ADE7754

Poly Phase Multi-functional Metering IC With Serial Port
Manufactured by:

Product Details

The ADE7754 is the electricity industry's first digitally calibrated, multi-function energy measurement IC programmable for all types of 3-phase grid configurations. This single chip solution measures active and apparent energy and provides a serial port interface and a pulse output. The ADE7754 transducer interface uses three fully differential current inputs and three single-ended voltage inputs. The six ADC’s digitize the signals so that all signal processing is done in the digital domain for superior stability and accuracy. The ADE7754 includes reference circuitry, temperature sensor, and all the signal processing required to perform active and apparent energy measurement as well as RMS calculation on all current and voltage channels. Additional power quality measurements are included.

The ADE7754 surpasses the IEC61036/60687 accuracy requirements and provides an SPI interface for digital calibration and reading register data.

The ADE7754 is available in 24-lead SOIC package.

NOTE: If your application requires the measurement of reactive energy and information per phase, the ADE7758 is recommended.

Product Lifecycle

checked Production

At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.

Evaluation Kits

X +

Product Details

This documentation describes the ADE7754 evaluation kit Hardware and Software functionality. The evaluation board (watt-hour meter) is configured via the parallel port of a PC. The data interface     between the evaluation board and the PC is fully isolated. Windows™ based software is provided with the evaluation board which allows it to be quickly configured as an energy meter.


The ADE7754/ADE7758 evaluation board and this documentation, together with the ADE7754 data sheet, provide a complete evaluation platform for the ADE7754. The ADE7754 evaluation board can be configured by setting jumpers.


The evaluation board has been designed so that the ADE7754 can be evaluated in the end application, i.e., Watt-Hour Meter. Using the appropriate transducers on the current channel (e.g., CT) the evaluation board can be connected to a test bench or high voltage (240 V rms) test circuit. On-board resistor dividers networks provide the attenuation for the line voltages. This application note also describes how the current transducers should be connected for the best performance. The evaluation board requires two external 5 V power supplies (one is required for isolation purposes) and the appropriate current transducers.

Documentation

X +

Reference Materials

X +

Design Resources

X +

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

ADE7754 Material Declaration
PCN-PDN Information Quality And Reliability Symbols and Footprints

Reviews

X+

Overview

2 Reviews
2 out of 2 (100%) customers recommend this product.
Quality
1
2
3
4
5
Reliability
1
2
3
4
5
Features
1
2
3
4
5

Most Helpful Review

by Anonymous
Currently working on harmonics and interharmonics measurement of low-voltage substations, if developed a device to evolve interharmonics how to measure electricity

Most Recent Review

by Anonymous
Possibly, a re-sync method for use where SPI has no CS line, say a 3 or 4- 0xff bytes send consecutively

All Reviews

by Anonymous, 3 Feb 13
chip works correctly, just a bit cumbersome to master but it's ok in the end!
Possibly, a re-sync method for use where SPI has no CS line, say a 3 or 4- 0xff bytes send consecutively
Was this Helpful?Helpful(0)
by Anonymous, 22 Dec 12
Samples are delivered in excellent condition and I can clearly define what technological developments require to applied projects requested by UAQ
Currently working on harmonics and interharmonics measurement of low-voltage substations, if developed a device to evolve interharmonics how to measure electricity
Was this Helpful?Helpful(0)

Sample & Buy

X+
Back
Check Inventory

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.


Price Table Help

 
Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.