions (pdf, 6110 kB)||Overview|
|ADM2587E/ADM2582E: Signal and Power Isolated RS-485/RS-422 Transceivers (pdf, 2364 kB)||Overview|
Industrial ICs Solutions Bulletin, Volume 10, Issue 8
|Emerging Energy Applications Solutions Bulletin, Volume 10, Issue 4 (pdf, 1496 kB)||Solutions Bulletins|
|Test & Instrumentation Solutions Bulletin, Volume 10, Issue 3 (pdf, 1334 kB)||Solutions Bulletins|
|With which regulatory standards do iCoupler products comply?||FAQs/RAQs||HTML|
|RAQs index||Rarely Asked Questions||HTML|
|Glossary of EE Terms||Glossary||HTML|
|Title||Content Type||File Type|
|ADM2587E IBIS Model (ibs)||IBIS Models||IBS|
The ezLINX™ iCoupler® Isolated Interface Development Environment provides developers with a cost-effective, plug and play method for evaluation eight physical layer, digitally-isolated communication standards.
Evaluation board for evaluating the ADM2587E 2.5 kV Signal and Power Isolated, ±15 kV ESD Protected, Full/Half Duplex RS-485 Transceiver (500kbps)
Symbols and Footprints— Analog Devices offers Symbols & Footprints which are compatible with a large set of today’s CAD systems for broader and easier support.
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.