Добавить к Мастеру создания структурных схем

AD7367:  True Bipolar Input, Dual 14-Bit, 2-Channel, Simultaneous Sampling SAR ADC

Информация о продукте

Статус продукта:Производство

The AD7366/AD7367 are dual 12-bit/14-bit, high speed, low power, successive approximation analog-to-digital converters (ADCs) that feature throughput rates up to 1 MSPS. The device contains two ADCs, each preceded by a 2-channel multiplexer, and a low noise, wide bandwidth track-and-hold amplifier.

The AD7366/AD7367 are fabricated on the Analog Devices, Inc., industrial CMOS process (iCMOS1), which is a technology platform combining the advantages of low and high voltage CMOS. The iCMOS process allows the AD7366/AD7367 to accept high voltage bipolar signals in addition to reducing power consumption and package size. The AD7366/AD7367 can accept true bipolar analog input signals in the ±10 V range, ±5 V range, and 0 V to 10 V range.

The AD7366/AD7367 have an on-chip 2.5 V reference that can be disabled to allow the use of an external reference. If a 3 V reference is applied to the DCAPA and DCAPB pins, the AD7366/AD7367 can accept a true bipolar ±12 V analog input. Minimum ±12 V VDD and VSS supplies are required for the ±12 V input range.

Product Highlights

  1. The AD7366/AD7367 can accept true bipolar analog input signals, as well as ±10 V, ±5 V, ±12 V (with external reference), and 0 V to 10 V unipolar signals.
  2. Two complete ADC functions allow simultaneous sampling and conversion of two channels.
  3. 1 MSPS serial interface: SPI-/QSPI-/DSP-/MICROWIRE-compatible interface.

2 iCMOS Process Technology. For analog systems designers within industrial/instrumentation equipment OEMs who need high performance ICs at higher voltage levels, iCMOS is a technology platform that enables the development of analog ICs capable of 30 V and operating at ±15 V supplies while allowing dramatic reductions in power consumption and package size, and increased ac and dc performance.

ОСОБЕННОСТИ И ПРЕИМУЩЕСТВА

  • Dual 12-bit/14-bit, 2-channel ADC
  • True bipolar analog inputs
  • Programmable input ranges:
    ±10 V, ±5 V, 0 V to 10 V
    ±12 V with 3 V external reference
  • Throughput rate: 1 MSPS
  • Simultaneous conversion with read in less than 1 μs
  • Low current consumption:
    8.3 mA typical in normal mode
    320 nA typical in shutdown mode
  • High analog input impedance
  • AD7366
    72 dB SNR at 50 kHz input frequency
    12-bit no missing codes
  • AD7367
    76 dB SNR at 50 kHz input frequency
    14-bit no missing codes
  • Accurate on-chip reference: 2.5 V ± 0.2%
  • −40°C to +85°C operation
  • High speed serial interface Compatible with SPI®, QSPI™, MICROWIRE™, and DSP

Functional Block Diagram for AD7367

Suggested Complementary Products

Recommended Input Driver Amplifiers for the AD7367
  • For high speed, low power, low cost in single ended applications, we recommend the AD8021, AD8031 or the ADA4899-1.
  • For lower frequency applications, we recommend AD797, AD8597 or the AD8610.
Recommended Precison References - 2.5V - 3.0V for the AD7367
  • For high output current applications, we recommend the ADR431 or the REF193.
  • For wide supply applications, we recommend the AD780.
  • For cost sensitive applications, we suggest the AD1582 or the ADR391
Recommended Power Solutions

Were these recommendations helpful?

