LTM4630

Name: LTM4630
Brand: Analog Devices
Price: 52.20 USD
Availability: InStock

RECOMMENDED FOR NEW DESIGNS

Dual 18A or Single 36A DC/DC μModule (Power Module) Regulator

Data Sheet (Rev. A) Product Selection Table

Part Models: 5
1ku List Price: Starting From $52.20

Viewing:

Overview

Dual 18A or Single 36A Output
Wide Input Voltage Range: 4.5V to 15V
Output Voltage Range: 0.6V to 1.8V
±1.5% Maximum Total DC Output Error Over Line, Load and Temperature
Differential Remote Sense Amplifier
Current Mode Control/Fast Transient Response
Adjustable Switching Frequency
Overcurrent Foldback Protection
Multiphase Parallel Current Sharing with Multiple LTM4630s Up to 144A

Frequency Synchronization
Internal Temperature Monitor
Pin Compatible with the LTM4620 and LTM4620A (Dual 13A, Single 26A) and LTM4628 (Dual 8A, Single 16A)
Selectable Burst Mode^® Operation
Soft-Start/Voltage Tracking
Output Overvoltage Protection
16mm × 16mm × 4.41mm LGA and 16mm × 16mm × 5.01mm BGA Packages

The LTM4630 is a dual 18A or single 36A output switching mode step-down DC/DC μModule^® (power module) regulator. Included in the package are the switching controllers, power FETs, inductors, and all supporting components. Operating from an input voltage range of 4.5V to 15V, the LTM4630 supports two outputs each with an output voltage range of 0.6V to 1.8V, each set by a single external resistor. Its high efficiency design delivers up to 18A continuous current for each output. Only a few input and output capacitors are needed. The LTM4630 is pin compatible with the LTM4620 and LTM4620A (dual 13A, single 26A) and the LTM4628 (dual 8A, single 16A).

The device supports frequency synchronization, multiphase operation, Burst Mode operation and output voltage tracking for supply rail sequencing and has an onboard temperature diode for device temperature monitoring. High switching frequency and a current mode architecture enable a very fast transient response to line and load changes without sacrificing stability.

Fault protection features include overvoltage and overcurrent protection. The LTM4630 is offered in 16mm × 16mm × 4.41mm LGA and 16mm × 16mm × 5.01mm BGA packages. The LTM4630 is ROHS compliant.


	Features	Vout
LTM4630		0.6V to 1.8V
LTM4630-1	0.8% DC and 3% Transient Accuracy	0.6V to 1.8V
LTM4630A	Higher Light Load Efficiency	0.6V to 5.3V

Applications

Telecom and Networking Equipment
Storage and ATCA Cards
Industrial Equipment

Part Models: 5
1ku List Price: Starting From $52.20

Documentation

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.

Part Model	Pin/Package Drawing	Documentation	CAD Symbols, Footprints, and 3D Models
LTM4630EV#PBF	144-Lead LGA (16mm x 16mm x 4.41mm)	Material Declaration Reliability Report Package Resources	Ultra Librarian SamacSys
LTM4630EY#PBF	144-Lead BGA (16mm x 16mm x 5.01mm)	Material Declaration Reliability Report Package Resources	Ultra Librarian SamacSys
LTM4630IV#PBF	144-Lead LGA (16mm x 16mm x 4.41mm)	Material Declaration Reliability Report Package Resources	Ultra Librarian SamacSys
LTM4630IY	144-Lead BGA (16mm x 16mm x 5.01mm)	Material Declaration Reliability Report Package Resources	Ultra Librarian SamacSys
LTM4630IY#PBF	144-Lead BGA (16mm x 16mm x 5.01mm)	Material Declaration Reliability Report Package Resources	Ultra Librarian SamacSys

Part Models	Product Lifecycle	PCN

Jul 28, 2021 - 20_0245 Notification of Wafer Fab Location Change for 0.6µm BICMOS Process Devices from ADI Milpitas (Hillview) to Vanguard Int. (Taiwan)
		PCN20_0245_Form Material_Report Other
LTM4630EV#PBF	PRODUCTION
LTM4630EY#PBF	PRODUCTION
LTM4630IV#PBF	PRODUCTION
LTM4630IY	PRODUCTION
LTM4630IY#PBF	PRODUCTION
Jul 21, 2021 - 21_0159 Ink Mark to Laser Mark Conversion for µModule
		PCN21_0159_Form Material_Report
LTM4630EV#PBF	PRODUCTION
LTM4630EY#PBF	PRODUCTION
LTM4630IV#PBF	PRODUCTION
LTM4630IY	PRODUCTION
LTM4630IY#PBF	PRODUCTION
Feb 28, 2020 - 20_0123 Micro-Module, Test Site Transfer from Analog Devices Singapore to Analog Devices Penang, Malaysia
		PCN20_0123_Form Material_Report Test Correlation Report Other Qualification Results Summary
LTM4630EV#PBF	PRODUCTION
LTM4630EY#PBF	PRODUCTION
LTM4630IV#PBF	PRODUCTION
LTM4630IY	PRODUCTION
LTM4630IY#PBF	PRODUCTION
Feb 5, 2020 - 20_0127 Supplier Material Change for µModule
		PCN20_0127_Form Material_Report Qualification Results Summary
LTM4630EV#PBF	PRODUCTION
LTM4630EY#PBF	PRODUCTION
LTM4630IV#PBF	PRODUCTION
LTM4630IY	PRODUCTION
LTM4630IY#PBF	PRODUCTION
Jul 25, 2019 - 19_0115 Notification of Additional Assembly Location, ASE Korea for LTM4630 and LTM4630A
		PCN19_0115_Form Material_Report Other Qualification Results Summary
LTM4630EV#PBF	PRODUCTION
LTM4630EY#PBF	PRODUCTION
LTM4630IV#PBF	PRODUCTION
LTM4630IY	PRODUCTION
LTM4630IY#PBF	PRODUCTION
Jul 22, 2019 - 19_0164 Notification of qualification of a new mold compound for the LTM4630 µModule Regulator
		PCN19_0164_Form Material_Report Qualification Results Summary
LTM4630EV#PBF	PRODUCTION
LTM4630EY#PBF	PRODUCTION
LTM4630IV#PBF	PRODUCTION
LTM4630IY	PRODUCTION
LTM4630IY#PBF	PRODUCTION

This is the most up-to-date revision of the Data Sheet.

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Hardware Ecosystem

Parts	Product Life Cycle	Description
Power System Management (PSM) & Sequencers 1
LTC2977	RECOMMENDED FOR NEW DESIGNS	8-Channel PMBus Power System Manager Featuring Accurate Output Voltage Measurement
Switching Regulators & Controllers 4
LTM4676	Obsolete	Dual 13A or Single 26A μModule (Power Module) Regulator with Digital Power System Management
LTM4649	RECOMMENDED FOR NEW DESIGNS	10A Step-Down DC/DC μModule (Power Module) Regulator
LTM4633	RECOMMENDED FOR NEW DESIGNS	Triple 10A Step-Down DC/DC μModule (Power Module) Regulator

LTM4650

RECOMMENDED FOR NEW DESIGNS

Dual 25A or Single 50A DC/DC μModule Regulator

Parts	Product Life Cycle	Description
LTM4630-1	RECOMMENDED FOR NEW DESIGNS	Dual 18A or Single 36A μModule (Power Module) Regulator with 0.8% DC and 3% Transient Accuracy
LTM4630A	RECOMMENDED FOR NEW DESIGNS	Dual 18A or Single 36A DC/DC μModule Regulator

Tools & Simulations

LTspice 6

Models for the following parts are available in LTspice:

LTM4630
LTM4630-1
LTM4630A

LTpowerCAD 5

Design tools for the following parts are available in LTpowerCAD:

LTM4630
LTM4630-1
LTM4630A

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

LTpowerCAD^® is a power supply design program which selects power stage components, provides detailed power efficiency, shows quick loop Bode plot stability and load transient analysis, and can export to LTspice for simulation.

Evaluation Kits

LTM4630 Demo Board | Dual Buck µModule Regulator, 4.5V ≤ VIN ≤ 15V, VOUT1 = 1.5V @ 18A, VOUT2 = 1.0V @ 18A

Buy Now View Details

Product Details

Demonstration circuit 1892A features the LTM4630EV, the high efficiency, high density, dual 18A, switch mode step-down power module regulator. The input voltage is from 4.5V to 15V. The output voltage is programmable from 0.6V to 1.8V. DC1892A can deliver up to 18A maximum in each channel. As explained in the LTM4630 data sheet, output current derating is necessary for certain V_IN, V_OUT and thermal conditions. The board operates in continuous conduction mode in heavy load conditions. For high efficiency at low load currents, the MODE jumper (JP1) selects pulse-skipping mode for noise-sensitive applications or Burst Mode^® operation in less noise-sensitive applications.

