content here.
content here.

RF/IF Components

Using a unique combination of design skills, systems understanding, and process technologies, Analog Devices is the only single-source provider of RF ICs for all major RF-to-digital functional building blocks. Complemented by a full suite of design tools, these RF function blocks include direct digital synthesizers, PLLs, Logarithmic amplifiers and TruPwr™ RMS power detectors a range of RF/IF amplifiers including VGAs (variable gain amplifiers), LNAs (low-noise amplifiers), IF Amps, Driver Amps, RF/IF mixers, and quadrature modulators and demodulator products. The product portfolio also offers high-performance integrated solutions such as ISM band transceivers, and space-saving integrated modulators, demodulators, and PLL/VCOs. Analog Devices brings you products and solutions high-performance cost savings in any radio architecture, air interface standard, or RF application.

  • RF/IF Components Design Tools

NEWS

NEW PRODUCTS

  • ADL5801- High IP3, 10 MHz to 6 GHz, Active Mixer

    The ADL5801 uses a high linearity, doubly balanced, active mixer core with integrated LO buffer amplifier to provide high dynamic range frequency conversion from 10 MHz to 6 GHz. The mixer benefits from a proprietary linearization architecture that provides enhanced input IP3 performance when subject to high input levels. A bias adjust feature allows the input linearity, SSB noise figure, and dc MoreRead more

    ADL5801 Diagram
  • ADRF6655- Broadband Up/Downconverting Mixer with Integrated Fractional-N PLL and VCO

    The ADRF6655 is a high dynamic range active mixer with integrated PLL and VCO. The synthesizer uses a programmable integer-N/fractional-N PLL to generate a local oscillator input to the mixer. The PLL reference input is nominally 20 MHz. The reference input can be divided by or multiplied by and then applied to the PLL phase detector. The PLL can support input reference frequencies from 10 MHz to MoreRead more

    ADRF6655 Diagram
  • AD6659- 12-Bit, 80 MSPS, 1.8 V Baseband Diversity Receiver

    The AD6659 is a mixed-signal, dual-channel baseband receiver supporting radio topologies requiring two receiver signal paths, such as in main/diversity or direct conversion. This communi-cations systems processor consists of two high performance analog-to-digital converters (ADCs) and noise shaping requantizer (NSR) digital blocks. It is designed to support various commu-nications applications MoreRead more

    Functional Block Diagram for AD6659
  • ADRF6602- 1550 MHz to 2150 MHz Rx Mixer with Integrated Fractional-N PLL and VCO

    The ADRF6602 is a high dynamic range active mixer with integrated phase-locked loop (PLL) and voltage-controlled oscillator (VCO). The PLL/synthesizer uses a fractional-N PLL to generate an fLO input to the mixer. The reference input can be divided or multiplied and then applied to the PLL phase frequency detector (PFD).

    The PLL can support input reference frequencies from 12 MHz to 160 MoreRead more

    Functional Block Diagram for ADRF6602
  • More...

Tools and Training

  • ADIsimRF: ADIsimRF is an easy-to-use RF signal chain calculator.
  • ADIsimPLL: PLL Design and Simulation Tool
  • ADIsimSRD: Simplifies Design of Short-Range Wireless Devices with free ADIsimSRD Design Studio
  • RF Webinar: Differential circuit design techniques for communication applications