LT4363

RECOMMENDED FOR NEW DESIGNS

High Voltage Surge Stopper with Current Limit

Data Sheet (Rev. C) Product Selection Table
Viewing:

Overview

  • Withstands Surges Over 80V with VCC Clamp
  • Wide Operating Voltage Range: 4V to 80V
  • Adjustable Output Clamp Voltage
  • Fast Overcurrent Limit: Less Than 5μs
  • Reverse Input Protection to –60V
  • Adjustable UV/OV Comparator Thresholds
  • Low 7μA Shutdown Current
  • Shutdown Pin Withstands –60V to 100V
  • Adjustable Fault Timer
  • Controls N-Channel MOSFET
  • Less Than 1% Retry Duty Cycle During Faults, LT4363-2
  • Available in 12-Pin (4mm × 3mm) DFN, 12-Pin MSOP or 16-Pin SO Packages
LT4363
High Voltage Surge Stopper with Current Limit
Product Package 1 Product Package 2 Product Package 3 Product Package 4 Product Package 5 Product Package 6
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

User Guide 3

Technical Articles 3

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Hardware Ecosystem

Parts Product Life Cycle Description
Ideal Diodes and PowerPath Controllers 1
LTC4359
RECOMMENDED FOR NEW DESIGNS Ideal Diode Controller with Reverse Input Protection
Overvoltage & Overcurrent Protectors 1
LTC4367
RECOMMENDED FOR NEW DESIGNS 100V Overvoltage, Undervoltage and Reverse Supply Protection Controller
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Tools & Simulations

LTspice 1

Models for the following parts are available in LTspice:

  • LT4363-1
  • LT4363-2
LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

Evaluation Kits

eval board
schematic 1
schematic 2
schematic 3
schematic 4
schematic 5
DC2062A-B

LT4363IDE-2 Demo Board: 12V System ISO-7637-2 Surge Stopper, Auto-Retry Version

Buy Now View Details

Product Details

DC2062A-B: Demo Board for LT4363 High Voltage Surge Stopper with Current Limit.

eval board
schematic 6
schematic 7
schematic 8
schematic 9
schematic 10
DC2062A-B

LT4363IDE-2 Demo Board: 12V System ISO-7637-2 Surge Stopper, Auto-Retry Version

Buy Now View Details

Product Details

DC2062A-B: Demo Board for LT4363 High Voltage Surge Stopper with Current Limit.

eval board
schematic 11
schematic 12
schematic 13
schematic 14
schematic 15
DC2150A-C

28V, 5A MIL-STD-1275D Surge Stopper (Featuring LTC4366HTS8-2 and LT4363HS-2)

Buy Now View Details

Product Details

Demonstration circuit 2150A uses the LTC4366-2 and LT4363-2 surge stoppers to satisfy MIL-STD-1275D. This specification, created by the United States Department of Defense, sets down requirements of electrical systems powered from a military vehicle’s 28V power supply. DC2150A’s output voltage is limited to 44V when faced with MIL-STD-1275D’s onerous surge, spike, and ripple conditions. In most circumstances, satisfying MIL-STD-1275D is as simple as placing this circuit in front of a 44V tolerant device. The default version, DC2150A-C, provides a minimum of 4A to the output in all conditions except the ±7V ripple condition (14Vpeak-to-peak). During the ripple condition, DC2150A-C provides a minimum of 2.8A to the load. Exceeding 2.8A during the input ripple condition may cause DC2150A-C to timeout and shutoff in less than MIL-STD-1275D’s one minute ripple ride-through requirement.

eval board
schematic 16
schematic 17
schematic 18
schematic 19
schematic 20
DC2150A-C

28V, 5A MIL-STD-1275D Surge Stopper (Featuring LTC4366HTS8-2 and LT4363HS-2)

Buy Now View Details

Product Details

Demonstration circuit 2150A uses the LTC4366-2 and LT4363-2 surge stoppers to satisfy MIL-STD-1275D. This specification, created by the United States Department of Defense, sets down requirements of electrical systems powered from a military vehicle’s 28V power supply. DC2150A’s output voltage is limited to 44V when faced with MIL-STD-1275D’s onerous surge, spike, and ripple conditions. In most circumstances, satisfying MIL-STD-1275D is as simple as placing this circuit in front of a 44V tolerant device. The default version, DC2150A-C, provides a minimum of 4A to the output in all conditions except the ±7V ripple condition (14Vpeak-to-peak). During the ripple condition, DC2150A-C provides a minimum of 2.8A to the load. Exceeding 2.8A during the input ripple condition may cause DC2150A-C to timeout and shutoff in less than MIL-STD-1275D’s one minute ripple ride-through requirement.

eval board
schematic 21
schematic 22
schematic 23
schematic 24
schematic 25
DC1935A-A

LT4363-1 Demo Board: High Voltage Surge Stopper with Current Limit, Latch-Off Version

Buy Now View Details

Product Details

DC1935A-A: Demo Board for the LT4363 High Voltage Surge Stopper with Current Limit.


