ADL6332

推荐用于新设计

0.38 GHz to 15 GHz RxVGA

数据手册 (Rev. A) 产品选型表

产品模型: 4

Viewing:

概述

Broadband RxVGA interfacing LNA and beamformer to RF-ADC
Operating frequency range: 0.38 GHz to 15 GHz, 2 product variants

ADL6332-A: 0.38 GHz to 8.0 GHz
ADL6332-B: 1.0 GHz to 15.0 GHz

Differential signal chain optimizes common mode rejection of RF ADC, even order harmonics and intermodulation
50 Ω single-ended input and 50 Ω differential output
Integrated broadband RF input balun
70 dB of gain control range in 1 dB step
RF DSA range: 24.0 dB with 1.0 dB step
Amplifier bypass loss of 12 dB each

Asynchronous toggle between multiple pre-defined attenuation values and bypass amplifier stages.
Power gain at 4 GHz: 15.0 dB (ADL6332-A), 15.7 dB (ADL6332-B)
Noise figure at 4 GHz: 8.5 dB (ADL6332-A), 8.5 dB (ADL6332-B)
OIP3 at 4GHz: 32.8 dBm(ADL6332-A), 30.9 dBm (ADL6332-B)
OIP2 at 4GHz: 59.6 dBm (ADL6332-A), 55.5 dBm (ADL6332-B)
OP1dB at 4GHz: 11.8 dBm (ADL6332-A), 12.6 dBm (ADL6332-B)
Fully programmable through a 3-wire/4-wire SPI
Single 3.3 V supply
24-terminal, 4.0 mm x 4.0 mm LGA

The ADL6332 RxVGA provides an interface from LNA/beam former/ Rx front end to RF analog-to-digital converters (RF-ADC). Each ADL6332 IC is composed of a balun, two differential RF amplifiers with bypass attenuators, and a digital step attenuator (DSA) to provide suitable receiver performance in a 24-terminal, 4.0 mm x 4.0 mm LGA package.

Serial-port interface (SPI) control is available to configure RF signal path or to optimize supply current vs. performance.

An integrated RF balun is used to provide a single-ended input over 0.38 GHz to 8.0 GHz (ADL6332-A) or 1.0 GHz to 15.0 GHz (ADL6332-B) with good impedance match.

Applications

Aerospace and defense

Instrumentation and test equipment

Communication system

产品模型: 4

参考资料

数据手册 1

ADL6332: 0.38 GHz to 15 GHz RxVGA Data Sheet (Rev.A) 07/30/2024

应用笔记 1

AN-2168: RF System Development with High-Speed Data Converter 07/16/2025

ADI 始终高度重视提供符合最高质量和可靠性水平的产品。我们通过将质量和可靠性检查纳入产品和工艺设计的各个范围以及制造过程来实现这一目标。出货产品的“零缺陷”始终是我们的目标。查看我们的质量和可靠性计划和认证以了解更多信息。

产品型号	引脚/封装图-中文版	文档	CAD 符号，脚注和 3D模型
ADL6332ACCZA	24-Terminal LGA (4 mm x 4mm x 0.76 mm)	Material Declaration Reliablity Data 资料包	Ultra Librarian SamacSys
ADL6332ACCZA-R7	24-Terminal LGA (4 mm x 4mm x 0.76 mm)	Material Declaration Reliablity Data 资料包	Ultra Librarian SamacSys
ADL6332ACCZB	24-Terminal LGA (4 mm x 4mm x 0.76 mm)	Material Declaration Reliablity Data 资料包	Ultra Librarian SamacSys
ADL6332ACCZB-R7	24-Terminal LGA (4 mm x 4mm x 0.76 mm)	Material Declaration Reliablity Data 资料包	Ultra Librarian SamacSys

这是最新版本的数据手册

软件资源

找不到您所需的软件或驱动?

申请驱动/软件

硬件生态系统

部分模型	产品周期	描述
线性稳压器 1
LTM4709	推荐用于新设计	具有可配置输出阵列的三通道3A、超低噪声、高PSRR、超快速μModule线性稳压器

工具及仿真模型

S-参数 2

LTspice^®是一款强大高效的免费仿真软件、原理图采集和波形观测器，为改善模拟电路的仿真提供增强功能和模型。

评估套件

Evaluating the ADL6332, 0.38 GHz to 15 GHz RxVGA

立即购买更多内容

特性和优点

Full featured evaluation board for the ADL6332-EVALZA and the ADL6332-EVALZB
Single-supply operation
Easy to use interface with Analysis | Control | Evaluation (ACE) software

产品详情

The ADL6332-EVALZA and the ADL6332-EVALZB evaluation boards allow the manual control of the ADL6332 through the USB port on a Microsoft^® Windows^® PC through an SDP-S interface board.

The ADL6332 data sheet provides additional information on the ADL6332. Consult the data sheet in conjunction with this user guide when using the ADL6332-EVALZA and the ADL6332-EVALZB evaluation boards.

资料

UG-2206: Evaluating the ADL6332, 0.38 GHz to 15 GHz RxVGA (Rev.A)
2024/7/30