Isolation Amplifiers

Isolation amplifiers protect data-acquisition components from potentially destructive voltages present at remote transducers. These amplifiers are also useful when you need to amplify low-level signals in multi-channel applications. They can also eliminate measurement errors caused by ground loops. Amplifiers with internal transformers reduce circuit costs by eliminating the need for additional isolated power supply.

PRODUCT SELECTION TABLES

All Design Tools

  • Filter Filter
    Analog Filter Wizard 2.0

    The Analog Filter Wizard™ helps you design a low-pass, high-pass, band-pass or band-stop filter with actual op amps. It then simulates the filter’s performance with these op amps in real time. You can ask the tool to optimize for power, noise, or voltage range, and it will pick op amps and passive components appropriately. Or you can adjust the components manually yourself.

  • Photodiode Photodiode
    Analog Photodiode Wizard

    The photodiode web tool helps you select and design the best circuit for your application. To use the tool, enter the specifications of your light input, including intensity, spectral band, and the required signal bandwidth. These inputs will narrow down the available photodiode part numbers.

  • Amp Tools Amp Tools
    Amp Tools

    View all tools available for Analog Devices' Amplifiers products.

  • Product Search Product Search
    Product Search

    Search, compare and select products using our parametric selection tables.

  • ADIsimADC ADIsimADC
    ADIsimADC

    The ADIsimADC tool is an aid to help in the selection of Analog to Digital Converterse (ADC's), perform evaluations and assist with troubleshooting. The tool uses typical data values to mathematically model the general behavior of the selected ADC. It allows a user to apply input signals, set encode (sample) rates and simulate FFT's on a selected ADC. It is useful for checking the SNR, SFDR, SINAD, THD, ENOB etc. of a selected ADC.

  • ADIsimDAC ADIsimDAC
    ADIsimDAC

    ADIsimDAC assists the user with finding Analog Devices' DACs and DAC Application Circuits. It takes user inputs along Typical Parametric Data to sort, select and suggest applicable DAC's, system components and circuit solutions.

  • ADC/DAC Tools ADC/DAC Tools
    Amp Tools

    View all tools available for Analog Devices' Data Converters products.

  • Product Search Product Search
    Product Search

    Search, compare and select products using our parametric selection tables.

  • ADIsimRF ADIsimRF
    ADIsimRF

    ADIsimRF is an easy-to-use RF signal chain calculator. Cascaded Gain, Noise Figure, IP3 and P1dB as well as total power consumption are calculated. The number of stages can be varied up to a maximum of 15. Additional stages can be inserted at any point in teh signal chain and individual stages can be temporarily disabled or deleted. The calculator can be switched between Transmit Mode and Receive Mode where calculations are presented output-referred and input-referred respectively.

  • ADIsimPLL ADIsimPLL
    ADIsimPLL

    The ADIsimPLL design tool is a comprehensive and easy-to-use PLL synthesizer design and simulation tool. All key non-linear effects that can impact PLL performance can be simulated, including phase noise, Fractional-N spurs, and anti-backlash pulse. ADIsimPLL design tool eliminates time-consuming iterations from the PLL/synthesizer development process.

  • RF Tools RF Tools
    RF Tools

    View all tools available for Analog Devices' RF ICs.

  • Product Search Product Search
    Product Search

    Search, compare and select products using our parametric selection tables.

  • ADIsimPower ADIsimPower
    ADIsimPower

    ADIsimPower™ Voltage Regulator Design Tool produces custom DC-DC converter designs in about one minute. The user enters 5 inputs and chooses to optimize for efficiency, PCB space, cost, or part count. Output is a complete schematic, BOM, efficiency plot, and performance summary. A PDF summary and a blank PCB is offered for each design to facilitate fast prototyping to verify the design.

  • Digital Power Management Digital Power Management
    Digital Power Management

    ADI's digital PWM (pulse-width modulation) power control and management devices provide designers with a highly integrated circuit architecture and the flexibility to configure system power-supply parameters in a matter of minutes using an intuitive GUI (graphical user interface). Power design egnineers with no prior programming experience can use the GUI to monitor and quickly adjust power functions such as frequency, timing, voltage settings, and protection limits.

  • Power Tools Power Tools
    Power Tools

    View all tools available for Analog Devices' Power Management products.

  • Product Search Product Search
    Product Search

    Search, compare and select products using our parametric selection tables.

Isolation Amplifiers

Part# # Ports/ChSupply Voltage (V)Supply CurrentGainBandwidth G = 1 (kHz)Insulation Rating (kVrms)
AD215215V40mA1 to 100120KHz1.5KV rms
AD2082--1 to 10004KHz1.5KV rms
AD203215V20mA1 to 1010KHz1.5KV rms
AD210315V50mA1 to 10020KHz2.5KV rms
AD202215V5mA1 to 1005KHz1.5KV rms
AD2042--1 to 1005KHz1.5KV rms
back to top
Send Feedback X
content here.
content here.

Send Feedback

Close