MAXQ612
16-Bit Microcontrollers with Infrared Module and Optional USB
Show More
Microcontrollers with Integrated Transceiver Reduce Overall Power Consumption of System and Increase Battery Life
Not the part you were looking for?
Ask a Question
Submit your question below and we will return the best answer from ADI’s knowledge database:
Search
Other places you can find help
Support
Analog Devices Support Portal is a one-stop shop to answer all your ADI questions.
Visit the ADI Support Page
Features
- High-Performance, Low-Power, 16-Bit RISC Core
- DC to 12MHz Operation Across Entire Operating Range
- 1.70V to 3.6V Operating Voltage
- Can Be Powered from Battery (VDD) or USB (VDDB)
- 33 Total Instructions for Simplified Programming
- Three Independent Data Pointers Accelerate Data Movement with Automatic Increment/Decrement
- Dedicated Pointer for Direct Read from Code Space
- 16-Bit Instruction Word, 16-Bit Data Bus
- 16 x 16-Bit General-Purpose Working Registers
- Secure MMU for Application Partitioning and IP Protection
- Memory Features
- 128KB Flash Memory
- 512-Byte Sectors
- 20,000 Erase/Write Cycles per Sector
- 6KB Data SRAM
- 128KB Flash Memory
- USB Features (MAXQ622 Only)
- USB 2.0 Full-Speed Compatible
- Hardware Receive and Transmit Buffers for High Throughput
- Integrated Full-Speed Transceiver
- On-Chip Termination and Pullup Resistors
- Additional Peripherals
- Power-Fail Warning
- Power-On Reset (POR)/Brownout Reset
- Automatic IR Carrier Frequency Generation and Modulation
- Two 16-Bit Programmable Timers/Counters with Prescaler and Capture/Compare
- Two SPI Communication Ports
- Two USART Communication Ports
- I²C Port
- Programmable Watchdog Timer
- 8kHz Nanopower Ring Oscillator Wake-Up Timer
- Up to 56 General-Purpose I/O
- Low Power Consumption
- 0.3µA (typ), 3µA (max) in Stop Mode
- TA = +25°C, Power-Fail Monitor Disabled
- 4.8mA (typ) at 12MHz, 520µA (typ) at 1MHz in Active Mode
- 0.3µA (typ), 3µA (max) in Stop Mode
.svg?rev=fd385c90e2cf4716ae9a8c8d20e6b8e3&la=en&h=24&w=24&hash=A302DF48F94BAAA11877AF223F27157A){kind=icon}
The MAXQ612/MAXQ622 are low-power, 16-bit MAXQ® microcontrollers designed for low-power applications including universal remote controls, consumer electronics, and white goods. Both devices use a low-power, high-throughput, 16-bit RISC microcontroller. Serial peripherals include two universal synchronous/asynchronous receiver-transmitters (USARTs), two SPI™ master/slave communications ports, and an inter-integrated circuit (I²C) bus. The devices also incorporate an IR module with carrier frequency generation and flexible port I/O capable of multiplexed keypad control. The MAXQ622 adds a universal serial bus (USB) with integrated physical interface (PHY).
The MAXQ612/MAXQ622 include 128KB of flash memory and 6KB of data SRAM. Intellectual property (IP) protection is provided by a secure memory management unit (MMU) that supports multiple application privilege levels and protects code against copying and reverse engineering. Privilege levels enable vendors to provide libraries and applications to execute on the MAXQ612/MAXQ622, while limiting access to only data and code allowed by their privilege level.
For the ultimate in low-power battery-operated performance, the devices include an ultra-low-power stop mode (0.3µA typical). In this mode, the minimum amount of circuitry is powered. Wake-up sources include external interrupts, the power-fail interrupt, and a timer interrupt. The microcontroller runs from a wide operating voltage of 1.70V to 3.6V, and can also be powered from the USB.
Designers must have the following documents to fully use all the features of this device. The data sheet contains pin descriptions, feature overviews, and electrical specifications. Errata sheets contain deviations from published specifications. The user's guides offer detailed information about device features and operation.
- MAXQ612/MAXQ622 IC data sheet
- MAXQ612/MAXQ622 revision-specific errata sheet (Click here for availability)
- MAXQ612/MAXQ622 User's Guide
Applications
- Battery-Powered Portable Equipment
- Consumer Electronics
- Home Appliances
- Remote Controls
- White Goods
Ask a Question
Submit your question below and we will return the best answer from ADI’s knowledge database:
Search
Other places you can find help
Support
Analog Devices Support Portal is a one-stop shop to answer all your ADI questions.
Visit the ADI Support Page
{{modalTitle}}
{{modalDescription}}
{{dropdownTitle}}
- {{defaultSelectedText}} {{#each projectNames}}
- {{name}} {{/each}} {{#if newProjectText}}
-
{{newProjectText}}
{{/if}}
{{newProjectTitle}}
{{projectNameErrorText}}
MAXQ612
Documentation
Filters
1 Applied
-
All
-
Data Sheet
-
Reliability Data
-
User Guide
-
All
-
English
Data Sheet
1
MAXQ612-MAXQ622: 16-Bit Microcontrollers with Infrared Module and Optional USB Data Sheet (Rev.2)
Reliability Data
1
20.18K
User Guide
2
Documentation
Software & Part Ecosystem
| Parts | Product Life Cycle | Description | ||
|---|---|---|---|---|
|
Microcontrollers1 |
||||
|
PRODUCTION |
16-Bit Microcontroller with Infrared Module |
|||
|
Product2 |
||||
|
|
16-Bit Microcontroller with Infrared Module |
|||
|
|
16-Bit Mixed-Signal Microcontroller with LCD Interface |
|||
|
Ultra Low Power Microcontrollers1 |
||||
|
RECOMMENDED FOR NEW DESIGNS |
Low-Power LCD Microcontroller |
|||
Evaluation Kits 1
MAXQ622-KIT
Evaluation Kit for the MAXQ622
Features and Benefits
- Easily Load and Debug Code Using Supplied USB-to-JTAG Adaptor
- JTAG Interface Provides In-Application Debugging Features
- Step-by-Step Execution Tracing
- Breakpointing by Code Address or Data Memory Address
- Data Memory or Register Content View and Edit
- On-Board 3.3V Voltage Regulator (Powered from 5V Input, JTAG, or USB)
- Eight User-Input Pushbutton Switches
- USB Mini-B Connector Provides Access to MAXQ622 USB Interface and Transceiver
- Prototyping Area
- Included Board Schematics Provide a Convenient Reference Design
Product Detail
The MAXQ622 evaluation kit (EV kit) provides a proven platform for conveniently evaluating the capabilities of the MAXQ622 low-power, 16-bit, RISC microcontroller with USB interface targeted for battery-powered applications. The EV kit includes the MAXQ622 EV kit board, which contains infrared (IR) transmit and receive devices, a USB Mini-B interface, headers providing access to the processor's I/O port pins, a single 5V power-supply input, and a bank of eight pushbutton switches for user input. With the included software, USB-to-JTAG adaptor, and a USB cable connected to a personal computer, the EV kit provides a complete, functional system ideal for developing and debugging applications as well as evaluating the overall capabilities of the MAXQ622 RISC processor.
Applications
- Battery-Powered Portable Equipment
- Consumer Electronics
- Home Appliances
- Remote Controls
- White Goods
Resources
