ADMV7315

RECOMMENDED FOR NEW DESIGNS

E-Band, Upconverter SiP, 71GHz to 86GHz

Viewing:

Overview

  • Maximum conversion gain: 42dB
  • Gain tuning range: 32dB minimum
  • PSAT: 30dBm
  • OIP3: 36dBm at total POUT at 20dBm
  • OP1dB: 28dBm
  • Three-wire SPI control for power-up/power-down and bias adjust
  • Multiple envelope/power detectors in signal chain
  • Built-in temperature sensors
  • Independent analog VGA and PA bias adjust
  • Surface-mount, 20mm × 19mm, LGA_CAV package

The ADMV7315 is a fully-integrated, system-in-package (SiP), in-phase/quadrature (I/Q) upconverter that operates over an intermediate frequency (IF) input range of DC to 5GHz and a radio frequency (RF) output range of 71GHz to 86GHz. The device uses an image rejection mixer driven by a 6× local oscillator (LO) multiplier chain. The mixer RF output is followed by a variable gain amplifier (VGA) and two power amplifiers PA_A (PA1) and PA_B (PA2), providing a conversion gain of 42dB typical. A single envelope detector and power detectors are integrated within each variable gain amplifier and PA_B power amplifier to detect power levels and enable a reference for LO nulling. Differential I and Q mixer inputs are provided, and can be driven with differential I and Q baseband waveforms for direct conversion applications. Alternatively, the inputs can be driven using an external 90° hybrid and two external 180° hybrids for single-ended applications.

The ADMV7315 comes in a fully-integrated, surface-mount, 75-terminal, 20mm × 19mm, land-grid array (LGA) package. The ADMV7315 operates over the -40°C to +85°C temperature range.

APPLICATIONS

  • E-band communication systems
  • High-capacity wireless backhauls
  • Satellite feeder link

ADMV7315
E-Band, Upconverter SiP, 71GHz to 86GHz
ADMV7315 Functional Block Diagram ADMV7315 Chip Illustration
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Request an NDA

Complete documentation is available upon completion of a Non-Disclosure Agreement (NDA).

Request an NDA
Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Latest Discussions

No discussions on ADMV7315 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed