隔离放大器
隔离放大器用于防止数据采集器件遭受远程传感器出现的潜在破坏性电压的影响。这些放大器还用于在多通道应用中放大低电平信号。它们也可以消除由接地环路引起的测量误差。由于不需要附加的隔离电源, 带有内部变压器的隔离放大器可以降低电路成本。
Loading Selection Table Data. Please wait...
Processing request. Please wait.
Help
- Sort: Click on the arrows beneath the parameter on which you would like to sort, ascending and descending order.
- Add/Remove Parameters: Click on the Add/Remove Parameters button. Select/deselect the checkbox of the parameter in the add/remove parameter pop up box. Click on "Update" for the table to redraw with new selection of parameters.
- Filter: Enter the desired value to filter parameter(s) by, and click the "Update Results" button to update the table display.
- Reset Table: Click "Reset Table" to clear all filters/sorts and restore table back to default view.
- Quick Filters: When applicable, select a quick filter with preset parameters filtered to narrow the results returned.
|
Part#
Results: 8
| # Ports/Ch | Supply Voltage (V) | Supply Current (max) | Isolation Voltage (Vrms) | Bandwidth G = 1 (kHz) | Gain | Input Range (V) | Price* (1000-4999) |
|---|---|---|---|---|---|---|---|---|
|
Sort
parameter |
 
|
|
|
|
|
|
|
|
| AD202 | 2 | +15 | 5 | 1500 | 5 | 1 to 100 | ±5 |
$ |
| AD203 | 2 | +15 | 20 | 1500 | 10 | 1 to 10 | ±10 |
$ |
| AD204 | 2 | n/a | n/a | 1500 | 5 | 1 to 100 | ±5 |
$ |
| AD208 | 2 | n/a | n/a | 1500 | 4 | 1 to 1000 | ±5 |
$ |
| AD210 | 3 | +15 | 50 | 2500 | 20 | 1 to 100 | ±10 |
$ |
| AD215 | 2 | ±15 | 40 | 1500 | 120 | 1 to 100 | ±10 |
$ |
| AD260 | 5 | +5 | 4 | 1250 | n/a | n/a | - |
$ |
| AD261 | 5 | +5 | 4 | 1250 | n/a | n/a | - |
$ |