AD8011: 300 MHz, 1 mA Current Feedback Amplifier
The AD8011 is a very low power, high speed amplifier designed to operate on +5 V or ±5 V supplies. With wide bandwidth, low distortion and low power, this device is ideal as a general purpose ...More
AD8011: 300 MHz, 1 mA Current Feedback Amplifier
Product Description
The AD8011 is a very low power, high speed amplifier designed to operate on +5 V or ±5 V supplies. With wide bandwidth, low distortion and low power, this device is ideal as a general purpose amplifier. It also can be used to replace high speed amplifiers consuming more power. The AD8011 is a current feed-back amplifier and features gain flatness of 0.1 dB to 25 MHz while offering differential gain and phase error of 0.02% and 0.06° on a single 5 V supply. This makes the AD8011 ideal for professional video electronics such as cameras, video switchers or any high speed portable equipment. Additionally, the AD8011's low distortion and fast settling make it ideal for buffering high speed 8-, 10-, 12-bit A-to-D converters.
The AD8011 offers very low power of 1 mA max and can run on single 5 V to 12 V supplies. All this is offered in a small 8-pin PDIP or 8-pin SOIC package. These features fit well with portable and battery powered applications where size and power are critical.
The AD8011 is available in the industrial temperature range of -40°C to +85°C.
An evaluation board is available for this product and may be ordered using the following product number: AD8011-EB. Schematic and layout for this evaluation board is contained in the product datasheet.
Features
- Easy to Use
Low Power
1 mA Power Supply Current (5 mW on 5 Vs) - High Speed and Fast Settling on 5 V
300 MHz, -3 dB Bandwidth (G = +1)
180 MHz, -3 dB Bandwidth (G = +2)
2000 V/µs Slew Rate
29 ns Settling Time to 0.1% - Single Supply Operation
Fully Specified for 5 V Supply
- Good Video Specifications
(RL = 1 kΩ, G = +2)
Gain Flatness 0.1 dB to 25 MHz
0.02% Differential Gain Error
0.06° Differential Phase Error - Low Distortion
-70 dBc Worst Harmonic @ 5 MHz
-62 dBc Worst Harmonic @ 20 MHz
Diagrams
- Enlarge
- Symbols and Footprints
Pin Configuration Diagram for AD8011
300 MHz, 1 mA Current Feedback Amplifier
Pin Configuration Diagram for AD8011
ADA4898-1 - High Voltage, Low Noise, Low Distortion, Unity Gain Stable, High Speed Op Amp
AD8508 - Quad 20 μA Maximum, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier
ADA4505-2 - Dual 10 μA, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier
ADA4857-2 - Ultralow Distortion, Low Power, Low Noise, High Speed Op Amp
| Part# | Small Signal Bandwidth | Slew Rate | Vos | Ib | V Noise Density | Amplifiers Per Package | Widest Temp Range (°C) |
|---|---|---|---|---|---|---|---|
| AD8011 | 400MHz | 3.5KV/µs | 2mV | 5µA | 2nV/rtHz | 1 | -40 to +85 |
| AD8014 | 400MHz | 4KV/µs | 2mV | 5µA | 3.5nV/rtHz | 1 | -40 to +85 |
| AD797 | 8MHz | 20V/µs | 25µV | 250nA | 900pV/rtHz | 1 | -40 to +85 |
| AD8001 | 880MHz | 1KV/µs | 2mV | 3µA | 2nV/rtHz | 1 | -40 to +85 |
| AD8099 | 500MHz | 1.6KV/µs | 200µV | 3µA | 950pV/rtHz | 1 | -40 to +125 |
| AD811 | 140MHz | 2.5KV/µs | 500µV | 2µA | 1.9nV/rtHz | 1 | -55 to +125 |
| AD8000 | 1.58GHz | 4.1KV/µs | 1mV | 5µA | 1.6nV/rtHz | 1 | -40 to +125 |