Документация

Наименование Тип контента Тип файлов
AD7366/AD7367: True Bipolar Input, Dual 12-Bit/14-Bit, 2-Channel, Simultaneous Sampling SAR ADC Data Sheet (Rev D, 11/2010) (pdf, 634 kB) Технические описания PDF
AD7367: True Bipolar Input, Dual 1µs, 14-Bit, 2-Channel SAR ADC Preliminary Data Sheet (Rev PrD, 11/2006) (pdf, 205 kB) Технические описания PDF
CN-0042: Driving the AD7366/AD7367 Bipolar SAR ADC in Low-Distortion DC-Coupled  (pdf, 130 kB) Circuit Note PDF
UG-408: Evaluating the AD7366/AD7367  (pdf, 1159 kB) Руководства пользователей PDF
MS-2210: Designing Power Supplies for High Speed ADC  (pdf, 327 kB) Технические статьи PDF
ICs for Programmable Logic Control and Distributed Control Systems  (pdf, 976 kB)
Analog Devices leadership in industrial IC technology, with the development of the iCMOS™ and iPolar™ processes, has uniquely defined high voltage and low voltage integration to deliver smaller, higher performance, and more cost effective ICs for industrial systems.
Обзор PDF
RAQs index Rarely Asked Questions HTML
Словарь терминов Глоссарий HTML

Средства разработки, программные модели, драйверы и ПО

Наименование Тип контента Тип файлов
BeMicro FPGA Project for AD7367 with Nios driver Device Drivers HTML

Оценочные наборы, обозначения компонентов и шаблоны посадочных мест на ПП

Оценочные платы и наборыОзнакомьтесь с документацией и условиями покупки

Обозначения и посадочные места— Analog Devices предлагает библиотеку обозначений для принципиальных схем и шаблонов посадочных мест для разводки плат, совместимую с большинством САПР.

Рекомендации по выбору продуктов и типовые проекты

Разработаны. Протестированы. Готовы к интеграции.
Узнать больше

Сопутствующие компоненты

Suggested Companion Products


Recommended Input Driver Amplifiers for the AD7367

  • For high speed, low power, low cost in single ended applications, we recommend the AD8021, AD8031 or the ADA4899-1.
  • For lower frequency applications, we recommend the AD8597 or the ADA4627.

Recommended Precison References - 2.5V - 3.0V for the AD7367

  • For high output current applications, we recommend the ADR431 or the REF193.
  • For wide supply applications, we recommend the AD780.
  • For cost sensitive applications, we suggest the AD1582 or the ADR391.
Recommended Voltage Regulators for the AD7367
  • For low dropout regulators with inputs up to 5V, we recommend the low noise ADP151 or the low power ADP160.
  • For high current switching regulators with inputs up to 5V, we recommend the low noise ADP2114.
Recommended Power Solutions
  • For selecting voltage regulator products, use ADIsimPower.

Were these recommendations helpful?

SampleОбразцы / Покупка

Цены, исполнение ИМС, наличие на складе

AD7367 Model Options
Помощь

Приведенные цены действительны в США и указаны только для примерного бюджетного рассчета. Цены указаны в долларах США (за штуку в указанном размере партии) и могут быть изменены. Цены в других регионах могут отличаться в зависимости от местных пошлин, налогов, сборов и курсов валют. Для уточнения стоимости обращайтесь в местные офисы продаж Analog Devices, или к официальным дистрибьюторам. Цены на оценочные платы и наборы указаны за штуку независимо от количества.

Модели Описание Цена Без использования свинца PCN/PDN Проверка наличия/
Покупка/Запрос образца
EVAL-AD7367SDZ Статус: Prodn Evaluation Board $ 59,00 Да -
EVAL-SDP-CB1Z Статус: Prodn Evaluation Controller Board $ 99,00 Да -

Цены указаны за одну штуку, в долларах США, на условиях ФОБ. Являются рекомендованными розничными ценами в США, приведены только для примерного расчета и могут меняться. Международные цены могут отличаться на величину местных пошлин, налогов, сборов и курсов валют.

Проверка наличия и приобретение

Просмотр списка дистрибьюторов и офисов продаж
Review this Product X
content here.
content here.

Review this Product

Закрыть