Add to Signal Chain Designer

ADE7754:  Poly Phase Multi-functional Metering IC With Serial Port

Product Details

The ADE7754 is the electricity industry's first digitally calibrated, multi-function energy measurement IC programmable for all types of 3-phase grid configurations. This single chip solution measures active and apparent energy and provides a serial port interface and a pulse output. The ADE7754 transducer interface uses three fully differential current inputs and three single-ended voltage inputs. The six ADC’s digitize the signals so that all signal processing is done in the digital domain for superior stability and accuracy. The ADE7754 includes reference circuitry, temperature sensor, and all the signal processing required to perform active and apparent energy measurement as well as RMS calculation on all current and voltage channels. Additional power quality measurements are included.

The ADE7754 surpasses the IEC61036/60687 accuracy requirements and provides an SPI interface for digital calibration and reading register data.

The ADE7754 is available in 24-lead SOIC package.

NOTE: If your application requires the measurement of reactive energy and information per phase, the ADE7758 is recommended.


  • Exceeds IEC61036/60687
  • Less than 0.1% error in Active Energy over dynamic range of 1000:1
  • Active and Apparent Energy, Vrmsand Irms measurements
  • High Frequency pulse output
  • Voltage SAG and Zero-crossing,
    Current and Voltage Peak,
    Reverse Active Power,
    Frequency/Period Measurement
  • On chip Temperature Sensor and Voltage Reference (2.4 V)
  • Low Power (50 mW typical)