 


eval board
schematic 26
schematic 27
schematic 28
schematic 29
schematic 30
DC1935A-A

LT4363-1 Demo Board: High Voltage Surge Stopper with Current Limit, Latch-Off Version

Buy Now View Details

Product Details

DC1935A-A: Demo Board for the LT4363 High Voltage Surge Stopper with Current Limit.


 


eval board
schematic 31
schematic 32
schematic 33
schematic 34
schematic 35
DC1935A-B

LT4363-2 Demo Board: High Voltage Surge Stopper with Current Limit, Auto-Retry Version

Buy Now View Details

Product Details

DC1935A-B: Demo Board for the LT4363 High Voltage Surge Stopper with Current Limit.


 


eval board
schematic 36
schematic 37
schematic 38
schematic 39
schematic 40
DC1935A-B

LT4363-2 Demo Board: High Voltage Surge Stopper with Current Limit, Auto-Retry Version

Buy Now View Details

Product Details

DC1935A-B: Demo Board for the LT4363 High Voltage Surge Stopper with Current Limit.


 


eval board
schematic 41
DC2062A-A

LT4363IDE-1 Demo Board: 12V System ISO-7637-2 Surge Stopper, Latch-Off Version

Buy Now View Details

Product Details

DC2062A-A: Demo Board for LT4363 High Voltage Surge Stopper with Current Limit.

eval board
schematic 42
DC2062A-A

LT4363IDE-1 Demo Board: 12V System ISO-7637-2 Surge Stopper, Latch-Off Version

Buy Now View Details

Product Details

DC2062A-A: Demo Board for LT4363 High Voltage Surge Stopper with Current Limit.
DC2062A-B
LT4363IDE-2 Demo Board: 12V System ISO-7637-2 Surge Stopper, Auto-Retry Version
DC2062A-B Demo Board DC2062A-B Demo Board DC2062A-B Demo Board DC2062A-B Demo Board DC2062A-A - Schematic
DC2062A-B
LT4363IDE-2 Demo Board: 12V System ISO-7637-2 Surge Stopper, Auto-Retry Version
DC2062A-B Demo Board DC2062A-B Demo Board DC2062A-B Demo Board DC2062A-B Demo Board DC2062A-A - Schematic
DC2150A-C
28V, 5A MIL-STD-1275D Surge Stopper (Featuring LTC4366HTS8-2 and LT4363HS-2)
DC2150A-C Demo Board DC2150A-C Demo Board DC2150A-C Demo Board DC2150A-C Demo Board DC2150A - Schematic
DC2150A-C
28V, 5A MIL-STD-1275D Surge Stopper (Featuring LTC4366HTS8-2 and LT4363HS-2)
DC2150A-C Demo Board DC2150A-C Demo Board DC2150A-C Demo Board DC2150A-C Demo Board DC2150A - Schematic
DC1935A-A
LT4363-1 Demo Board: High Voltage Surge Stopper with Current Limit, Latch-Off Version
DC1935A-A Demo Board DC1935A-A Demo Board DC1935A-A Demo Board DC1935A-A Demo Board DC1935A-A - Schematic
DC1935A-A
LT4363-1 Demo Board: High Voltage Surge Stopper with Current Limit, Latch-Off Version
DC1935A-A Demo Board DC1935A-A Demo Board DC1935A-A Demo Board DC1935A-A Demo Board DC1935A-A - Schematic
DC1935A-B
LT4363-2 Demo Board: High Voltage Surge Stopper with Current Limit, Auto-Retry Version
DC1935A-B Demo Board DC1935A-B Demo Board DC1935A-B Demo Board DC1935A-B Demo Board DC1935A-A - Schematic
DC1935A-B
LT4363-2 Demo Board: High Voltage Surge Stopper with Current Limit, Auto-Retry Version
DC1935A-B Demo Board DC1935A-B Demo Board DC1935A-B Demo Board DC1935A-B Demo Board DC1935A-A - Schematic
DC2062A-A
LT4363IDE-1 Demo Board: 12V System ISO-7637-2 Surge Stopper, Latch-Off Version
DC2062A-A - Schematic
DC2062A-A
LT4363IDE-1 Demo Board: 12V System ISO-7637-2 Surge Stopper, Latch-Off Version
DC2062A-A - Schematic

Latest Discussions

36 Weeks Ago
Solution similar to LT4363-2 but with Undervoltage Fault Detection/Warning
37 Weeks Ago
LT4363-2 MP MS Thermal Resistance Data
1 Years Ago
Parallel FETs with LT4363
View related discussion on EngineerZone®

Recently Viewed