LTC3119

RECOMMENDED FOR NEW DESIGNS

18V, 5A Synchronous Buck-Boost DC/DC Converter

Viewing:

Overview

  • Input Voltage Range: 2.5V to 18V
  • Runs Down to VIN = 250mV After Start-Up
  • Output Voltage Range: 0.8V to 18V
  • 5A Output Current in Buck Mode, VIN > 6V
  • 3A Output Current for VIN = 3.6V, VOUT = 5V
  • Programmable Switching Frequency: 400kHz to 2MHz
  • Synchronizable with an External Clock Up to 2MHz
  • Accurate Run Comparator Threshold
  • Burst Mode® Operation, No-Load IQ = 35μA
  • Ultralow Noise Buck-Boost PWM
  • Current Mode Control
  • Maximum Power Point Control
  • Power Good Indicator
  • Internal Soft-Start
  • 28-Lead 4mm × 5mm QFN and TSSOP Packages
LTC3119
18V, 5A Synchronous Buck-Boost DC/DC Converter
Wide Input Range 5V Regulator Efiiciency Product Package 1 Product Package 2
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Hardware Ecosystem

Parts Product Life Cycle Description
Switching Regulators & Controllers 2
LTC3785 PRODUCTION 10V, High Efficiency, Synchronous, No RSENSE Buck-Boost Controller
LTC3785-1 PRODUCTION 10V, High Efficiency, Buck-Boost Controller with Power Good
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Tools & Simulations

LTspice


Models for the following parts are available in LTspice:

  • LTC3119

LTpowerCAD 1


Design tools for the following parts are available in LTpowerCAD:

  • LTC3119
LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

LTpowerCAD

LTpowerCAD® is a power supply design program which selects power stage components, provides detailed power efficiency, shows quick loop Bode plot stability and load transient analysis, and can export to LTspice for simulation.


Evaluation Kits

eval board
DC2129A

LTC3119 Demo Board | Synchronous Buck-Boost, 2.5V ≤ VIN ≤ 18V, VOUT = 5V @ up to 5A

Product Details

Demonstration circuit 2129A features the LTC3119, an 18V, 5A synchronous buck/boost DC/DC converter. The DC2129A has been designed for an input voltage range of 2.5V to 18V with an output voltage (VOUT) set to 5V. For VIN > 5V the output current can be as high as 5A. The unique 4-switch, single inductor architecture provides low noise and seamless operation from input voltages above, below, or equal to the output voltage.

DC2129A
LTC3119 Demo Board | Synchronous Buck-Boost, 2.5V ≤ VIN ≤ 18V, VOUT = 5V @ up to 5A
DC2129A Demo Board DC2129A Demo Board DC2129A Demo Board DC2129A Demo Board DC2129A - Schematic

Latest Discussions

Recently Viewed