Functional Block Diagram for ADE7754


Title Content Type File Type
ADE7754: Polyphase Multifunction Energy Metering IC With Serial Port Data Sheet  (Rev 0, 05/2003) (pdf, 711 kB) Data Sheets PDF
AN-1334: Impact of Adding a Neutral Attenuation Network in a 3P4W Wye System  (pdf, 316 kB) Application Notes PDF
AN-639: Frequently Asked Questions (FAQs) Analog Devices Energy (ADE) Products  (pdf, 165 kB) Application Notes PDF
AN-624: Calibration of a 3-Phase Energy Meter Board on the ADE7754  (pdf, 551 kB)
The document describes how to implement the calibration of a polyphase meter based on the ADE7754 energy metering IC.
  • Software Download  (zip, 12533 kB)
    This program controls and reads data from the Analog Devices ADE7754 Polyphase energy metering IC to perform the calibration of a three-phase energy meter. It is designed for use with the EVAL-ADE7754EB (evaluation board). Use it in conjunction with Application note AN-624. (zip, 12,834,788 bytes)
Application Notes PDF
Meter Architecture Trade-offs  (pdf, 1056 kB)
Single-Chip versus Multi-Chip Solutions and Examples of Implementation with Single-Chip Metering IC (Watt-Only and Multi-Function)
Recommended Reading PDF
Meter Background
  • Power Theory  (pdf, 386 kB)
    Definition Of Power/Energy, Power Calculations and Theory Behind ADE775x Power Calculations
  • Meter Configurations  (pdf, 888 kB)
    Wiring Standards, Tampering/Anti-Tampering Connections, Single Phase Stepper Motor and Microprocessor-Based Meters
  • Current Sensors  (pdf, 950 kB)
  • PCB Design  (pdf, 1603 kB)
Recommended Reading HTML
Electrical World Recommended Reading HTML
Utility Automation Magazine Recommended Reading HTML
Power Engineering Recommended Reading HTML
Independent Energy Online Recommended Reading HTML
Utility Products Showcase Recommended Reading HTML
PCIM Power Electronic Systems Recommended Reading HTML
Sensors World Link Recommended Reading HTML
Metering International Recommended Reading HTML
All-Electronic Power and Energy Meters
(Analog Dialogue, Vol. 33, No. 2, February, 1999)
Analog Dialogue HTML
Smart Metering Technology Promotes Energy Efficiency for a Greener World
Analog Dialogue, Volume 43 – January 2009
Analog Dialogue HTML
Measuring Harmonic Energy with a Solid State Energy Meter  (pdf, 46 kB)
(Reprinted with permission from Metering International where it was first printed in Issue 3, 2003)
Technical Articles PDF
IC Technology and Failure Mechanisms - Understanding Reliability Standards Can Raise Quality of Meters  (pdf, 903 kB)
by Etienne Moulin, Analog Devices, Inc. (Reprinted with permission of India's Power Magazine, PowerLine, where it first appeared in the June 2004 issue)
Technical Articles PDF
RF Meets Power Lines: Designing Intelligent Smart Grid Systems that Promote Energy Efficiency
RF DesignLine, March 2010
Technical Articles HTML
Smart Metering Technology Promotes Energy Efficiency for a Greener World
Analog Dialogue, Volume 43 – January 2009
Technical Articles HTML
Digital Energy Meters by the Millions  (pdf, 85 kB)
by Paul Daigle, Analog Devices, Inc.
(Reprinted with permission of Utility Automation, where it was first published in 4/2000)
Technical Articles PDF
green-techZONE Reviews the ADE7754  (htm)
... With the addition of the ADE7754 to Analog Devices' Energy IC (ADE) family, meter manufacturers now have a single chip solution to meet the demands of the high-end three-phase, multi-function electricity metering market.
(green-techZONE, 11/11/2002)
Technical Articles HTM
Trusting Integrated Circuits in Metering Applications  (pdf, 15 kB)
by Jared Jones, Analog Devices, Inc. (Published by and reprinted with permission of Metering International. The Chinese version of this article is published in the February 2003 Metering International, China Special Edition.)
Technical Articles PDF
Tapping The Potential Of Electronic Energy Metering  (pdf, 63 kB)
by Rachel Kaplan, Analog Devices, Inc. ... Today's homes seem more modern than ever, with knobs and dials re-placed by buttons and digital displays. But outside, electricity meters use electromechanical Ferraris technology developed 100 years ago.
(The article originally appeared in Electronic Design's November 25, 2002 Analog & Power Vision Supplement)
Technical Articles PDF
Solid State Solutions For Electricity Metrology  (pdf, 67 kB)
Significant changes are taking place in the electric energy industry worldwide. Deregulation of the utilities will produce a tougher competitive environment for the suppliers of electricity. Increased demand for electrical energy will require better management of distribution. Suppliers will need to identify ways of supplying a better level of service at a reduced cost. One way to do this is to install a solid state electricity meter.
Technical Articles PDF
How Solid Is Your Solid-State Energy Meter? Not All Ics Are Created Equal.  (pdf, 206 kB)
(Reprinted with permission from Metering International where it was first printed in Issue 4, 2000)
Technical Articles PDF
Measuring Reactive Power in Energy Meters  (pdf, 425 kB)
(Reprinted with permission from Metering International where it first appeared in Issue 1, 2002)
Technical Articles PDF
American Council for an Energy-Efficient Economy Associations & Standards HTML
Utility Industry Group Associations & Standards HTML
International Engineering Consortium Associations & Standards HTML
Electric Power Research Institute Associations & Standards HTML
Energy Information Administration Associations & Standards HTML
Energy Efficient and Renewable Energy Network Associations & Standards HTML
Edison Electric Institute Associations & Standards HTML
American Public Power Association Associations & Standards HTML
The Energy Foundation Associations & Standards HTML
New South Wales Wholesale State Electricity Market Associations & Standards HTML
National Electrical Mfg Assoc. Associations & Standards HTML
California Public Utilities Commission Associations & Standards HTML
I.E.E.E Power Engineering Society Associations & Standards HTML
The Business Council for Sustainable Energy Associations & Standards HTML
U.S. Department of Energy's Home Page Associations & Standards HTML
American National Standards Institute Associations & Standards HTML
United Telecom Council Associations & Standards HTML
National Association of Regulatory Utility Commissioners Associations & Standards HTML
Energy Meter Chips
(Components in Electronics, 11/2006)
Product Reviews HTML
The Hot 100 products of 2006
(EDN, 12/15/2006)
Product Reviews HTML
Energy Measurement Solutions  (pdf, 2002 kB) Overview PDF
ADE Product Family Overview  (pdf, 1390 kB)
The portfolio includes single-phase products and polyphase products for stepper motor and LCD display meter designs, with five critical measurements available: watt, V rms, I rms, VA, and VAR.
Overview PDF
Metering IC at ADI - Product Features
  • ADE7752  (pdf, 730 kB)
    Detailed Description of ADE7752 from Block Diagram to Key Specifications
  • ADE7753  (pdf, 500 kB)
    Detailed Description of ADE7753 from Block Diagram to Key Specifications
  • ADE7754  (pdf, 912 kB)
    Detailed Description of ADE7754 from Block Diagram to Key Specifications
  • ADE7756  (pdf, 1252 kB)
    Detailed Description of ADE7756 from Block Diagram to Key Specifications
  • ADE7758  (pdf, 1185 kB)
    Detailed Description of ADE7758 from Block Diagram to Key Specifications
  • ADE7759  (pdf, 416 kB)
    Detailed Description of ADE7759 from Block Diagram to Key Specifications
Overview HTML
What are the benefits of the ADE energy metering devices? FAQs/RAQs HTML
Frequently Asked Questions (FAQs): Analog Devices Energy (ADE) Products  (pdf, 656 kB) FAQs/RAQs PDF
RAQs index Rarely Asked Questions HTML
Glossary of EE Terms Glossary HTML

Evaluation Kits & Symbols & Footprints

Evaluation Boards & KitsView the Evaluation Boards and Kits page for documentation and purchasing

Symbols and Footprints— Analog Devices offers Symbols & Footprints which are compatible with a large set of today’s CAD systems for broader and easier support.

SampleSample & Buy

Price, packaging, availability

ADE7754 Model Options
Model Package Pins Temp.
Price*(100-499) Price*1000 pcs RoHS View PCN/ PDN Check Inventory/
ADE7754ARZ Status: Production 24 ld SOIC - Wide 24 Ind Tube, 31 $5.61 $5.61 Y  Material Info PCN Purchase Sample
ADE7754ARZRL Status: Production 24 ld SOIC - Wide 24 Ind Reel, 1000 - $5.61 Y  Material Info PCN Purchase
Price Table Help

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

ADE7754 Evaluation Board
Model Description Price RoHS View PCN/ PDN Check Inventory/
EVAL-ADE7754EBZ Status: Production Evaluation Board $253.00 Yes -

Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.

Check Inventory & Purchase

View Sales and Distribution Offices

content here.
content here.

Review this Product