ADUM6000

PRODUCTION

Isolated, 5 kV, DC/DC Converter

Data Sheet (Rev. D) Product Selection Table

Part Models: 4
1ku List Price: Starting From $4.67

Viewing:

Overview

isoPower integrated, isolated DC/DC converter
Regulated 5 V or 3.3 V output
Up to 400 mW output power
16-lead SOIC package with >7.6 mm creepage
High temperature operation: 105°C maximum
High common-mode transient immunity: >25 kV/μs
Thermal overload protection

Safety and regulatory approvals
UL recognition (pending)
5000 V rms for 1 minute per UL 1577
CSA Component Acceptance
Notice #5A
IEC 60601-1: 125 V rms
See datasheet for additional features

The ADuM6000 is an isolated DC/DC converter based on the Analog Devices, Inc., iCoupler^® technology. The DC/DC converter in this device provides regulated, isolated power in several combinations of input and output voltages as listed in Table 1 on the data sheet.

The Analog Devices chip scale transformer iCoupler technology transfers isolated power in this DC/DC converter with up to 31% efficiency. The result is a small form factor, total isolation solution.

Higher output power levels are obtained by using the ADuM6000 to augment the power output of the ADuM5401, ADuM5402, ADuM5403, ADuM5404, ADuM520x, and ADuM620x iCouplers with isoPower^®.

isoPower^® uses high frequency switching elements to transfer power through its transformer. Special care must be taken during printed circuit board (PCB) layout to meet emissions standards. See the AN-0971 Application Note for board layout recommendations.

APPLICATIONS

USB peripheral power
RS-232/RS-422/RS-485 transceiver power
Industrial field bus power
Industrial PLCs

Part Models: 4
1ku List Price: Starting From $4.67

Documentation

Frequently Asked Question 1

FAQ 05/17/2017

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.

Part Model	Pin/Package Drawing	Documentation	CAD Symbols, Footprints, and 3D Models
ADUM6000ARIZ	16-Lead SOIC (Increased Creepage)	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
ADUM6000ARIZ-RL	16-Lead SOIC (Increased Creepage)	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
ADUM6000ARWZ	16-Lead SOIC Wide	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
ADUM6000ARWZ-RL	16-Lead SOIC Wide	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys

Part Models	Product Lifecycle	PCN

Nov 19, 2020 - 20_0303 ADuM6000/ADuM620x/ADuM640x Polyimide Insulation Material Change and Polyimide Overcoat
		PCN20_0303_Form Material_Report Qualification Results Summary
ADUM6000ARIZ	PRODUCTION
ADUM6000ARIZ-RL	PRODUCTION
ADUM6000ARWZ	PRODUCTION
ADUM6000ARWZ-RL	PRODUCTION
Nov 6, 2013 - 13_0281 Change of Moisture Sensitivity Level Rating for ADuM5000/ADuM6000 from MSL 1 to MSL 3
		PCN13_0281_Form Material_Report
ADUM6000ARIZ	PRODUCTION
ADUM6000ARIZ-RL	PRODUCTION
ADUM6000ARWZ	PRODUCTION
ADUM6000ARWZ-RL	PRODUCTION
Feb 27, 2012 - 11_0066 Qualification of Alternate Fab Foundry Gold Plating Process Site for Isolation Products at ADI Limerick.
		PCN11_0066_Form Material_Report Qualification Plan Summary Flow Chart
ADUM6000ARIZ	PRODUCTION
ADUM6000ARIZ-RL	PRODUCTION
ADUM6000ARWZ	PRODUCTION
ADUM6000ARWZ-RL	PRODUCTION