Add to Signal Chain Designer

ADF7023-J:  High Performance, Low Power, ISM Band FSK/GFSK/MSK/GMSK Transceiver IC

Product Details

Product Status:Recommended for New Designs

The ADF7023-J is a very low power, high performance, highly integrated 2FSK/GFSK/MSK/GMSK transceiver designed for operation in the 902 MHz to 958 MHz frequency band, which covers the ARIB Standard T96 band at 950 MHz. Data rates from 1 kbps to 300 kbps are supported.

The transmit RF synthesizer contains a VCO and a low noise fractional-N phase locked loop (PLL) with an output channel frequency resolution of 400 Hz. The VCO operates at twice the fundamental frequency to reduce spurious emissions. The receive and transmit synthesizer bandwidths are automatically, and independently, configured to achieve optimum phase noise, modulation quality, and settling time. The transmitter output power is programmable from −20 dBm to +13.5 dBm, with automatic PA ramping to meet transient spurious specifications. The part possesses both single-ended and differential PAs, which allow for Tx antenna diversity.

The receiver is exceptionally linear, achieving an IP3 specification of −12.2 dBm and −11.5 dBm at maximum gain and minimum gain, respectively, and an IP2 specification of 18.5 dBm and 27 dBm at maximum gain and minimum gain, respectively. The receiver achieves an interference blocking specification of 66 dB at a ±2 MHz offset and 74 dB at a ±10 MHz offset. Thus, the part is extremely resilient to the presence of interferers in spectrally noisy environments. The receiver features a novel, high speed, AFC loop, allowing the PLL to find and correct any RF frequency errors in the recovered packet. A patent pending image rejection calibration scheme is available by downloading the image rejection calibration firmware module to program RAM. The algorithm does not require the use of an external RF source nor does it require any user intervention once initiated. The results of the calibration can be stored in nonvolatile memory for use on subsequent power-ups of the transceiver.

See data sheet for additional information.

Applications

  • Smart metering
  • IEEE 802.15.4g
  • Home automation
  • Process and building control
  • Home Energy Management Systems (HEMS)
  • Wireless sensor networks (WSNs)
  • Wireless healthcare

FEATURES and BENEFITS

  • Ultralow power, high performance transceiver
  • Frequency bands: 902 MHz to 958 MHz
  • Data rates supported: 1 kbps to 300 kbps
  • Flexible firmware programmable system controller and packet processor
  • 2.2 V to 3.6 V power supply
  • Single-ended and differential power amplifiers (PAs)
  • Low IF receiver with programmable IF bandwidths
  • Receiver sensitivity (BER)
  • Very low power consumption
  • RF output power of −20 dBm to +13.5 dBm (single-ended PA)
  • RF output power of −20 dBm to +10 dBm (differential PA)
  • Patented fast settling automatic frequency control (AFC)
  • See data sheet for additional information

Functional Block Diagram for ADF7023-J

3rd party developers information

ADF70xx Third Party Developers
There is a growing list of companies developing a wide range of solutions that support ADI’s ADF70xx products. View the list and learn more about becoming a third party developer.

Documentation

Title Content Type File Type
ADF7023-J: High Performance, Low Power, ISM Band FSK/GFSK/MSK/GMSK Transceiver IC Data Sheet (Rev D, 03/2014) (pdf, 2279 kB) Data Sheets PDF
AN-1276: Embedded Packet Error Rate Testing on the ADF7023 and ADF7023-J  (pdf, 98 kB) Application Notes PDF
Wireless Technologies for Smart Meters: Focus on Water Metering  (pdf, 493 kB) Technical Articles PDF
RF Meets Power Lines: Designing Intelligent Smart Grid Systems that Promote Energy Efficiency
RF DesignLine, March 2010
Technical Articles HTML
Understand Wireless Short-Range Devices for Global License-Free Systems
Short-range devices (SRD) are radio transmitters that communicate unidirectionally or bidirectionally with little capability of interfering with other radio equipment. They provide many different services, including home automation, wireless alarms, and remote keyless entry.
(RF DesignLine, March 07, 2007)
Technical Articles HTML
Wireless Short Range Devices and Narrowband Communications
The term “Short Range Device” (SRD) covers radio transmitters which provide either unidirectional or bi-directional communication and which have a low capability of causing interference to other radio equipment.
(Microwave Product Digest, July, 2007)
Technical Articles HTML
Design, Simulate, and Document Proprietary Wireless Systems
The broad acceptance of standards developed for short range wireless connectivity has been one of the notable features of the semiconductor market in the past few years. The available wireless standards are not always the best fit for the application’s requirements, however.
(Analog Dialogue, Volume 42, Number 4 2008)
Technical Articles HTML
Smart Metering Technology Promotes Energy Efficiency for a Greener World
The metering of electric power coming into the home is going electronic, replacing the long-established electromechanical power-line meter (from the 1890s) with all-electronic smart meters.
(RF DesignLine, July 27, 2009)
Technical Articles HTML
Low Power, Low Cost, Wireless ECG Holter Monitor Technical Articles HTML
Analog Devices and Renesas Wireless Communications Platform Achieves Wi-SUN Alliance Certification (19 Jun 2014) Press Releases HTML
RF Source Booklet  (PDF, 4353 kB)
RF IC Product Overview - Version P (02/2014)
Overview PDF
RF Transceivers for Short Range Devices  (pdf, 2819 kB)
The ADF7000 series of transmitter and transceiver ICs provides high performance, robust, short range wireless connections.
Overview PDF
RAQs index Rarely Asked Questions HTML
Glossary of EE Terms Glossary HTML

Design Tools,Models,Drivers & Software

Title Content Type File Type
ADIsimSRD Design Studio
Analog Devices ADIsimSRD Design Studio is a very powerful tool allowing real-time simulation and optimization of many of the parameters in a typical wireless system using the ADF7xxx family of transceivers and transmitters.
ADIsim Design/Simulation Tools HTML
ADF7023 Evaluation Board Software  (zip, 114081 kB)
This software controls the operation of the ADF7023 and ADF7023-J evaluation boards. Right click on the above link and choose "Save Link As" (Mozilla / Netscape Navigator) or "Save Target As" (Internet Explorer). Once the file "ADF7023 RevX_FULL.exe" has been stored locally, double-click it to install the software.
Evaluation Software ZIP

Evaluation Kits & Symbols & Footprints

Evaluation Boards & KitsView the Evaluation Boards and Kits page for documentation and purchasing

Symbols and Footprints— Analog Devices offers Symbols & Footprints which are compatible with a large set of today’s CAD systems for broader and easier support.

SampleSample & Buy

Price, packaging, availability

Price Table Help

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

ADF7023-J Evaluation Board
Model Description Price RoHS View PCN/ PDN Check Inventory/
Purchase/Sample
EVAL-ADF7XXXMB4Z Status: Contact ADI Mother Board $200.00 Yes -
EVAL-ADF7023-JDB1Z Status: Contact ADI Daughter Board (902 MHz - 958 MHz separate PA and LNA matches) $100.00 Yes -
EVAL-ADF7023-JDB2Z Status: Contact ADI Daughter Board (902 MHz - 958 MHz combined PA/LNA match) $100.00 Yes -

Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.

Check Inventory & Purchase

View Sales and Distribution Offices

沪ICP备09046653号
content here.
content here.

Review this Product

Close