LTC6102

PRODUCTION

Precision Zero Drift Current Sense Amplifier

Viewing:

Overview

  • Supply Range:
    • 4V to 60V, 70V Maximum (LTC6102)
    • 5V to 100V, 105V Maximum (LTC6102HV)
  • ±10μV Input Offset Maximum
  • ±50nV/°C Input Offset Drift Maximum
  • Fast Response: 1μs Step Response
  • Gain Configurable with Two Resistors
  • Low Input Bias Current: 3nA Maximum
  • PSRR 130dB Minimum
  • Output Currents up to 1mA
  • Operating Temperature Range: –40°C to 125°C
  • Disable Mode (LTC6102-1 Only): 1μA Maximum
  • Available in 8-Lead MSOP and 3mm × 3mm DFN Packages

The LTC6102/LTC6102HV are versatile, high voltage, highside current sense amplifiers. Their high supply voltage rating allows their use in many high side applications, while the low drift and offset ensure accuracy across a wide range of operating conditions. The LTC6102-1 is a version of the LTC6102 that includes a low power disable mode to conserve system standby power.

The LTC6102/LTC6102HV monitor current via the voltage across an external sense resistor (shunt resistor). Internal circuitry converts input voltage to output current, allowing a small sense signal on a large common mode voltage to be translated to a ground-referred signal. Low DC offset allows the use of very low shunt resistor values and large gain-setting resistors. As a result, power loss in the shunt is reduced.

The wide operating supply and high accuracy make the LTC6102 ideal for a large array of applications, from automotive, to industrial and power management. A maximum input sense voltage of 2V allows a wide range of currents and voltages to be monitored. Fast response makes the LTC6102 the perfect choice for load current warnings and shutoff protection control.

All versions of the LTC6102 are available in 8-lead MSOP and 3mm × 3mm DFN packages.

Applications

  • Current Shunt Measurement
  • Battery Monitoring
  • Remote Sensing
  • Load Protection
  • Motor Control
  • Automotive Controls

LTC6102
Precision Zero Drift Current Sense Amplifier
10A Current Sense with 10mA Resolution and 100mW Maximum Dissipation Dynamic Current Measurement Range Product Package 1 Product Package 2
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Hardware Ecosystem

Parts Product Life Cycle Description
Analog to Digital Converters (ADCs) 1
LTC2991 RECOMMENDED FOR NEW DESIGNS Octal I2C Voltage, Current, and Temperature Monitor
Circuit Monitors 1
LT2940 PRODUCTION Power and Current Monitor
Current Mirrors & Matched Devices 1
LT5400 RECOMMENDED FOR NEW DESIGNS Quad Matched Resistor Network
Current Sense Amplifiers 1
LTC4151 PRODUCTION High Voltage I2C Current and Voltage Monitor
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Tools & Simulations

LTspice 1


Models for the following parts are available in LTspice:

  • LTC6102
LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.


Evaluation Kits

eval board
DC907A-B

LTC6102, LT6100, LT1787, LTC2054, and LTC2439-1 (Requires DC590B) | Demo Board

Product Details

DC907A-B Demo Board for:

LTC2054 Single Micropower Zero-Drift Operational Amplifiers
LTC6102 Precision Zero Drift Current Sense Amplifier
LT1787 Precision, High Side Current Sense Amplifiers
LT6100 Precision, Gain Selectable High Side Current Sense Amplifier
LTC2439-1 8-/16-Channel 16-Bit No Latency Delta Sigma ADC

eval board
DC1536A

LTC6102-1 Current Sense Demo Board with Enable Feature

Product Details

DC1536A: Demo Board for the LTC6102 Precision Zero Drift Current Sense Amplifier.

eval board
DC1113A

LTC6102 Current Sense Demo Board

Product Details

DC1113A: Demo Board for the LTC6102 Precision Zero Drift Current Sense Amplifier


 


DC907A-B
LTC6102, LT6100, LT1787, LTC2054, and LTC2439-1 (Requires DC590B) | Demo Board
DC907A-B - Schematic
DC1536A
LTC6102-1 Current Sense Demo Board with Enable Feature
DC1536A - Schematic
DC1113A
LTC6102 Current Sense Demo Board
DC1113A Demo Board DC1113A Demo Board DC1113A Demo Board DC1113A Demo Board DC1113A - Schematic

Latest Discussions

Recently Viewed