OP213

PRODUCTION

Low Noise, Low Drift Single-Supply Operational Amplifiers (Dual)

Data Sheet (Rev. F) Product Selection Table

Part Models: 7
1ku List Price: Starting From $3.77

Viewing:

Overview

Single- or dual-supply operation
Low noise: 4.7 nV/√Hz @ 1 kHz
Wide bandwidth: 3.4 MHz
Low offset voltage: 100 μV

Very low drift: 0.2 μV/°C
Unity gain stable
No phase reversal

The OPx13 family is unity gain stable and has a typical gain bandwidth product of 3.4 MHz. Slew rate is in excess of 1 V/μs. Noise density is a very low 4.7 nV/√Hz, and noise in the 0.1 Hz to 10 Hz band is 120 nV p-p. Input offset voltage is guaranteed and offset drift is guaranteed to be less than 0.8 μV/°C. Input common-mode range includes the negative supply and to within 1 V of the positive supply over the full supply range. Phase reversal protection is designed into the OPx13 family for cases where input voltage range is exceeded. Output voltage swings also include the negative supply and go to within 1 V of the positive rail. The output is capable of sinking and sourcing current throughout its range and is specified with 600 Ω loads.

Digital scales and other strain gage applications benefit from the very low noise and low drift of the OPx13 family. Other applications include use as a buffer or amplifier for both analog-to-digital (ADC) and digital-to-analog (DAC) sigma-delta converters. Often these converters have high resolutions requiring the lowest noise amplifier to utilize their full potential. Many of these converters operate in either single-supply or low-supply voltage systems, and attaining the greater signal swing possible increases system performance.

The OPx13 family is specified for single 5 V and dual ±15 V operation over the XIND—extended industrial temperature range (–40°C to +85°C). They are available in PDIP and SOIC surface-mount packages.

Applications

Digital scales
Multimedia
Strain gages
Battery-powered instrumentation
Temperature transducer amplifier

Part Models: 7
1ku List Price: Starting From $3.77

Documentation

Data Sheet 1

OP113/OP213/OP413: Low Noise, Low Drift Single-Supply Operational Amplifiers Data Sheet (Rev.F) 10/10/2002

Application Note 1

AN-106: A Collection of Amp Applications 02/14/2015

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.

Part Model	Pin/Package Drawing	Documentation	CAD Symbols, Footprints, and 3D Models
OP213ESZ	8-Lead SOIC	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
OP213ESZ-REEL	8-Lead SOIC	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
OP213ESZ-REEL7	8-Lead SOIC	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
OP213FPZ	8-Lead PDIP	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
OP213FSZ	8-Lead SOIC	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
OP213FSZ-REEL	8-Lead SOIC	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
OP213FSZ-REEL7	8-Lead SOIC	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys

Part Models	Product Lifecycle	PCN

Jul 8, 2025 - 25_0087 Qualification of Wafer Fabrication Site at Analog Devices, Inc. Camas for CBCMOS1 Products
		PCN25_0087_Form Material_Report Delta Qualification Matrix Qualification Results Summary
OP213ESZ	PRODUCTION
OP213ESZ-REEL	PRODUCTION
OP213ESZ-REEL7	PRODUCTION
OP213FPZ	PRODUCTION
OP213FSZ	PRODUCTION
OP213FSZ-REEL	PRODUCTION
OP213FSZ-REEL7	PRODUCTION
Nov 9, 2011 - 11_0182 Test Site Transfer from Analog Devices Philippines Inc in Paranaque to Analog Devices General Trias in Cavite, Philippines
		PCN11_0182_Form Material_Report
OP213ESZ	PRODUCTION
OP213ESZ-REEL	PRODUCTION
OP213ESZ-REEL7	PRODUCTION
OP213FPZ	PRODUCTION
Aug 19, 2009 - 07_0024 Package Material Changes for SOT23, MiniSO, MQFP, PDIP, PLCC, SOIC (narrow and wide body), SSOP, TSSOP and TSSOP exposed pad
		Material_Report Material_Report Parts List PCN07_0024_Form Qual Data
OP213FPZ	PRODUCTION

This is the most up-to-date revision of the Data Sheet.

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Tools & Simulations

LTspice

Models for the following parts are available in LTspice:

OP213

Signal Chain Designer

Signal Chain Designer is a web-based tool designed to create and simulate complex precision signal chains. See your circuit’s performance before you commit to your PCB: transfer function, noise, power consumption, input range, and DC error. Quickly experiment with different parts and architectures. Signal chains can be exported to LTspice for further analysis.

Open Tool

Analog Filter Wizard

Use the Analog Filter Wizard to design low-pass, high-pass, or band-pass filters with actual op amps in minutes. As you progress through the design process, you can observe the characteristics of your filter design from ideal specifications to real world circuit behavior. Quickly evaluate the tradeoffs in op amp specifications - including gain-bandwidth, noise, and supply current – to determine the best filter design for your requirements.

Open Tool

Analog Photodiode Wizard

Use Photodiode Wizard to design a transimpedance amplifier circuit to interface with a photodiode. Select a photodiode from the library included in the tool, or enter custom photodiode specifications. Quickly observe tradeoffs between Bandwidth, Peaking (Q), and ENOB/SNR. Modify circuit parameters, and immediately see results in plots for pulse response, frequency response, and noise gain.

Open Tool

OP213 SPICE Macro Models 3

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

Evaluation Kits

EVAL-OPAMP-2 Evaluation Board

Buy Now View Details

Product Details

The universal precision op amp evaluation boards have been designed and optimized for many circuit configurations allowing the users to best suit their applications. These boards are all RoHs compliant. See references below on what board to order by lead count and package.

EVAL-PRAOPAMP-2CPZ (dual 8-lead LFCSP) CP-8
EVAL-PRAOPAMP-2RMZ (dual 8-lead MSOP) RM-8
EVAL-PRAOPAMP-2RZ (dual 8-lead SOIC) R-8

Latest Discussions

2 Years Ago

OP213

Overview

Documentation

Data Sheet 1

Application Note 1

Analog Dialogue 1

Software Resources

Can't find the software or driver you need?

Tools & Simulations

LTspice

Models for the following parts are available in LTspice:

Signal Chain Designer

Analog Filter Wizard

Analog Photodiode Wizard

OP213 SPICE Macro Models 3

Evaluation Kits

Product Details

Latest Discussions

Recently Viewed