LTC2351-14

PRODUCTION

6 Channel, 14-Bit, 1.5Msps Simultaneous Sampling ADC with Shutdown

Data Sheet Product Selection Table
Viewing:

Overview

  • 1.5Msps ADC with Six Simultaneously Sampled Differential Inputs
  • 250ksps Throughput per Channel
  • 75dB SINAD
  • Low Power Dissipation: 16.5mW
  • 3V Single Supply Operation
  • 2.5V Internal Bandgap Reference, Can be Overdriven with External Reference
  • 3-Wire SPI-Compatible Serial Interface
  • Internal Conversion Triggered by CONV
  • Sleep (12µW) Shutdown Mode
  • NAP (4.5mW) Shutdown Mode
  • 0V to 2.5V Unipolar, or ±1.25V Bipolar Differential Input Range
  • 83dB Common Mode Rejection
  • Tiny 32-Pin (5mm × 5mm) QFN Package

The LTC2351-14 is a 14-bit, 1.5Msps ADC with six simultaneously sampled differential inputs. The device draws only 5.5mA from a single 3V supply, and comes in a tiny 32-pin (5mm × 5mm) QFN package. A sleep shutdown mode further reduces power consumption to 12µW. The combination of low power and tiny package makes the LTC2351-14 suitable for portable applications.

The LTC2351-14 contains six separate differential inputs that are sampled simultaneously on the rising edge of the CONV signal. These six sampled inputs are then converted at a rate of 250ksps per channel.

The 83dB common mode rejection allows users to eliminate ground loops and common mode noise by measuring signals differentially from the source.

The device converts 0V to 2.5V unipolar inputs differentially, or ±1.25V bipolar inputs also differentially, depending on the state of the BIP pin. Any analog input may swing rail-to-rail as long as the differential input range is maintained.

The conversion sequence can be abbreviated to convert fewer than six channels, depending on the logic state of the SEL2, SEL1 and SEL0 inputs.

The serial interface sends out the six conversion results in 96 clocks for compatibility with standard serial interfaces.

Bits
LTC2351-12 12
LTC2351-14 14

Applications

  • Multiphase Power Measurement
  • Multiphase Motor Control
  • Data Acquisition Systems
  • Uninterruptable Power Supplies
LTC2351-14
6 Channel, 14-Bit, 1.5Msps Simultaneous Sampling ADC with Shutdown
Product Package 1
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Reliability Data 1

User Guide 1

Design Note 2

Technical Articles 1

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Evaluation Software 1

LinearLab Tools

A collection of Matlab and Python programs that provide direct access to Linear Technology’s data converter evaluation boards.

Hardware Ecosystem

Parts Product Life Cycle Description
Interface Transceivers & Isolators 1
LTM2883
PRODUCTION SPI/Digital or I2C μModule Isolator with Adjustable ±12.5V and 5V Regulated Power
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Evaluation Kits

eval board
schematic 1
DC1278A

LTC2351-14: 14-Bit, 6-Channel 1.5Msps Simultaneous Sampling SAR ADC (requires DC890)

Buy Now View Details

Product Details

DC1278A: Demo Board for LTC2351-14 - 6 Channel, 14-Bit, 1.5Msps Simultaneous Sampling ADC with Shutdown


 
DC1278A
LTC2351-14: 14-Bit, 6-Channel 1.5Msps Simultaneous Sampling SAR ADC (requires DC890)
DC1278A - Schematic

Latest Discussions

No discussions on LTC2351-14 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed