-
AD-FMCDAQ2-EBZ User Guide3/22/2019WIKI
製品概要
機能と利点
- Includes schematics, layout, BOM, Gerber files, HDL, Linux® drivers, IIO Oscilloscope, VisualANALOG
- FMC-compatible form factor
- Powered from FMC connector
- Provides two channels of ADC and two channels of DAC with full synchronization capabilities
製品概要
The AD-FMCDAQ2-EBZ module is comprised of the AD9680 dual, 14-bit, 1.0 GSPS, JESD204B ADC, the AD9144 quad, 16-bit, 2.8 GSPS, JESD204B DAC, the AD9523-1 14-output, 1GHz clock, and power management components. It is clocked by an internally generated carrier platform via the FMC connector, comprising a completely self-contained data acquisition and signal synthesis prototyping platform. In an FMC footprint (84 mm × 69 mm), the module’s combination of wideband data conversion, clocking, and power closely approximates real-world hardware and software for system prototyping and design, with no compromise in signal chain performance.Applications
- Electronic test and measurement equipment
- General-purpose software radios
- Radar systems
- Ultra wideband satellite receivers
- Point-to-point communication systems
Markets and Technologies
対象となる製品
Package Contents
- AD-FCMDAQ2-EBZ Board
- 8 GB SD Memory Card
はじめに
The AD-FMCDAQ2-EBZ module comes with an SD card with the Linux image. All the customer needs is to move the right files from the SD folders to the root based on which FPGA board he is using. Once that is done and the FPGA board is ready to boot of SD card, plug the AD-FMCDAQ2-EBZ module in an HPC FMC slot and turn on the board and they are ready to go.
The advantage of this board is that it has two TX and two RX channels so to start playing around with this demo there is no need for any other equipment other than couple of SMA cables to loop the TX to RX and start seeing the signal in IIO-scope.
Here is the link to our wiki page where customers can find all the info they need for this board:
The advantage of this board is that it has two TX and two RX channels so to start playing around with this demo there is no need for any other equipment other than couple of SMA cables to loop the TX to RX and start seeing the signal in IIO-scope.
Here is the link to our wiki page where customers can find all the info they need for this board:
http://wiki.analog.com/resources/eval/user-guides/ad-fmcdaq2-ebz/quickstart
リファレンス・ボード
Reference Board: AD-FMCDAQ2-EBZ
Hover over the colored pins to learn more about Analog Devices' products used on this board
- Product Categories:
- Clock and Timing
- Data Converters
- Interface and Isolation
- Power Management
ADP7104-3.3
High Accuracy 500mA LDO
ADP7104-3.3High Accuracy 500mA LDO
ADP17551.2A Low Vin LDO
ADP17412 A LDO
ADP1740-1.22 A LDO
ADP23844 A Switcher
ADP23844 A Switcher
ADP150Ultra Low Noice 150mA LDO
ADP150Ultra Low Noice 150mA LDO
ADP7104-3.3High Accuracy 500mA LDO
AD9144DAC. 16 bit 2.5 GSPS
ADN4661Buffer
ADN4661Buffer
AD9680ADC 14 bit 1 GSPS
AD72918 CH ADC
AD9523-1Low Jitter Clock Generator
関連資料
-
シリアル・インターフェース標準規格JESD2043/5/2015
-
データ・レートが 1GSPS でデュアルチャンネルのデータ・アクイジション・キット11/28/2018
購入
表示されている価格は、1個あたりの価格です。
価格は1個当たりの米ドルで、米国内における販売価格（FOB）で表示されておりますので、予算のためにのみご使用いただけます。 また、その価格は変更されることがあります。米国以外のお客様への価格は、輸送費、各国の税金、手数料、為替レートにより決定されます。価格・納期等の詳細情報については、弊社正規販売代理店または担当営業にお問い合わせください。なお、 評価用ボードおよび評価用キットの表示価格は1個構成としての価格です。