LT3650-8.X

PRODUCTION

High Voltage 2 Amp Monolithic 2-Cell Li-Ion Battery Charger

Viewing:

Overview

  • Wide Input Voltage Range: 9V to 32V (40V Absolute Maximum)
  • Programmable Charge Current: Up to 2A
  • User-Selectable Termination: C/10 or Onboard Termination Timer
  • Dynamic Charge Rate Programming/Soft-Start Pin
  • Programmable Input Current Limit
  • 1MHz Fixed Frequency
  • Average Current Mode Control
  • 0.5% Float Voltage Accuracy
  • 5% Charge Current Accuracy
  • 2.5% C/10 Detection Accuracy
  • NTC Resistor Temperature Monitor
  • Auto-Recharge at 97.5% Float Voltage
  • Auto-Precondition at <70% Float Voltage
  • Bad Battery Detection with Auto-Reset
  • Binary Coded Open-Collector Status Pins
  • 3mm × 3mm DFN-12 or MSOP-12 Package

The LT3650 is a complete monolithic 2-cell Li-Ion/Polymer battery charger that operates over a 9V to 32V input voltage range (11.5V minimum start-up voltage). The LT3650 provides a constant-current/constant-voltage charge characteristic, with maximum charge current externally programmable up to 2A, set using an external current sense resistor. A precondition feature trickle-charges a low voltage battery, and bad-battery detection provides a signal and suspends charging if a battery does not respond to preconditioning.

The LT3650 can be configured to terminate charging when charge current falls to C/10, or one-tenth the programmed maximum current. Once charging is terminated, the LT3650 enters a low current (85μA) standby mode. An auto-restart feature starts a new charging cycle if the battery voltage drops 2.5% from the float voltage, or if a new battery is inserted into a charging system.

The LT3650 contains a user-programmable internal safety timer (typically set to a three hour full cycle time). The IC can be configured to use this internal timer if a time-based termination scheme is desired in which charging can continue below C/10 until a desired time is reached.

The LT3650 is available in a low profile (0.75mm) 3mm × 3mm 12-pin DFN and 12-pin MSOP packages.


Float Voltage
LT3650-4.1 4.1V
LT3650-4.2 4.2V
LT3650-8.2 8.2V
LT3650-8.4 8.4V

Applications

  • Industrial Handheld Instruments
  • 12V to 24V Automotive and Heavy Equipment
  • Desktop Cradle Chargers
  • Notebook Computers

LT3650-8.X
High Voltage 2 Amp Monolithic 2-Cell Li-Ion Battery Charger
11.5V to 32V 2-Cell 2A Charger Charge Current, Efficiency and Power Loss vs Time Product Package 1 Product Package 2
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Hardware Ecosystem

Parts Product Life Cycle Description
Battery Charger ICs 2
LT3652HV RECOMMENDED FOR NEW DESIGNS Power Tracking 2A Battery Charger
LTM8061 RECOMMENDED FOR NEW DESIGNS 32V, 2A μModule (Power Module) Li-Ion/Polymer Battery Charger
Battery Monitors & Fuel Gauges 2
LTC4150 PRODUCTION Coulomb Counter/Battery Gas Gauge
LTC2943 NOT RECOMMENDED FOR NEW DESIGNS Multicell Battery Gas Gauge with Temperature, Voltage and Current Measurement
Protection Switches & Controllers 1
LTC4365 RECOMMENDED FOR NEW DESIGNS Overvoltage, Undervoltage and Reverse Supply Protection Controller
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Tools & Simulations

LTspice 2


Models for the following parts are available in LTspice:

  • LT3650-4.1
  • LT3650-4.2
  • LT3650-8.2
  • LT3650-8.4
LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.


Evaluation Kits

eval board
DC1473A-B

LT3650EDD-8.2 Demo Board | High Voltage 2 Amp Monolithic Li-Ion Battery Charger

Product Details

DC1473A-B: Demo Board for the LT3650-8.X High Voltage 2 Amp Monolithic 2-Cell Li-Ion Battery Charger.

eval board
DC1473A-A

LT3650EDD-8.4 Demo Board | High Voltage 2 Amp Monolithic 2-Cell Li-Ion Battery Charger

Product Details

DC1473A-A: Demo Board for the LT3650-8.X High Voltage 2 Amp Monolithic 2-Cell Li-Ion Battery Charger.

DC1473A-B
LT3650EDD-8.2 Demo Board | High Voltage 2 Amp Monolithic Li-Ion Battery Charger
DC1473A-B Demo Board DC1473A-B Demo Board DC1473A-B Demo Board DC1473A-B Demo Board DC1473A-A - Schematic
DC1473A-A
LT3650EDD-8.4 Demo Board | High Voltage 2 Amp Monolithic 2-Cell Li-Ion Battery Charger
DC1473A-B Demo Board DC1473A-B Demo Board DC1473A-B Demo Board DC1473A-B Demo Board DC1473A-A - Schematic

Latest Discussions

No discussions on LT3650-8.2 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed