TMCM-035

量产

TMCM-035

产品选型表
产品技术资料帮助

ADI公司所提供的资料均视为准确、可靠。但本公司不为用户在应用过程中侵犯任何专利权或第三方权利承担任何责任。技术指标的修改不再另行通知。本公司既没有含蓄的允许，也不允许借用ADI公司的专利或专利权的名义。本文出现的商标和注册商标所有权分别属于相应的公司。
Viewing:

概述

Electrical Data:

  • Up to 3.5A RMS coil current (5A peak)
  • 14V to 50V DC motor supply voltage
  • 5V DC logic supply voltage

Interface:

  • Step / Direction input (TTL/CMOS signal)
  • SPITM interface
  • Classical analog interface

Other:

  • 68 pin connector carries all signals
  • RoHS compliant
  • Size: 80x50mm² (credit card)

Highlights:

  • Up 64 times microstepping, since version 2.0 (prev. versions up to 16)
  • Motor current settings via internal and / or external resistors
  • Up to 245kHz microstep frequency
  • ADI TRINAMIC driver technology: No heat sink required
  • StallGuardTM optional for SPI operation
  • Standby reduction programmable
  • “mixed-decay” mode for good microstep performance mode
  • low EME design for ease of use

Supported Motors:

  • two-phase bipolar motors with 0.3A to 3.5A coil current

The TMCM-035/SG-H is a compact motor driver module for highly dynamic or high-torque axis. It can be combined with the driver-less modules TMCM-3x1 or TMCM-3x2, or with any step / direction controller. Its small size and low power dissipation, together with the variety of three different control interfaces, make it an optimum solution for integration on any user board. The board can be connected to a baseboard or customized electronics with a pin connector. Applications are consumer and industrial controls, CNC power stages, lab automatization, robotics, pick- and place machines.

The related product version TMCM-035/SG-V obsolete.

Applications

  • Driver module for a highly dynamic or high torque axis
  • Easy integration through three different control interfaces into any user board
TMCM-035
TMCM-035
TMCM-3351 Block Diagram tmcm-3351
添加至 myAnalog

将产品添加到myAnalog 的现有项目或新项目中（接收通知）。

创建新项目
提问

参考资料

用户手册 1

了解更多
添加至 myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

创建新项目

软件资源

找不到您所需的软件或驱动?

申请驱动/软件

硬件生态系统

部分模型 产品周期 描述
电机驱动器和运动控制器IC 1
TMCM-1231
量产 Plug-In stepper motor controller/driver module 10 to 52V, 6.5A, 256 µSteps, SixPoint ramp controller with CAN, RS485 and S/D Interface, StallGuard, CoolStep, StealthChop
Modal heading
添加至 myAnalog

将产品添加到myAnalog 的现有项目或新项目中（接收通知）。

创建新项目

最新评论

需要发起讨论吗？ 没有关于 TMCM-035的相关讨论？是否需要发起讨论？

在EngineerZone®上发起讨论

近期浏览