Resources

DC1892A - Design Files
2/4/2015

DC1892A - Schematic
2/4/2015

DC1892A - Demo Manual
2/4/2015

LTM4630 Demo Board | 70A Polyphase Step-Down (2x LTM4630), 4.5V ≤ VIN ≤ 15V, VOUT = 0.9V to 1.8V @ 70A

Buy Now View Details

Product Details

Demonstration Circuit 2007A-A features a PolyPhase^® design using the LTM4630EV, the high efficiency, high density, dual 18A, switch mode step-down power μModule^® regulator. The input voltage is from 4.5V to 15V. The output voltage is jumper selectable from 0.9V to 1.8V. The DC2007A-A can deliver a nominal 70A output current. As explained in the data sheet, output current derating is necessary for certain V_IN, V_OUT, and thermal conditions. The LTM4630 on the DC2007A-A always operates in continuous conduction mode. The switching frequency can be programmed through a resistor or can be synchronized to an external clock signal. The board allows the user to program how its output voltage ramps up and down through the TRACK pin.

Resources

DC2007A - Schematic
11/7/2013

DC2007A-A - Demo Manual
11/7/2013

DC2007A-A - Design Files
11/8/2013

LTM4630 Demo Board | 105A Polyphase Step-Down (3x LTM4630), 4.5V ≤ VIN ≤ 15V, VOUT = 0.9V to 1.8V @ 105A

Buy Now View Details

Product Details

Demonstration circuit 2007A-B features a PolyPhase^® design using the LTM4630EV, the high efficiency, high density, dual 18A, switch mode step-down power μModule^® regulator. The input voltage is from 4.5V to 15V. The output voltage is jumper selectable from 0.9V to 1.8V. The DC2007A-B can deliver a nominal 105A output current. As explained in the data sheet, output current derating is necessary for certain V_IN, V_OUT, and thermal conditions. The LTM4630 on DC2007A-B always operates in continuous conduction mode. The switching frequency can be programmed through a resistor or can be synchronized to an external clock signal.

Resources

DC2007A - Schematic
11/7/2013

DC2007A-B - Design Files
1/13/2014

DC2007A-B - Demo Manual
1/13/2014

LTM4630 Demo Board | 140A Polyphase Step-Down (4x LTM4630), 4.5V ≤ VIN ≤ 15V, VOUT = 0.9V to 1.8V @ 140A

Buy Now View Details

Product Details

Demonstration circuit 2007A-C features a PolyPhase^® design using the LTM4630EV, the high efficiency, high density, dual 18A, switch mode step-down power μModule^® regulator. The input voltage is from 4.5V to 15V. The output voltage is jumper selectable from 0.9V to 1.8V. The DC2007A-C can deliver a nominal 140A output current. As explained in the data sheet, output current derating is necessary for certain V_IN, V_OUT, and thermal conditions. The LTM4630 on the DC2007A-C always operates in continuous conduction mode. The switching frequency can be programmed through a resistor or can be synchronized to an external clock signal. The board allows the user to program how its output voltage ramps up and down through the TRACK pin.

Resources

DC2007A - Schematic
11/7/2013

DC2007A-C - Demo Manual
12/6/2013

DC2007A-C - Design File
12/6/2013

LTM4676AEY/LTM4630EV Demo Board | PMBus Buck µModule (LTM4676A) + LTM4630 (x3), 4.5V ≤ VIN ≤ 16V, VOUT = 0.5V to 1.8V @ 130A

Buy Now View Details

Product Details

Demonstration circuit 2106B-B is a high efficiency, high density, paralleled, multi-chip μModule regulator solution with a 4.5V to 16V input range and 130A of output current. The output voltage (1V default value) is adjustable from 0.5V to 1.8V. The demo board has 1× LTM4676A acting as the master controller, and 3× LTM4630 μModule slave controllers. All devices having their outputs paralleled to provide 130A of current. Please see the LTM4676A and LTM4630 data sheets for more detailed information.

Resources

DC2106B-B - Schematic
7/28/2015

DC2106B-B - Design Files
7/28/2015

DC2106B-B - Demo Manual
7/28/2015

LTM4630EV Demo Board | Step-Down μModule Regulator, 4.5V ≤ VIN ≤ 15V, VOUT = 1V @ 36A

Buy Now View Details

Product Details

Demonstration circuit 2081A-A features the LTM4630EV, the high efficiency, high density, dual 18A, switch mode step-down μModule^® regulator. The input voltage is from 4.5V to 15V. The output voltage is programmable from 0.6V to 1.8V. DC2081A-A is configured as dual-phase, single-output, which can deliver up to 36A maximum. The board designs with minimum components to demonstrate this high efficiency, high density μModule. As explained in the data sheet, output current de-rating is necessary for certain V_IN, V_OUT, and thermal conditions.