製品概要

機能と利点

  • Adjustable Undervoltage and Overvoltage Protection
  • Foldback Current Limit
  • Adjustable Current Limit Time-Out
  • VCC: 2.97V to 16.5V Normal Operation, Protected Against Surges to 33V
  • Single Channel NFET Driver
  • Latch Off or Automatic Retry on Current Fault
  • Driver for SCR Crowbar on Overvoltage
  • Adjustable Reset Timer
  • Reference Output with Uncommitted Comparator
  • 16-Pin SSOP Package

製品概要

The LTC1642A is a 16-pin Hot Swap™ controller that allows a board to be safely inserted and removed from a live backplane. Using an external N-Channel pass transistor, the board supply voltage can be ramped up at an adjustable rate. A high side switch driver controls the N-Channel gate for supply voltages ranging from 2.97V to 16.5V.

The SENSE pin allows foldback limiting of the load current, with circuit breaker action after an adjustable delay time. The delay allows the part to power-up in current limit. The CRWBR output can be used to trigger an SCR for crowbar protection of the load if the input supply exceeds an adjustable threshold. The RESET output can generate a system reset with adjustable delay when the supply voltage falls below an adjustable threshold. The ON pin cycles the board power. The LTC1642A is available in the 16-pin SSOP package.

Notes
LTC1642
LTC1642A Recommended for application where VCC is Higher than 12V

Applications

  • Hot Board Insertion
  • Electronic Circuit Breaker
  • InfiniBand Systems

製品ライフサイクル icon-recommended 製造中

この製品ファミリーの1つ以上の型番が生産/供給中です。新規の設計に適していますが、より新しい代替製品を提供している場合があります。

おすすめ製品

LTC1642A 互換製品

推奨製品 Related Parts

設計リソース

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

PCN-PDN Information

サンプル&購入


サンプルは、外部のADI Sample Siteでのご注文となります。選択したパーツはSample Siteログイン後、カートに引き継がれます。Sample Siteを初めて使用する際は、アカウント登録をお願いいたします。Sample Siteに関するご質問は、SampleSupport@analog.com までお問合せください。

 

モデル一覧の項目説明