LT5502

PRODUCTION

400MHz Quadrature IF Demodulator with RSSI

Viewing:

Overview

  • Single 1.8V to 5.25V Supply
  • IF Frequency Range: 70MHz to 400MHz
  • 84dB Limiting IF Gain
  • 90dB Linear RSSI Range
  • 7.7MHz Lowpass Output Filter
  • Baseband I/Q Amplitude Imbalance: <0.7dB
  • 4dB Noise Figure
  • Low Supply Current: 25mA
  • Outputs Biased Up While in Standby
  • Shutdown Current: 1µA
  • 24-Lead Narrow SSOP Package

The LT5502 is a 70MHz to 400MHz monolithic integrated quadrature IF demodulator. It consists of an IF limiter, quadrature down mixers, integrated lowpass filters, and divide-by-two LO buffers. The demodulator provides all building blocks for demodulation of I and Q baseband signals with a single supply voltage of 1.8V to 5.25V. The IF limiter has 84dB small-signal gain, and a built-in receive signal strength indicator (RSSI) with over 90dB linear range. The input referred noise-spectral-density is 1.45nV/√Hz, which is equivalent to a 4dB noise figure when the input is terminated with a 50Ω source. The integrated lowpass output filters act as antialiasing and pulse-shaping filters for demodulated I/Q-baseband signals. The 3dB cutoff frequency of the filters is about 7.7MHz. The VCO frequency is required to be twice the desired operating frequency to provide quadrature local oscillator (LO) signals to the mixers. The standby mode provides fast transient response to the receive mode with reduced supply current when the I/Q outputs are AC-coupled to a baseband chip.

Applications

  • IEEE802.11
  • High Speed Wireless LAN
  • Wireless Local Loop

LT5502
400MHz Quadrature IF Demodulator with RSSI
I/Q Output Swing, RSSI Output vs IF Input Power Product Package 1
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Hardware Ecosystem

Parts Product Life Cycle Description
LT5506 PRODUCTION 40MHz to 500MHz Quadrature Demodulator with VGA
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Tools & Simulations

ADIsimRF

ADIsimRF is an easy-to-use RF signal chain calculator. Cascaded gain, noise, distortion and power consumption can be calculated, plotted and exported for signal chains with up to 50 stages. ADIsimRF also includes an extensive data base of device models for ADI’s RF and mixed signal components.

Open Tool

Evaluation Kits

eval board
DC333A-B

LT5502EGN Demo Board | 400MHz IF Receiver with Limiting Amplifier and I/Q Demodulator with RSSI

Product Details

DC333A-B: Demo Board for the LT5502 400MHz Quadrature IF Demodulator with RSSI.

eval board
DC333A-A

LT5502EGN Demo Board | 400MHz IF Receiver with Limiting Amplifier and I/Q Demodulator

Product Details

DC333A-A: Demo Board for the LT5502 400MHz Quadrature IF Demodulator with RSSI.

DC333A-B
LT5502EGN Demo Board | 400MHz IF Receiver with Limiting Amplifier and I/Q Demodulator with RSSI
DC333A-A - Schematic
DC333A-A
LT5502EGN Demo Board | 400MHz IF Receiver with Limiting Amplifier and I/Q Demodulator
DC333A-A - Schematic

Latest Discussions

Recently Viewed